Rolladen-Schneider LS2

The Rolladen-Schneider LS2 is a 15-metre span single seat glider prototype with trailing-edge flaps, designed and built by Rolladen-Schneider Flugzeugbau GmbH c. 1973.

LS2
General information
TypeStandard-class sailplane
National originGermany
ManufacturerRolladen-Schneider
Number built1
History
First flight1973

The LS2 was designed by Wolf Lemke and Walter Schneider in response to changes in the Standard Class rules. Only one example was built.

First flown in 1973, it won the German Championships that year. Helmut Reichmann competing in the LS2 won the 14th World championships in Waikerie, Australia in 1974.

Design

edit

The design was nevertheless unsatisfactory. The flaps occupied most of the trailing edge of the wing, being intended both as a means to control speed and improve climb rates in narrow thermals. Class rules did not allow these surfaces to be coupled to the ailerons. The resultant sluggish roll rate from the very short ailerons led to poor and unsafe flying characteristics. Thrice World Champion Helmut Reichmann reportedly said the performance advantages were not worth the extra pilot workload.

The LS2 highlighted inconsistencies in the rules that promoted unwise design trends, with trade-offs having to be made by designers between competitiveness and safety. Many observers also felt that trailing-edge flaps were against the spirit of the Standard Class, an issue that affected other types such as the PIK-20, Libelle and Schreder HP-8.

The International Gliding Commission voted a new set of rules in 1974, prohibiting any lift-enhancing devices in the Standard Class and creating the 15 metre Class where these were allowed without any restriction.

Specifications

edit

General characteristics

  • Crew: One
  • Length: 6.80 m (22 ft 4 in)
  • Wingspan: 15.00 m (49 ft 3 in)
  • Wing area: 10.3 m2 (111 sq ft)
  • Empty weight: 240 kg (530 lb)
  • Gross weight: 360 kg (790 lb)

Performance

  • Maximum glide ratio: 40
  • Rate of sink: 0.65 m/s (128 ft/min)

See also

edit

Related lists

References

edit