The Cromarty Bridge is a road bridge over the Cromarty Firth in Scotland.
Cromarty Bridge | |
|---|---|
 Cromarty Bridge in February 2007, looking north | |
| Coordinates | 57°37′07″N 4°21′46″W / 57.618559°N 4.362913°W |
| OS grid reference | NH590690 |
| Carries | A9, two footways |
| Crosses | Cromarty Firth |
| Locale | Culbokie |
| Other name(s) | Cromarty Firth Bridge |
| Characteristics | |
| Design | Prestressed beams |
| Material | Concrete |
| Total length | 1464 metres (4803 feet) |
| No. of spans | 68 |
| Piers in water | 67 |
| History | |
| Construction start | December 1976 |
| Construction cost | £5 million |
| Opened | 1979 |
| Inaugurated | 12 April 1979 |
| Replaces | Round-trip via Dingwall |
| Location | |
 | |
History
editDesign
editThe bridge joins a junction with the B9163 to the south in Ross and Cromarty with a junction with the A862 to the north at Ardullie Point. It can clearly be seen from the north from the Far North Line.
Construction
editThe £4.5 million contract for the bridge was awarded in November 1976 from the Scottish Development Department.
The parapets were built by of Hi-Fab Ltd of Muir of Ord. The waterproofing was by Sifran Civil Engineering Ltd of Stourbridge. The site investigation was by Wimpey Laboratories of Broxburn, West Lothian.
A temporary structure was pushed out over the bridge piers, and from this, five pre-stressed concrete beams were placed between each pier. The temporary structure was removed and the road deck made with concrete.
Opening
editThe bridge was opened from the southern end on 12 April 1979. It became part of the A9 in 1982.