State Route 459 (SR 459) is a state highway in Henderson County, Tennessee, that serves as a bypass of Lexington. The route connects U.S. Route 412 (US 412) to SR 22, and opened to traffic in 2023.
 State Route 459 | ||||
|---|---|---|---|---|
| Route information | ||||
| Maintained by TDOT | ||||
| Length | 5.2 mi[1] (8.4 km) | |||
| Major junctions | ||||
| West end |  US 412 near Lexington | |||
| East end |  SR 22 near Lexington | |||
| Location | ||||
| Country | United States | |||
| State | Tennessee | |||
| Counties | Henderson | |||
| Highway system | ||||
| ||||
Route description
editSR 459 is a two-lane road for its entire length, and is commonly referred to as the Lexington Bypass. It begins at an at-grade intersection with US 412 a few miles west of downtown Lexington. Here, westbound traffic on US 412 continues freely onto SR 459, and must make a turn to remain on the former route. The route runs south, and then southeast, before reaching an intersection with the eastern terminus of SR 200 a few miles later. Shifting eastward, the route has an intersection with SR 22A a short distance beyond. A short distance later, SR 459 reaches its eastern terminus at an intersection with SR 22 a few miles south of downtown Lexington.
History
editThe Lexington Bypass was planned as a continuation of the widening and improvements to US 412 between Lexington and Columbia, which was initiated by the Better Roads Program by Tennessee Governor Lamar Alexander in 1986.[2] Right-of-way plans were finalized in 2007.[3] The contract for the first phase of the bypass between US 412 and SR 22 was awarded on December 23, 2019,[4] and construction began in March 2020.[5] In addition to the construction of the new road, the section of US 412 at the intersection of the bypass was reconfigured to allow direct flow onto the bypass from the westbound lanes. The northern terminus of SR 200 was also truncated from SR 22A to SR 459 and the former northern terminus modified; the former section of SR 200 north of SR 459 was turned over to local control. The road was expected to be complete in October 2022, but experienced many delays, and did not open until June 29, 2023.[6] The route cost approximately $37 million to construct.[1][7] SR 459 is planned to be extended east to US 412 east of Lexington.
Major intersections
editThis section is missing mileposts for junctions. |
The entire route is in Henderson County.
| Location | mi | km | Destinations | Notes | |
|---|---|---|---|---|---|
| | 0.0 | 0.0 | US 412 – Lexington, Jackson | Western terminus | |
 SR 200 | Northern terminus of SR 200 | ||||
| Lexington |  SR 22A | ||||
| 5.2 | 8.4 | SR 22 – Lexington, Adamsville | Eastern terminus | ||
| 1.000 mi = 1.609 km; 1.000 km = 0.621 mi | |||||
References
edit- ^ a b Evans, Garrett (January 12, 2023). "TDOT gives update on new bypass". Jackson, Tennessee: WBBJ-TV. Retrieved June 1, 2024.
- ^ "State Route 459 (US 412) Lexington Bypass". Tennessee Department of Transportation. Archived from the original on January 12, 2018. Retrieved June 1, 2024.
- ^ "State Route 459 (US 412) Lexington Bypass - Timeline". Tennessee Department of Transportation. Archived from the original on January 12, 2018. Retrieved June 1, 2024.
- ^ Crook, W. Clay (December 31, 2019). "Lexington Bypass Update". The Lexington Progress. Retrieved June 1, 2024.
- ^ Corlew, Steve (May 17, 2023). "TDOT Gives Status Report on Henderson County Projects". The Lexington Progress. Retrieved June 1, 2024.
- ^ Corlew, Steve (June 28, 2023). "Lexington Bypass Opens June 29th After Many Delays". The Lexington Progress. Retrieved June 1, 2024.
- ^ Peppers, Kyle (June 15, 2023). "Lexington Bypass nears completion, mayor urges caution near construction sites". Jackson, Tennessee: WBBJ-TV. Retrieved June 1, 2024.