Dennis Eagle Limited is an English garbage truck manufacturer owned by Terberg Environmental.

Dennis Eagle
Company typeManufacturer
Founded1907
ProductsGarbage trucks
ParentTerberg Group, Ros Roca
SubsidiariesDennis Eagle Inc

Overview

edit
 
Elite 6 chassis with Olympus body
 
2011 Elite 2 chassis with Olympus body
 
Elite 2 chassis with Phoenix 2 body
 
Elite chassis with Phoenix body

Before operations were merged with Terberg Environmental, Dennis Eagle employed a workforce of over 600 across its two manufacturing sites and service network, which included nine depots as well as mobile engineers based throughout the UK. Body and chassis assembly took place at the Warwick headquarters, with cabs built at the additional manufacturing facility in Blackpool. Producing over 1,000 refuse collection vehicles each year, the company also had an international network of distributors.[citation needed]

In addition to domestic success, Dennis Eagle vehicles are now used globally, with their refuse collection trucks being sold in markets such as Australia, New Zealand, and parts of Asia, reflecting their growing international presence.[1]

History

edit

Dennis Brothers had made specialised vehicles for municipal authorities from the early 1920s though they were primarily builders of chassis for buses, fire engines and haulage lorries.

Eagle Engineering Company, agricultural and general engineers of Warwick, was incorporated in 1907. It made oil and petrol internal combustion stationary engines and some small agricultural equipment and provided municipalities with refuse vehicles and road sweepers and tower lorries at relatively inexpensive prices sometimes built on Dennis chassis. Soon after the start of the Great Depression Eagle turned from engines to building road trailers and semi-trailers for articulated vehicles. They also added an electrical and wireless department and produced Chakophone wireless sets until 1936. Ownership changed a number of times during the 1960s.[2]

Dennis Eagle's history goes back to the autumn of 1971 when Hestair Group bought Yorkshire Vehicles Limited in Leeds and Eagle Engineering Co in Warwick.[3] Six months later Hestair bought Dennis Motor Holdings[4] and thereafter managed the businesses as the Vehicle Division of Hestair Engineering. Municipal bodies were made in Warwick by Hestair Eagle (incorporating Yorkshire Vehicles), municipal chassis were made by Dennis in Guildford, cabs were made in Blackpool.

Hestair set up a special Environmental Vehicles Division for its waste management activities.[5] In 1985 Hestair moved municipal chassis manufacture from the Dennis plant at Guildford to a new 125,000 square foot plant on the Heathcote Industrial Estate at Warwick. They were joined there by Hestair Eagle's municipal bodies operations which moved across Warwick from Saltisford. The new Dennis Eagle plant was the largest refuse vehicle manufacturing site in Europe.[6][7][8] In 1991 Shelvoke & Drewry's design rights were bought from the receiver.

Environmental Vehicles, Dennis Eagle, now represented around one-third of Hestair's Vehicle Division. Following more changes of parent company (Hestair to Trinity to Dennis Group to Mayflower) Dennis Eagle was sold in July 1999 to NatWest Equity Partners.[9] In January 2004, Dennis Eagle was purchased by ABN Amro.[10]

In 2007, Dennis Eagle was purchased by Ros Roca.[11] Ros Roca and Terberg Environmental then merged in 2016, with Terberg holding the controlling interest. The various companies within the new group retained their trading names. [12][13]

In 2019, Dennis Eagle introduced the eCollect, an all-electric refuse collection vehicle, aimed at reducing emissions and supporting sustainable waste management practices. The eCollect has since been adopted by multiple local authorities in the UK, making Dennis Eagle a leader in environmentally friendly waste solutions.[14]

In 2021, Dennis Eagle entered the North American market as "Dennis Eagle US" with their new ProView chassis being built at a new facility in Summerville, South Carolina.[15]

In 2024, Dennis Eagle sold a record breaking 151 new Elite+ vehicles to Birmingham City Council.[16] These new vehicles aim to replace the councils outdated vehicles that are beyond their operational lifespan.

