The ZX81 character set is the character encoding used by the Sinclair Research ZX81 family of microcomputers including the Timex Sinclair 1000 and Timex Sinclair 1500. The encoding uses one byte per character for 256 code points. It has no relationship with previously established ones like ASCII or EBCDIC, but it is related though not identical to the character set of the predecessor ZX80.
Language(s) | English with pseudographics |
---|---|
Created by | Sinclair Research |
Preceded by | ZX80 character set |
Succeeded by | ZX Spectrum character set |
Printable characters
editThe character set has 64 unique glyphs present at code points 0–63. With the most significant bit set the character is generated in inverse video; corresponding to code points 128–191. These 128 values are the only displayable ones allowed in the video memory (known as the display file). The remaining code points (64–127 and 192–255) are used as control characters such as 118 for newline or, uniquely to Sinclair BASIC, for keywords, while some are unused.
The small effective range of only 64 unique glyphs precludes support for Latin lower case letters, and many symbols used widely in computing such as the exclamation point and the at sign. The lack of an apostrophe led some software authors to use a comma instead.
There are 11 block graphics characters, counting code point 0 which also doubles as space. The first 8 of these together with their 8 inverse video versions (16 code points) provide every combination of the character cell divided into 2×2 black-and-white block pixels for low-resolution 64×48 pixel graphics. These 2×2 blocks are present in the Block Elements Unicode block. An additional 3 characters provide a cell divided into 1×2 black, white or dithered gray wide block pixels. These, in combination with their inverse video versions and some of the previous 2×2 blocks provides for a 32×48 resolution with 3 levels (white, dithered gray, black). The basic 11 characters plus their inverse video versions, makes for 22 block graphics characters in total. The dithered characters (of which there are 6) are also available in Unicode (mostly in the Symbols for Legacy Computing block), but only in Unicode versions 13.0 and newer, available from 2020 onwards.
Code point 11 is the double-quote (") symbol when used in the display file. The BASIC function CHR$ 192
prints as the same character but is shown as "" in BASIC source listings; it is used for including the literal " character in a string without conflict with the " string delimiter.[1]
Changes from the ZX80
editThe character set in the ZX81 was derived from the ZX80 character set. They have mostly the same code points, e.g. for A-Z and 0-9, but the code points are different for the block graphics characters, the symbols ", -, +, *, /, =, >, <, and the BASIC keyword tokens (with many new added). There are also changes to the control characters. Code point 1 is no longer an unprintable string terminator. The ZX81 8K BASIC ROM was also available as an upgrade for the ZX80, replacing its integer-only 4K BASIC ROM.[2]
The ZX81 system font uses an 8×8 pixel-per-character grid where most glyphs fit in 6×6 pixels leaving two pixels horizontal and vertical space between rows and columns. The ZX80's ROM which had slightly wider 7×6 pixel glyphs with only one pixel horizontal space between them. Some glyphs also received a different design in the ZX81 system font, noticeable on the *, the slashed and less rounded 0, and the less rounded $, C, G and J.
In the later ZX Spectrum the entire character encoding was replaced with the ZX Spectrum character set, which is a derivative of ASCII and includes lower case letters and more.
Character set
editThe following table shows the ZX81 character set. Each character is shown with a potential Unicode equivalent. Space and control characters are represented by the abbreviations for their names.
0 | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | A | B | C | D | E | F | |
0x | SP | "[a] | £ | $ | : | ? | ||||||||||
1x | ( | ) | > | < | = | + | - | * | / | ; | , | . | 0 | 1 | 2 | 3 |
2x | 4 | 5 | 6 | 7 | 8 | 9 | A | B | C | D | E | F | G | H | I | J |
3x | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z |
4x | RND | INKEY$ | PI | |||||||||||||
5x | ||||||||||||||||
6x | ||||||||||||||||
7x | UP | DOWN | LEFT | RIGHT | graphics | EDIT | newline | rubout | K/L MODE |
function | number | cursor | ||||
8x | " | £ | $ | : | ? | |||||||||||
9x | ( | ) | > | < | = | + | - | * | / | ; | , | . | 0 | 1 | 2 | 3 |
Ax | 4 | 5 | 6 | 7 | 8 | 9 | A | B | C | D | E | F | G | H | I | J |
Bx | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z |
Cx | ""[a] | AT | TAB | CODE | VAL | LEN | SIN | COS | TAN | ASN | ACS | ATN | LN | EXP | INT | |
Dx | SQR | SGN | ABS | PEEK | USR | STR$ | CHR$ | NOT | **[b] | OR | AND | <=[c] | >=[d] | <>[e] | THEN | TO |
Ex | STEP | LPRINT | LLIST | STOP | SLOW | FAST | NEW | SCROLL | CONT | DIM | REM | FOR | GOTO | GOSUB | INPUT | LOAD |
Fx | LIST | LET | PAUSE | NEXT | POKE | PLOT | RUN | SAVE | RAND | IF | CLS | UNPLOT | CLEAR | RETURN | COPY | |
See also
editNotes
edit- ^ a b Code point 11 is the double-quote (") symbol when used in the video memory (called the display file). Code point 192,
CHR$ 192
, prints as the same character but shows as "" in BASIC listings and is used for including the literal " character in a string without conflict with the " string delimiter.[1] - ^ The raise to a power multi-character operator tokenized into a single-byte code point.
- ^ The greater than or equal to multi-character operator tokenized into a single-byte code point.
- ^ The less than or equal to multi-character operator tokenized into a single-byte code point.
- ^ The not equal sign multi-character operator tokenized into a single-byte code point.
References
edit- ^ a b c Vickers, Steven (1981). Sinclair ZX81 BASIC Programming. Sinclair Research Ltd.
- ^ "8K BASIC ROM UPGRADE".
- ^ Wearmouth, Geoff. "An Assembly Listing of the Operating System of the ZX81 ROM". Archived from the original on August 15, 2015.