Masson Mill

Masson Mill
	Masson Mill in 2006
	Location in Derbyshire
Cotton
Spinning mill (water frame)
Structural system	Brick on gritstone
Location	Matlock Bath, Derbyshire, England
Owner	Arkwright
Further ownership	English Sewing Cotton Company (1897);
Current tenants	Museum and retail village
Coordinates	53°06′46″N 1°33′42″W / 53.1128°N 1.5616°W
Construction
Built	1783; 241 years ago
Renovated	1:1800 raised to 6 floors; 2:1835; 3:1900 chimney and engine house;
Floor count	5, of 21 bays
Floor area	43.8 metres (144 ft) long and 8.4 metres (28 ft) wide
Design team
Awards and prizes and listings	World Heritage Site
Water Power
Wheels	Wren and Bennet in 1847; turbines in 1928;

Sir Richard Arkwright's Masson Mill is a water-powered cotton spinning mill situated on the west bank of the River Derwent in Matlock Bath, Derbyshire in England. This mill was built in 1783. It forms part of the Derwent Valley Mills, a World Heritage Site. Nearby is Willersley Castle, the house Richard Arkwright built for himself within the parish of Matlock.

History

Following the invention of the flying shuttle for weaving cotton in 1733 the demand for spun cotton increased enormously in England. Machines for carding and spinning had already been developed but were inefficient and the cotton produced was of insufficient quality to form the warp of the weave. In 1769, Arkwright patented a water frame to use the extra power of a water mill. His first mill was the Cromford Mill in 1771. Masson Mill is the third, and was built close by to take advantage of the greater water flow from the River Derwent.

Constructed in brick on a gritstone with stone quoins and window dressings, the original 21 bay 5 storey building was 43.8 metres long and 8.4 metres wide. The staircase and ancillary services were in a central projection leaving production floors uncluttered, This was an important advance in mill architecture. The mill was powered by a single waterwheel which, by 1801, had been replaced by two, a system which continued (with replacement wheels by Wren and Bennet in 1847) until turbines were installed in 1928. In its original form, the mill was built with a high parapet which concealed a low pitch roof but probably at the same time as the second wheel was added c. 1800, the roof was raised, as a result of which the mill acquired a usable sixth storey.^[1]

A weir was built across the Derwent to build up a head for Arkwright's Mill and a pre-existing paper mill. It is unusual in that it is convex in form, rather than the usual concave.

Adams, in his "Gem of the Peak"' (1840) said that Masson Mill 'is replete with the improved machinery employed in making cotton thread'. He also described the night time view as 'exceedingly imposing. The spacious mill, with its hundred lights reflecting on the river and the thick foliage, mingling the din of wheels with the noise of the waterfall'.^[2]

Buildings were added to the north and west of the mill by c.1835, some of which were subsequently demolished. In 1911, 1928, and more recently in 1998, extensions were added in Accrington brick. The mill chimney dates from 1900, and this and the engine house were the work of Stott and Sons, the famous mill architects.^[1]

In 1897 Masson Mill became part of the English Sewing Cotton Company. Kelly's (1908) Directory stated that 'the Masson Cotton Mills... give employment to many of the inhabitants' [of Matlock Bath]. By 1922 the Masson Cotton Mills were 'now the property of Sir Richard Arkwright and Co. Limited (branch of the English Sewing Cotton Co. Limited)' and the mill continued to be a major employer in the area. The mill has been extensively repaired and restored recently. The mill is now home to a museum, and formerly, a retail village, but this did not reopen following the COVID-19 pandemic.^[3]^[4]