Talk:Injection moulding
![]() | This article is written in British English, which has its own spelling conventions (colour, travelled, centre, defence, artefact, analyse) and some terms that are used in it may be different or absent from other varieties of English. According to the relevant style guide, this should not be changed without broad consensus. |
![]() | Injection moulding has been listed as one of the Engineering and technology good articles under the good article criteria. If you can improve it further, please do so. If it no longer meets these criteria, you can reassess it. | |||||||||
|
![]() | This ![]() It is of interest to the following WikiProjects: | ||||||||||||||||||||||||
|
Overview image(image)
editAdded a overview of the Injection Molding Machine I can add anything that you believe is missing and is imperative to understanding the process.--UofAIndustrialDesign (talk) 06:19, 26 February 2009 (UTC)
This area needs huge improvement. Take for instance the sentence " Plastic resin enters the mold through a sprue in the injection mold; the sprue bushing is to seal tightly against the nozzle of the injection barrel of the molding machine and to allow molten plastic to flow from the barrel into the mold, also known as the cavity." What is - a sprue bushing - nozzle of the injection barrel - injection barrel
Also, how is it possible to write an article on Injection Moulding without once mentions a Sleeve or a Rotating Core?
artificial flower (image)
editsorry, but the given image does not show artiffical flower which has been made with Injection molding. that might be true for the green leaves beneath but the flowers itself are realy not a very good example for an mold making product. Adaso 14:38, 23 May 2006 (UTC)
On Spelling
editI would disagree again. I am currently working for a plastic molding company in US, and we design, fix, and develop tooling CAD files for our customers (Intel, Panasonic, Gen-Probe, Crestron, Titleist, etc...), then we send the files to a Tooling, Molding factory in China and have their engineers look at them, make sure they are with in spec, then they proceed to make the tools and parts for us. I am sure Chinese technical expertise is not an issue in this industry.
I would disagree on the China bit. Most of the mould tools are made out there (it's cheaper to make them in China and ship them across to the UK, bizarrely). However, a lot of moulding still takes place in the UK - if memory serves, the Chinese don't have quite the technical expertise.
Anyway, the best article on injection moulding seems to be in Spanish....Ronaldson 11:35, 30 October 2007 (UTC)
As of June 8, 2006, Google.com reports: 1.9 million hits for "Injection Moulding" 5.7 million hits for "Injection Molding"
Just want to make sure we all know how language works - language is what people are using. It has always been this way, and it always will be that way. There is no "right way". The Queen's English is part of a repressive regime which most of the time only serves to accentuate class boundaries. This can stifle progress.
At the end of the day, we use what most people use. That means some things get left behind. Sorry, that's the way the world works. Using the minority spelling here is some kind of grab for respect, which, you know, you probably should get at home or something. :)
Shouldn't this article be in Chinese anyway? Most of the world's injection molding is happening there. —The preceding unsigned comment was added by Mlprater (talk • contribs) 14:51, June 8, 2006.
- It seems to have been created that way, but there have been a couple edits to change mold to mould [1]. The split of how pages link to this subject is mixed, I count 45 through "mold" and variants, and 43 through "mould". Should someone just be bold? --GargoyleMT 20:25, 2 October 2006 (UTC)
- This got me too. I was wondering why the more popular (not to mention American, where Wikipedia originated and is hosted) is not used for this article. JettaMann 19:10, 26 February 2007 (UTC)
~"The Queen's English is part of a repressive regime which most of the time only serves to accentuate class boundaries."
