Talk:Data Terminal Ready
 | This article was nominated for deletion on 20 November 2009 (UTC). The result of the discussion was no consensus. |
 | This article is rated Start-class on Wikipedia's content assessment scale. It is of interest to the following WikiProjects: | |||||||||||||||||||||||
| ||||||||||||||||||||||||
The system doesn't work
editShould have been deleted. --Wtshymanski (talk) 17:00, 28 November 2009 (UTC)
- I agree. If I'd seen the AFD I'd have said "strong delete". Jeh (talk) 09:14, 24 June 2010 (UTC)
External links modified
editHello fellow Wikipedians,
I have just modified one external link on Data Terminal Ready. Please take a moment to review my edit. If you have any questions, or need the bot to ignore the links, or the page altogether, please visit this simple FaQ for additional information. I made the following changes:
- Added archive https://web.archive.org/web/20070125091854/http://www.alphamicro.net:80/resources/GPRS_functional_overview.pdf to http://www.alphamicro.net/resources/GPRS_functional_overview.pdf
When you have finished reviewing my changes, please set the checked parameter below to true or failed to let others know (documentation at {{Sourcecheck}}).
This message was posted before February 2018. After February 2018, "External links modified" talk page sections are no longer generated or monitored by InternetArchiveBot. No special action is required regarding these talk page notices, other than regular verification using the archive tool instructions below. Editors have permission to delete these "External links modified" talk page sections if they want to de-clutter talk pages, but see the RfC before doing mass systematic removals. This message is updated dynamically through the template {{source check}} (last update: 5 June 2024).
- If you have discovered URLs which were erroneously considered dead by the bot, you can report them with this tool.
- If you found an error with any archives or the URLs themselves, you can fix them with this tool.
Cheers.—InternetArchiveBot (Report bug) 07:48, 7 December 2016 (UTC)
Incorrect Interpretation and Reference to RS232 Standard
editThe statement "According to the RS232 standard" is incorrect and the document referenced in citation #1 is not actually the RS232 standard. I actually have a genuine paper copy of EIA RS-232-C and, regarding DTR, it states (direct quote):
Circuit CD - Data Terminal Ready (C.C.I.T.T. 108.2)
Direction: To data communication equipment
Signals on this circuit are used to control switching of the data communication equipment to the communication channel. The ON condition prepares the data communication equipment to be connected to the communication channel and maintains the connection established by external means (e.g., manual call origination, manual answering or automatic call origination).
When the station is equipped for automatic answering or received calls and is in the automatic answering mode, connection to the line occurs only in response to a combination of a ringing signal and the ON condition of Circuit CD (Data Terminal Ready): however, the data terminal equipment is normally permitted to present the ON condition on Circuit CD whenever it is ready to transmit or receive data, except as Indicated below.
The OFF condition causes the data communication equipment to be removed from the communication channel following the completion of any "In process" transmission. See Circuit BA (Transmitted Data). The OFF condition shall not disable the operation of Circuit CE (Ring Indicator).
In switched network applications, when circuit CD is turned OFF, it shall not be turned ON until Circuit CC (Data Set Ready) is turned OFF by the data communication equipment
The meaning of "communication channel" or "In process transmission" are subject to interpretation. The V.250 standard referenced in the citation describes just one particular application of the RS-232-C standard, not every application.