Rake Brook Reservoir is a reservoir fed by two streams, including the eponymous Rake Brook, a tributary of the River Roddlesworth in Lancashire, England.
| Rake Brook Reservoir | |
|---|---|
.jpg) View across the reservoir | |
  Rake Brook Reservoir Shown within Chorley Borough | |
| Location | Lancashire |
| Coordinates | 53°41′42″N 2°32′12″W / 53.69500°N 2.53667°W |
| Type | reservoir |
| Primary inflows | Rake Brook |
| Basin countries | United Kingdom |
The reservoir is adjacent to the two Roddlesworth Reservoirs. It was constructed in the 1850s by Thomas Hawksley for Liverpool Corporation Waterworks, and was designed to hold compensation water to maintain flows in the rivers, whereas the reservoirs at Lower Rivington, Upper Rivington and Anglezarke held water for the public water supply. Water from the reservoir was fed into Anglezarke reservoir by a 3.75-mile (6.04 km) channel called The Goit.[1]
Construction of the reservoir was authorised by an Act of Parliament obtained in 1847, and the engineer Thomas Hawksley designed an earth dam which was 85 feet (26 m) tall at its highest point and 1,490 feet (450 m) long. The reservoir was finished in 1857, and impounded 73 million imperial gallons (330 Ml) of water when full.[2]
Bibliography
edit- Binnie, G M (1981). Early Victorian Water Engineers. Thomas Telford. ISBN 978-0-7277-0128-2.
References
edit- ^ Binnie 1981, pp. 138–140.
- ^ Binnie 1981, p. 283.
 | This Lancashire location article is a stub. You can help Wikipedia by expanding it. |