~Ya got to love this guy's sense of humor. —The preceding unsigned comment was added by 130.36.62.140 (talk • contribs) 11:53, February 1, 2007 (UTC)
- Shouldn't that be "humour"? —Preceding unsigned comment added by 70.71.135.43 (talk • contribs) 02:25, March 18, 2007
I moved the page, following yet another mould -> mold edit. The numbers weren't as large as quoted above, for google results (1.39 vs 1.21), but I think this spelling is the more prevalent one. --GargoyleMT 20:45, 24 April 2007 (UTC)
I just read the main article and since my native language is not English I was confused with the different spellings of moulding/molding. I therefore went to the "Talk page" to see if there were some clarification to be found here. But what I found is that even the authors of the text seem to fight over which is the "correct" spelling, citing google and other sources. I therefore strongly suggest that a sentence is added to the very beginning of the article which simply states that molding and moulding is both commonly used and it depends on the region/nationality where English is spoken. If that statement is made in the beginning then you would not have to "correct" the rest of the article as it now mixes the two spellings, hopefully the reader knows that articles on Wikipedia is often written by several authors from different regions. EV1TE (talk) 11:22, 17 October 2016 (UTC)
Reverted Change from Quickparts
editQuickparts - Injection Molding is a commerical site. It contains no technical or informative resources. It has therefore, been reverted to previous revision. Does anyway see a reason why this link should be kept? BeastRHIT 01:21, 27 July 2006 (UTC)
beryllium copper
editSince my last attempt at toning down the beryllium copper addition was reverted, could someone (perhaps the author) try an alternate approach? The addition seems to build up to the mention of a disease associated with machining the material, I'm not sure if it is intentional or not. I think this mold material (and the disease) have a lot more coverage than the other types, given its real world usage. However, my experience is limited, since I see mostly prototype tools made from Aluminum. --GargoyleMT 13:37, 2 January 2007 (UTC)
- Aluminum is used in prototype or limited run molds,it does not wear well over long periods, where as beryllium copper is found more commonly in proven production (high part count) molds. I will, however, agree that the passage pertaining to the 'disease' was somewhat tangiential. —Preceding unsigned comment added by 70.71.135.43 (talk • contribs) 02:27, March 18, 2007
Cavitation?
editFrom the article... The number of "impression" in the mold of that part is refered to as cavitation. I work in the industry, and have never heard this particular term used. Generally we just refer to a mold having multiple cavities. Also, it doesn't seem to be supported by any of the online dictionaries. If someone can say for certain that this is indeed a proper usage of cavitation, I'll leave it alone, but if I don't hear back, I'll change it. NipokNek 18:03, 15 January 2007 (UTC)
- I've only heard of them being "cavities." If the text is changed, the references to "core and cavity" will be a bit ambiguous; is there a better term to use in place of this one? --GargoyleMT 22:40, 15 January 2007 (UTC)
- I've read it over, mentally removing the line about cavitation, and it's still seems coherent to me. I'm only talking about removing that one sentence, not every instance of "cavity." And as far as I know, there is no group term for multiple mold cavities. NipokNek 11:34, 16 January 2007 (UTC)
- My question was a minor point, of "cavity" meaning both the negative of the part as well as one half of the mold, and whether a better term could be used to reduce confusion. As far as multiple cavity molds having a name, "family molds" are already covered. I've heard of multiple cavity molds of the same part being called "gang molds", but I'm not sure how widespread the use of that term is. --GargoyleMT 13:39, 16 January 2007 (UTC)
- US Auto molders use "cavitation" as well. Mstefaniak (talk) 20:23, 29 April 2009 (UTC)
I work in the both the area of mold manufacture and injection molding. Here in Ireland and elsewhere in Europe, we commonly use the term "cavitation" as meaning "number of cavities". Your second point does point towards some ambiguity in the sense that "cavity" refers to the number of component impressions and to the female or negative mold section (normally injection side). I would suspect that people in the industry would have no trouble with the meanings in context, however in the interest of general understanding the terms "impression" for number of parts and "cavity" for negative mold section may be clearer. "Family molds" generally produce differing molded components per cycle and I would personally refer to multiple cavity molds of the same component as "multi-cavity" or "multi-impression". I have never heard the term "gang molds" used in Europe. Brianpmurphy 14:20, 1 March 2007 (UTC)
Nomenclature
editIt would be nice if someone would show an exploded view of an injection mold showing the names of its parts.130.36.62.140 16:56, 1 February 2007 (UTC).
