 | This template uses Lua: |
{{Infobox mill building}} may be used to summarize information about a building. It can be used in two ways with named parameters or with ten unnamed parameters.
Usage
edit{{Infobox mill building
| name =
| building_name =
| native_building_name =
| alternate_names =
| image =
| caption =
| textile_type =
| building_type =
| architectural_style =
| structural_system =
| cost =
| employees =
<!-- For titles and maps-- geo info-->
| location =
| altitude =
| map_type =
| serving_canal =
| serving_railway =
| serving_river =
| owner =
| owner_2 =
| acquisition_date_2 =
| owner_3 =
| acquisition_date_3 =
| owner_4 =
| acquisition_date_4 =
| current_tenant =
| current_owner =
| coordinates = <!-- {{coord}} -->
| oscoor =
| start_date =
| completion_date =
| renovation_date = <! or re-equipment_date_1 -->
| re-equipment_date_2 =
| re-equipment_date_3 =
| current_status =
| demolition_date =
| destruction_date =
<!-- Dimensions-->
| height =
| other_dimensions =
| floor_count =
| floor_area =
| floor_height =
| floor_usage =
<!-- The building team -->
| main_contractor =
| architect =
| architecture_firm =
| structural_engineer =
| other_designers =
| awards =
| ren_cost =
<!-- Steam powered-->
| engine_date =
| engine_decommissioned =
| engine_maker =
| engine_type =
| engine_valve =
| engine_cylinder =
| engine_rpm =
| engine_kWatt =
| engine_ihp =
| engine_fly_diameter =
| transmission_type =
| no_of_ropes =
| boilers =
| boiler_temperature =
| psi =
<!-- Watermills -->
| wheels =
| diameter_of_water_wheel =
| width_of_wheel =
| wheel_rpm =
<!-- Equipment-->
| equipment_maker =
| date_of_equipping =
| no_of_looms =
| cotton_count =
| scutchers =
| carding_engines =
| doublers =
| kiers =
| other_equipment =
| mule_frames =
| ring_frames =
<!-- References-->
| embedded =
| references =
}}
Parameters
editUnnamed parameters
- Mill name
- Location
- Coordinate
- Reference
- Notes- Description (not yet displayed)
- Image
- Architect/Owner (some lists use different info (not yet displayed)
- Built
- Decommissioned
- Demolished
The purpose of this is to allow lists of mills to be constructed using the {{TMbegin}}, {{TMtr}}, {{TMend}} sequence. The {{TMtr}} can be copied directly across into a new article and renamed {{Infobox mill building}} as the unnamed parameters transfer directly across. The new Infobox can then be edited, and as new data is input it will over-ride potentially conflicting parameters. Similarly, any {{Infobox mill building}} named-parameters can safely be added to a {{TMtr}} call, as they will be safely ignored while on the list page- but will then be valid here if a copy is made.
The named parameters are seen in the section below.
