Alternative stress measures

In continuum mechanics, the most commonly used measure of stress is the Cauchy stress tensor, often called simply the stress tensor or "true stress". However, several alternative measures of stress can be defined:[1][2][3]

  1. The Kirchhoff stress ().
  2. The nominal stress ().
  3. The Piola–Kirchhoff stress tensors
    1. The first Piola–Kirchhoff stress (). This stress tensor is the transpose of the nominal stress ().
    2. The second Piola–Kirchhoff stress or PK2 stress ().
  4. The Biot stress ()

Definitions

edit

Consider the situation shown in the following figure. The following definitions use the notations shown in the figure.

 
Quantities used in the definition of stress measures

In the reference configuration  , the outward normal to a surface element   is   and the traction acting on that surface (assuming it deforms like a generic vector belonging to the deformation) is   leading to a force vector  . In the deformed configuration  , the surface element changes to   with outward normal   and traction vector   leading to a force  . Note that this surface can either be a hypothetical cut inside the body or an actual surface. The quantity   is the deformation gradient tensor,   is its determinant.

Cauchy stress

edit

The Cauchy stress (or true stress) is a measure of the force acting on an element of area in the deformed configuration. This tensor is symmetric and is defined via

 

or

 

where   is the traction and   is the normal to the surface on which the traction acts.

Kirchhoff stress

edit

The quantity,

 

is called the Kirchhoff stress tensor, with   the determinant of  . It is used widely in numerical algorithms in metal plasticity (where there is no change in volume during plastic deformation). It can be called weighted Cauchy stress tensor as well.

Piola–Kirchhoff stress

edit

Nominal stress/First Piola–Kirchhoff stress

edit

The nominal stress   is the transpose of the first Piola–Kirchhoff stress (PK1 stress, also called engineering stress)   and is defined via

 

or

 

This stress is unsymmetric and is a two-point tensor like the deformation gradient.
The asymmetry derives from the fact that, as a tensor, it has one index attached to the reference configuration and one to the deformed configuration.[4]

Second Piola–Kirchhoff stress

edit

If we pull back   to the reference configuration we obtain the traction acting on that surface before the deformation   assuming it behaves like a generic vector belonging to the deformation. In particular we have

 

or,

 

The PK2 stress ( ) is symmetric and is defined via the relation

 

Therefore,

 

Biot stress

edit

The Biot stress is useful because it is energy conjugate to the right stretch tensor  . The Biot stress is defined as the symmetric part of the tensor   where   is the rotation tensor obtained from a polar decomposition of the deformation gradient. Therefore, the Biot stress tensor is defined as

 

The Biot stress is also called the Jaumann stress.

The quantity   does not have any physical interpretation. However, the unsymmetrized Biot stress has the interpretation

 

Relations

edit

Relations between Cauchy stress and nominal stress

edit

From Nanson's formula relating areas in the reference and deformed configurations:

 

Now,

 

Hence,

 

or,

 

or,

 

In index notation,

 

Therefore,

 

Note that   and   are (generally) not symmetric because   is (generally) not symmetric.

Relations between nominal stress and second P–K stress

edit

Recall that

 

and

 

Therefore,

 

or (using the symmetry of  ),

 

In index notation,

 

Alternatively, we can write

 

Relations between Cauchy stress and second P–K stress

edit

Recall that

 

In terms of the 2nd PK stress, we have

 

Therefore,

 

In index notation,

 

Since the Cauchy stress (and hence the Kirchhoff stress) is symmetric, the 2nd PK stress is also symmetric.

Alternatively, we can write

 

or,

 

Clearly, from definition of the push-forward and pull-back operations, we have

 

and

 

Therefore,   is the pull back of   by   and   is the push forward of  .

Summary of conversion formula

edit

Key:    

Conversion formulae
Equation for            
              (non isotropy)
              (non isotropy)
             
             
             
    (non isotropy)   (non isotropy)        

See also

edit

References

edit
  1. ^ J. Bonet and R. W. Wood, Nonlinear Continuum Mechanics for Finite Element Analysis, Cambridge University Press.
  2. ^ R. W. Ogden, 1984, Non-linear Elastic Deformations, Dover.
  3. ^ L. D. Landau, E. M. Lifshitz, Theory of Elasticity, third edition
  4. ^ Three-Dimensional Elasticity. Elsevier. 1 April 1988. ISBN 978-0-08-087541-5.