Good suggestion, I have access to some 3D models that I can dumb down for sake of simplicity and create some images with it. I however suspect that creating the correct nomenclature (naming) for parts is likely going to generate a large amount of discussion. (Cavity and core is jut the tip of the Iceberg). When it come to molds naming varies a lot from company to another, from a region of the world to another. If there is suggestion how to handle that part, I'd welcome them. Britiju 03:33, 2 February 2007 (UTC)
Moulding Defect
editI am unsure about the terminology Silver Sleaks vs Splay Mark. I always considered them the same things but I am having a second thought about it. At the moment I have seperated them because of my doubt. When it comes to Splay as a stand alone word, again, I always considered it the same as Splay mark, but it might be used as two different things by molders; Any thoughts? Britiju 03:32, 2 February 2007 (UTC)
"Splay marks" are caused by a release of trapped water vapour in the injection process and are associated with hygroscopic materials which have not been adequately dried. Brianpmurphy 14:37, 1 March 2007 (UTC)
- Splay marks can also be caused by too fast an initial injection speed. AKA jetting. —Preceding unsigned comment added by 70.71.135.43 (talk • contribs) 02:27, March 18, 2007
The description for splay marks sounds more like the defect for "Gate Blush." We always refer to splay as the streaks created by moisture in the material (also known as silver streaks). I think this description should be used, I wont do the edit myself though as I no longer edit Wikipedia articles (too much politics, it's like a poorly run nation...)
Needs consistent spelling, better grammar
editThe article should not flip back and forth between "mould" amd "mold". The grammar needs fixing, as in "machine are". Italics are needed for "use-mention" distinction. Chris the speller 05:25, 3 February 2007 (UTC)
- Britiju has been adding new sections, and I've been copyediting them once his edits have subsided. I cleared up the section you probably had issue with. I also changed "mold" to "mould" everywhere it seemed applicable. Does this address your concerns? --GargoyleMT 15:12, 3 February 2007 (UTC)
Thanks to both Chris the speller and --GargoyleMT for help with the clean up of my newly added material. Since English is not my first language, I usually need several editing sessions to get things right gramatically (As close as it can be for me anyway). Keep up with this most appreciated help. Britiju 20:49, 3 February 2007 (UTC)
- If I change the meaning of anything you've put in, let me know (or correct it yourself). Your reorganization and expansion on this article is much appreciated. --GargoyleMT 00:47, 4 February 2007 (UTC)
I was thinking that the fact that there is a possibility that the plastic such as polypropylene or polyethelene (due to the material, the temperature of the die, or the lack of percision in the temperature) may stick to the molding forcing the technician, chemist, or intern to set the machine on semi automatic and manually remove the mold from the machine. Speaking from personal experience.
External link
editI was wondering why the link to http://www.custompartnet.com/wu/InjectionMolding was removed. I found it to be very informative. -mechen85
- I'm with you, I perused it and it looks like a fine addition to the external links. I'm going to dig through the edit history and try to find the point where it was removed, see if I can uncover a reason you or I have missed. Kierkkadon (talk) 22:18, 11 January 2013 (UTC)
Auger photo
editThis page would be improved by a picture of the auger from an injection molder. —Ben FrantzDale 19:47, 7 May 2007 (UTC)
- I've moved this request to the injection molding machine page, because that's where it belongs. Wizard191 (talk) 14:28, 18 April 2009 (UTC)
Help Needed: uppermost photo caption simplification
editThe first photo of the article shows a two piece die set which currently carries the following caption: "Standard two plates tooling - Core and Cavity are inserts in a mold base - "Family mold" of 5 different parts" .