Example
edit Regent Mill in 1950 | |
| Cotton | |
|---|---|
| Spindles | 60000 |
| Spinning (ring mill) | |
| Current status | Standing, usage changed |
| Structural system | Red engineering brick |
| Location | Failsworth, Oldham |
| Serving canal | Rochdale Canal |
| Serving railway | Oldham Loop Line |
| Further ownership |
|
| Coordinates | SD789345 |
| Construction | |
| Built | 1906 |
| Demolished | Chimney 1964 |
| Floor count | 4 |
| Floor area | 345 by 130 feet (105 by 40 m) |
| Floor usage | In 1950:
|
| Other dimensions | Chimney 210 feet (64 m) |
| Design team | |
| Architect | George Stott |
| Power | |
| Date | 1906 |
| Engine maker | Buckley and Taylor of Oldham |
| Decommissioned | 1958 |
| Engine type | marine type vertical triple expansion engine |
| Cylinder diameter and throw | 63-inch diameter low-pressure cylinder |
| rpm | 64 |
| Installed horse power (ihp) | 1800 ihp sometimes loaded to 2000 ihp |
| Flywheel diameter | 26 feet (7.9 m) |
| Transmission type | rope |
| No. of ropes | 26 ropes |
| Boiler configuration | |
| Boilers | ? Dual Lancashire ? |
| Mule Frames | 60000 |
| References | |
| Dunkerley, Philip. "Dunkerley-Tuson Family Website, The Regent Cotton Mill, Failsworth". Retrieved 2009-01-09. | |
{{Infobox mill building
| building_name = Regent Mill
| native_building_name =
| alternate_names =
| image = Mill-image-pending.jpg
| caption = Regent Mill in 1950
| textile_type = [[Cotton]]
| building_type = [[Cotton-spinning machinery|Spinning (ring mill)]]
| architectural_style =
| structural_system = Red engineering brick
| cost =
| location = [[Failsworth]], Oldham
| serving_canal = [[Rochdale Canal]]
| serving_railway = [[Oldham Loop Line]]
| owner =
| owner_2 = LCC
| acquisition_date_2 = 1930
| owner_3 = Salton
| acquisition_date_3 =
| owner_4 =
| acquisition_date_4 =
| current_tenant =
| coordinates = {{coord|53.5087|-2.1604|display=inline|region:GB|format=dms}}
| oscoor = SD 789345
| altitude =
| start_date = 1906
| completion_date =
| renovation_date =
| demolition_date = Chimney 1964
| current_status = Standing, usage changed
| height =
| other_dimensions = Chimney {{convert|210|ft|m}}
| floor_count = 4
| floor_area = {{convert|345|by|130|ft|m}}
| floor_height =
| floor_usage = In 1950:
*cellar: a warehouse, yarn cellar, waste room, cotton room, and dust room.
*The first floor was the card room,
*The second floor was the ring frame room
*The third
| architecture_firm =
| structural_engineer =
| other_designers =
| awards =
| engine_date = 1906
| engine_decommissioned = 1958
| engine_maker = [[Buckley and Taylor of Oldham]]
| engine_type = marine type vertical triple expansion engine
| engine_valve =
| engine_cylinder = 63-inch diameter low-pressure cylinder
| engine_rpm = 64
| engine_kWatt =
| engine_ihp = 1800 ihp sometimes loaded to 2000 ihp
| engine_fly_diameter = {{convert|26|ft|m}}
| transmission_type = rope
| no_of_ropes = 26 ropes
| boilers = ? Dual Lancashire ?
| boiler_temperature =
| psi =
| spindles = 60000
| references = {{cite web|url=http://dunkerley-tuson.co.uk/regentmill.aspx|title=Dunkerley-Tuson Family Website, The Regent Cotton Mill, Failsworth|last=Dunkerley|first=Philip|accessdate=2009-01-09}}
}}
Microformat
editThe HTML markup produced by this template includes an hCard microformat, which makes the place-name and location parsable by computers, either acting automatically to catalogue articles across Wikipedia, or via a browser tool operated by a person, to (for example) add the subject to an address book. Within the hCard is a Geo microformat, which additionally makes the coordinates (latitude & longitude) parsable, so that they can be, say, looked up on a map, or downloaded to a GPS unit. For more information about the use of microformats on Wikipedia, please see the microformat project.
Sub-templates
editIf the place or venue has "established", "founded", "opened" or similar dates, use {{start date}} for the earliest of those dates unless the date is before 1583 CE.
If it has a URL, use {{URL}}.
Please do not remove instances of these sub-templates.
Classes
edithCard uses HTML classes including:
- adr
- agent
- category
- county-name
- extended-address
- fn
- label
- locality
- nickname
- note
- org
- region
- street-address
- uid
- url
- vcard
Geo is produced by calling {{coord}}, and uses HTML classes:
- geo
- latitude
- longitude
Please do not rename or remove these classes nor collapse nested elements which use them.
Precision
editWhen giving coordinates, please use an appropriate level of precision. Do not use {{coord}}'s |name= parameter.