Dennis Eagle UK products

edit
From To Name Type Significance
? ? Pax (I to V) Chassis
? ? Paxit (I to IV & Major) Body
? ? Bulkmaster Body
1988 1992 Delta (Municipal) Chassis The Perkins Phaser 180 engine and partially synchromeshed Eaton gearbox and imroved cab ergonomics reduced the physical demand on the driver while boosting the serviceable lifetime.
1979 2001 Phoenix Body Rear loading RCV featuring intermittent 'sweep-slide' packer. Most rode on the Dennis Delta chassis from 1979-92, which used the joint cab design shared with Shelvoke & Drewry (whose corresponding version as known as the "P-type".
1992 2003 Elite Chassis The UK's first low entry cab, replaces the Delta/Municipal chassis.[17]
? ? Beta 500[18] Binlift
2001 2014 Phoenix 2 Body Replacement for the Phoenix, although closely based on the Ex-Cell model.
2003 2014 Elite 2[19] Chassis
? Current Beta 2[20] Binlift
2010 Current Olympus[21] Body A minor upgrade from the Phoenix 2 resulting from the merger with Ros Roca. Available in many sizes.
2010 Current Olympus Twin Pack[21] Body Two body compartments that can individually hold different types of waste.
2010 Current Olympus Duo[21] Body Two waste compartments. Essentially a smaller Olympus with a pod at the front.
2010 Current Olympus Mini[21] Body Compact version of the Olympus intended to be mounted on smaller chassis.
2012 Current Olympus One Pass[21] Body Three waste compartments. Essentially a smaller Olympus Twin Pack with a pod.
2013 2021 Elite 6 Chassis The name reflects it's Euro 6 compliance.
2019 Current eCollect[22] Chassis World's first OEM Electric RCV.
2021 Current Elite+[23] Chassis

Dennis Eagle Inc (North America) products

edit

Dennis Eagle Inc, also known as Dennis Eagle US, began production of the ProView chassis at a new facility in Summerville, South Carolina[15] in 2021. The plant manufactures ProView chassis for distributors in the USA and Canada.

From To Name Type Significance
2021 Current ProView Chassis The ProView chassis is designed specifically for the North American market. Derived from the Elite 6, it offers unmatched driver visibility and safety, with a design fully tailored to meet American needs. This includes stronger chassis rails, a more powerful Cummins powertrain, and proudly sourced parts from American suppliers.

Dennis Eagle Australia products

edit

Dennis Eagle produces chassis for the Australian market at it's headquarters in Warwick, England. These are shipped to Australia are distributed and sold by Penske Australia & New Zealand.

From To Name Type Significance
? 2022 Elite 2 (Australia) Chassis
2022[24] Current Elite 6 (Australia) Chassis

References

edit
  1. ^ "About". www.dennis-eagle.co.uk. Retrieved 2 November 2024.
  2. ^ Woods, Barrie (1998), Municipal Refuse Collection Vehicles, Trans Pennine Publishing, ISBN 9780952107040
  3. ^ Hestair acquires Eagle Engineering The Times 19 October 1971 page 21
  4. ^ Hestair offers £3.4m for Dennis Motors The Times 28 March 1972 page 19
  5. ^ Torbay Conference Commercial Motor 8 June 1973 page 57
  6. ^ 450 Jobs to Go The Times 16 March 1985 page 2
  7. ^ Dennis moves Commercial Motor 23 March 1985 page 6
  8. ^ Restructured team installed at Hestair Commercial Motor 26 October 1985 page 13
  9. ^ Natwest subsidiary buys Dennis Eagle Commercial Motor 5 August 1999
  10. ^ Eagle strike Commercial Motor 15 January 2004
  11. ^ Harrington, Ben (8 December 2006). "Spanish conglomerate ready to cart off Dennis Eagle". The Daily Telegraph. London. Retrieved 1 May 2010.
  12. ^ Boxall, Hannah (26 February 2016). "Dennis Eagle owner Ros Roca announces merger with Terberg Environmental". Resource. Resource Media. Retrieved 31 December 2016.
  13. ^ Terberg Ros Roca Group to be based in Warwick SMMT Newsletter 9 March 2016
  14. ^ "Full Electric RCV: eCollect". www.dennis-eagle.co.uk. Retrieved 2 November 2024.
  15. ^ a b "Specialist refuse truck maker Dennis Eagle enters US market".
  16. ^ "New lorries bought in bid to boost Birmingham bin collections". BBC News. 6 December 2024. Retrieved 7 December 2024.
  17. ^ Goundry, Andy (2020). Dennis Buses & Other Vehicles. ISBN 9781785007071.
  18. ^ "The Beta 500 Binlift" (PDF). Classic Refuse Trucks. Retrieved 1 March 2023.
  19. ^ "Returning to the CIWM" (PDF). Dennis Eagle. 2 May 2003. Archived from the original (PDF) on 19 September 2015. Retrieved 31 December 2016.
  20. ^ "Dennis Eagle Beta Bin lift". www.dennis-eagle.co.uk. Retrieved 22 May 2022.
  21. ^ a b c d e "Olympus Bodies RCVs". www.dennis-eagle.co.uk. Retrieved 22 May 2022.
  22. ^ "Full Electric RCV: eCollect". www.dennis-eagle.co.uk. Retrieved 22 May 2022.
  23. ^ "Elite+ Chassis". www.dennis-eagle.co.uk. Retrieved 22 May 2022.
  24. ^ "Why Dennis Eagle". Dennis Eagle. Retrieved 7 December 2024.
edit

  Media related to Dennis Eagle at Wikimedia Commons