Would the caption's author, or another person familiar with mold die design kindly clarify the caption's meaning for lay people reading the article? The current description is not clear. A simpler description is justified given that the photo is within the introductory paragraph of the article, and the article itself is a general introduction to the manufacturing process which is bound to be read by numerous lay people. Thanks if you can assist! —The preceding unsigned comment was added by 206.47.191.132 (talk) 17:07, August 20, 2007 (UTC)
Can another person revert this caption to its previous state which was, "An injection molding die (both male and female pieces) used for makeing auto indicator lamps." --UofAIndustrialDesign (talk) 04:36, 26 February 2009 (UTC)
Injection Molding Tool Class
editIn the United States at least, it appears that injection molding tools are roughly divided into 3 classes depending on overall quality. The notes I have are as follows:
- Class 101: Usually constructed with stainless steel base, cavities and cores. Life of greater than 1 million shots. Includes features like parting-line locks, and guided ejection. The most expensive class of tooling.
- Class 102: Constructed from softer steels, life of 500,000 shots.
- Class 103: Prototype-level tool. Made from non-hardened steels or aluminum. Short life. Cheap.
My source for this info is a training seminar I recently attended. I don't have any formally published sources. Is anybody else familiar with this nomenclature? Can we add this to the tool section, or should it have its own page? Thoughts? FusionKnight 15:34, 3 October 2007 (UTC)
- Possibe source for this information. FusionKnight 21:52, 18 October 2007 (UTC)
Surface Finish
editThis [link] lists some of the available surface finishes for injection molded parts. I'll try and create a section on this. Does anybody else have any more info, or better sources? FusionKnight 17:50, 18 October 2007 (UTC)
Proposed merge from Injection molding machine
edit- The following discussion is closed. Please do not modify it. Subsequent comments should be made in a new section. A summary of the conclusions reached follows.
- The result was do not merge. Wizard191 (talk) 23:03, 9 August 2009 (UTC)
I think this article doesn't cover anything that's really separate from the process itself. It should be integrated into Injection molding#Equipment Doodle77 (talk) 01:29, 30 March 2009 (UTC)
- Injection molding is already a 36k article, so I don't know if its really proper to add more to it. This seems like a decent start to what could be a big article. The info at injection molding could be merged into this article and then a nice little summary could be added. Wizard191 (talk) 12:43, 30 March 2009 (UTC)
- I disagree with the proposition. Someone could check out http://www.custompartnet.com/wu/InjectionMolding#equipment . in all, i think that there is enough material on this topic to permit an independent existence. i'm not hinting at copying text from that page. all i'm stating is that there is enough material out there. Techniche.Writers (talk) 19:23, 31 March 2009 (UTC)
Proposed External Link
editThere is a website that has a brief overview of the moulding process - http://www.rutlandplastics.co.uk/moulding_process.shtml with links to other pages on the mould tool, materials and moulding machine. Also on the site are more deatiled pages on materials and design guidelines. I think it would be useful to add this to the external links. RPoracle (talk) 07:49, 10 July 2009 (UTC)
Image gallery
editI don't see what the problem is with having the image gallery. There are a lot of good images here of a die plus the finished part, of which there are no other images like that in the article. Moreover, it shows much more typical die that doesn't include side pulls. The other image that doesn't show side pulls has such fine detail that its hard to tell what the die is even for. Finally, it shows what a multi-cavity mold, another first for the images. Wizard191 (talk) 01:14, 26 October 2009 (UTC)
Proposal to rewrite
editThis article contains a lot of great information, but it doesn't flow very well or feel completely encyclopedic. I'm considering completely rewriting it, consolidating a couple of sections, reorganizing the section hierarchy, that sort of thing. Turning the Process characteristics section in to prose and such. I don't want to eradicate any info, as I said this article is full of it. I just think it could be presented a tad better; this article seems like it's had a lot of people build it over a long period with little overall cohesion or cooperation. Any input would be welcome; I'll probably start it on my sandbox page (and of course I'll link to that once I do), and I encourage anybody with constructive additions and changes to make them there. As far as references go, fortuitously I have access to a good engineering library and so I should be able to verify and cite lots of content. Kierkkadon (talk) 16:31, 15 January 2013 (UTC)
Note: I will probably leave every section after this one alone, because those sections are all very well written, with good content (including images and tables) and citations. If I do anything to them, it will just be to group some of the section headings underneath something like Injection molding process or similar. Kierkkadon (talk) 16:40, 15 January 2013 (UTC)
- I was dumb when I wrote this, the only part of this article that needed rewriting was Process characteristics. I have rewritten it, as well as added references to support it. I also reformatted all the references in the article to give a uniform citation style across the board: I used
{{cite book}}
,{{cite web}}
, and{{rp}}
wherever applicable, and removed the Sources section because it became irrelevant as a result of my changes. --Kierkkadon talk/contribs 17:25, 23 January 2013 (UTC)
Picky picky non-sticky
editSorry to be picky, but in "Examples of polymers best suited for the process" it says all thermoplastics- but I'm not sure that PTFE can be injection moulded. Gravuritas (talk) 21:53, 26 September 2013 (UTC)
Injection moulding
editThis is not "British" English:
- Australia [2]
- France [3]
- Ireland [4]
- New Zealand [5]
- Nigeria [6]
- South Africa [7]
- Thailand [8] — Preceding unsigned comment added by 103.13.103.75 (talk) 07:36, 26 April 2014 (UTC)
- From the discussion above, #On spelling, it appears the page was moved to the mold spelling on the basis of google hits. This is not in accordance with policy when it comes to the spelling system to use in an article. I also see an argument that Wikipedia is American, particularly unacceptable reasoning. The relevant guideline is WP:ENGVAR, which advises to comply with the variety of English first established in the article. It was clearly created with this spelling. I propose to move it back to its original spelling. SpinningSpark 10:04, 21 November 2014 (UTC)
Disclosure
editAdditions to Examples of polymers and Mould Design sections on 12/23/14
I added two external links to the website of my employer Toolcraft Plastics (Swindon) Ltd in these sections. Both links lead to useful webpages providing background information. One provides a list of common polymers and their suitability for certain projects; the other provides a list of common mould tool types and an explanation of what they are.SvanLeeuwen (talk) 11:00, 23 December 2014 (UTC)
- I have reverted both of those. They were inserted as references, but neither is directly verifying any fact in the article. In any case, there are numerous printed books on injection moulding that would make much more acceptable sources so there is really no need for a link to any page on your company site. I suggest that in the future you restrict yourself to making suggestions here and not make any more direct edits to the article. SpinningSpark 14:27, 23 December 2014 (UTC)
Hi Spinningspark, OK I respect that and thank you for your advice.86.174.85.220 (talk) 09:21, 24 December 2014 (UTC)
Not one mention of decoupled molding???
editI find it curious that an article about Injection molding, doesn't once reference decoupled molding since it's basically used industry wide. Thoughts? War wizard90 (talk) 05:26, 9 January 2015 (UTC)
Curious content
editWhats with the use of you in this section, and the numbers that are included outside of the references? These probably need to be addressed. I will be taking care of the use of the word you, but, I am not sure what the numbers indicate. -- Orduin Discuss 22:19, 7 February 2015 (UTC)
- The numbers are an unconventional way of indicating page numbers within a ref. Cites, and the various {{sfnp}} templates, are better. Andy Dingley (talk) 22:24, 7 February 2015 (UTC)
- I figured, but wanted another opinion on them, thanks! However, it appears to me that the information in some sections (especially the ones I have addressed) was copied or closely paraphrased from a textbook. -- Orduin Discuss 22:28, 7 February 2015 (UTC)
External links modified
editHello fellow Wikipedians,
I have just modified one external link on Injection moulding. Please take a moment to review my edit. If you have any questions, or need the bot to ignore the links, or the page altogether, please visit this simple FaQ for additional information. I made the following changes:
- Added archive https://web.archive.org/web/20060412020436/http://www.yaskawa.com/site/Industries.nsf/applicationDoc/appinjmold.html to http://www.yaskawa.com/site/Industries.nsf/applicationDoc/appinjmold.html
When you have finished reviewing my changes, you may follow the instructions on the template below to fix any issues with the URLs.
This message was posted before February 2018. After February 2018, "External links modified" talk page sections are no longer generated or monitored by InternetArchiveBot. No special action is required regarding these talk page notices, other than regular verification using the archive tool instructions below. Editors have permission to delete these "External links modified" talk page sections if they want to de-clutter talk pages, but see the RfC before doing mass systematic removals. This message is updated dynamically through the template {{source check}}
(last update: 5 June 2024).
- If you have discovered URLs which were erroneously considered dead by the bot, you can report them with this tool.
- If you found an error with any archives or the URLs themselves, you can fix them with this tool.
Cheers.—InternetArchiveBot (Report bug) 01:55, 14 November 2017 (UTC)
Some proposed changes
editThe following Wikipedia contributor may be personally or professionally connected to the subject of this article. Relevant policies and guidelines may include conflict of interest, autobiography, and neutral point of view.
|
This edit request by an editor with a conflict of interest was declined. Please see the Reply section below for additional information about this request. |
Information to be added or removed: Please add the below section to the end of the "Examples of polymers best suited for the process" using this report as a reference.
There are also a wide range of bioplastic materials suitable for injection molding. Bioplastics are those plastics which come from biomass at the beginning of their life (i.e., bio-based plastics and biocomposites), those which biodegrade into biomass at the end of their life (i.e., biodegradable plastics), or both (i.e., biodegradable and bio-based). Bio-based plastics commonly used for injection molding include bio-based PET, starch-plastic composites and wood-plastic composites. Biodegradable polymers suited for injection molding include PBAT and PCL. PLA and PHA are examples of injection molding grade polymers which are both bio-based and biodegradable.
As with conventional plastics, bioplastics polymers can be alloyed and blended to achieve a wide array of physical properties, from enhanced tensile strength, flexural modulus or impact strength. PLA, for example, is generally thought of as a brittle material. A study revealed that PLA can be compounded with biodegradable thermoplastic elastomeric materials to modify the physical properties of PLA without compromising its compostability. At a ratio of 70% PLA and 30% biodegradable thermoplastic elastomer, the percent elongation increased 18.7%. At the same ratio, the impact strength of PLA increased more than 400%. In this way, bioplastic material manufacturers often customize blends and alloys of common polymers to achieve the required performance characteristics of a specific product or application.
Explanation of issue: This page does not discuss bioplastic polymers suited for injection molding, and how processing considerations differ for these materials.
References supporting change: https://www.greendotbioplastics.com/terratek-flex-as-an-impact-modifier-for-pla/
76wikibananas (talk) 20:51, 26 November 2018 (UTC)
Reply 26-NOV-2018
edit Unable to review edit request
Your edit request could not be reviewed because the request is not formatted correctly.
- The citation style predominantly used by the Injection moulding article appears to be Citation Style 1. The citation style used in the edit request consists of bare URL's.[a] Any requested edit of yours which may be implemented will need to resemble the current style already in use in the article – in this case, CS1. (See WP:CITEVAR.)
- Citation ref tags have not been placed within the requested text indicating which portions of the text the source is referencing. (See WP:INTEGRITY.)
In the collapsed section below titled Request edit examples, I have illustrated two: The first shows how the edit request was submitted; the second shows how requests should be submitted in the future.
Request edit examples
|
---|
In the example above there are three URL's provided with the claim statements, but these URL's have not been placed using Citation Style 1, which is the style predominantly used by the Injection moulding article. Additionally, the ref tags have not been placed within the text at the exact positions where the information they reference resides. Using the correct style and the correct positioning of the ref tags, the WikiFormatted text would resemble the following:
In the example above the references have been formatted according to Citation Style 1, which shows the author, the source's name, date, etc. Also, the ref tags are placed in the exact location where the text which they reference resides. As Wikipedia is a volunteer project, edit requests such yours are generally expected to have this formatting done before the request is submitted for review. |
Kindly rewrite your edit request so that it aligns more with the second example shown in the collapsed section above, and feel free to re-submit that edit request at your earliest convenience. If you have any questions about this formatting please don't hesitate to ask myself or another editor. Regards, Spintendo 22:16, 26 November 2018 (UTC)
Notes
- ^ The use of bare URLs as references is a style which is acceptable for use in Wikipedia. However, general practice dictates that the style already in use for an article be the one that is subsequently used for all future additions unless changed by editorial consensus. (See WP:CITEVAR.)
Some proposed changes
editThe following Wikipedia contributor may be personally or professionally connected to the subject of this article. Relevant policies and guidelines may include conflict of interest, autobiography, and neutral point of view.
|
This edit request by an editor with a conflict of interest was declined. |
Information to be added or removed: Please add the below section to the end of the "Examples of polymers best suited for the process" using this report as a reference.
Explanation of issue: This page does not discuss bioplastic polymers suited for injection molding, and how processing considerations differ for these materials.
There are also a wide range of bioplastic materials suitable for injection molding. Bioplastics are those plastics which come from biomass at the beginning of their life (i.e., bio-based plastics and biocomposites), those which biodegrade into biomass at the end of their life (i.e., biodegradable plastics), or both (i.e., biodegradable and bio-based)[1]. Bio-based plastics commonly used for injection molding include bio-based PET, starch-plastic composites and wood-plastic composites. Biodegradable polymers suited for injection molding include PBAT and PCL. PLA and PHA are examples of injection molding grade polymers which are both bio-based and biodegradable.
As with conventional plastics, bioplastics polymers can be alloyed and blended to achieve a wide array of physical properties, from enhanced tensile strength, flexural modulus or impact strength. PLA, for example, is generally thought of as a brittle material. A study revealed that PLA can be compounded with biodegradable thermoplastic elastomeric materials to modify the physical properties of PLA without compromising its compostability. At a ratio of 70% PLA and 30% biodegradable thermoplastic elastomer, the percent elongation increased 18.7%. At the same ratio, the impact strength of PLA increased more than 400%[2]. In this way, bioplastic material manufacturers often customize blends and alloys of common polymers to achieve the required performance characteristics of a specific product or application.
76wikibananas (talk) 16:47, 11 December 2018 (UTC)
References
- ^ Frequently asked questions on bioplastics (PDF) (Report). European Bioplastics. 2017.
- ^ "Green Dot Bioplastics finds that Terratek® Flex provides a significant increase in impact strength and elongation without compromising the compostability of PLA". Green Dot Bioplastics.
Reply 11-DEC-2018
edit- The COI editor has not provided reliable, secondary sources which confirm the information requested to be added.
- The COI editor has not made the required disclosures regarding their particular conflict of interest.[a]
Regards, Spintendo 17:38, 11 December 2018 (UTC)
Notes
- ^ By attaching a blank connected contributor template to the request, the COI editor has abrogated their responsibility to provide this information.
Consistency across articles
editI am not pushing for mold or mould to be used in this article, however I think there should be parity in spelling with the Injection molding machine article, which is written in american English, whether by changing this article or the Injection molding machine article Explodingtnt30 (talk) 17:47, 9 February 2024 (UTC)
Start a discussion about improving the Injection moulding page
Talk pages are where people discuss how to make content on Wikipedia the best that it can be. You can use this page to start a discussion with others about how to improve the "Injection moulding" page.