The Korg Poly-61 (PS-61) is an analog synthesizer manufactured by Korg between 1982 and 1986. It was the first affordable synthesizer to feature two oscillators per voice, and was Korg's first synthesizer to feature digitally-controlled analog oscillators (DCOs). The Poly-61 marked a significant departure in design philosophy from previous Korg synthesizers by replacing the traditional array of dedicated control knobs on the front panel with a digital interface that required users to select parameters individually for adjustment.[1][2]

Poly-61
Poly-61
ManufacturerKorg (Keio Electronic Laboratories)
Dates1982-1986
Technical specifications
Polyphony6 voices
TimbralityMonotimbral
Oscillator2 DCOs per voice
LFO1/2
Synthesis typeAnalog Subtractive
Filter1 low-pass per voice
Attenuator1 VCA per voice
1 ADSR envelope per voice
Storage memory64 patches
Input/output
Keyboard61 keys
External controlPoly-61M has MIDI

In 1984, an updated version, the Poly-61M, was released to incorporate support for the newly established Musical Instrument Digital Interface (MIDI) standard.[2]

Background

edit

The Poly-61 was launched as a successor to the Polysix and was developed in response to the competitive market of affordable polysynths dominated by Roland with its Juno-6.[3] The Poly-61 distinguished itself by offering 64 programmable memories, surpassing the Juno-6, which had no memory storage. It also featured two banks of oscillators, allowing for interval and detuning effects, an enhancement over the Juno’s single oscillator bank. Despite Roland’s subsequent release of the Juno-60, which included 56 memory locations, it still only featured a single oscillator bank.[4]

Sounds and features

edit
 
The Poly-61's digital control interface.

The Poly-61 features two digitally controlled analog oscillators (DCOs) per voice. DCO1 delivers sawtooth, square, and pulse-width modulation (PWM) waveforms. DCO2 generates sawtooth and square waveforms and can be slightly detuned from DCO1, or by specific musical intervals such as a third, fourth, minor third, or fifth. The voltage-controlled filter (VCF) includes standard controls for cutoff frequency, resonance, keyboard tracking, and envelope modulation. The settings are limited, offering a simple on/off for keyboard tracking and just eight options for resonance and envelope intensity.[1]

The audio signal path passes through a voltage-controlled amplifier (VCA), which can controlled via an ADSR envelope generator or an external CV/gate pulse. The synthesizer's low-frequency oscillator (LFO) produces a triangle wave, featuring a variable delay, and can modulate both the DCOs and the VCF.[1] A modulation joystick allows for pitch bending when moved from left to right and vibrato from an additional independent LFO when moved back and forth.[4] The Poly-61 was among the first Korg products to feature a joystick.[5]

The Poly-61 also features an arpeggiator; a chord memory function capable of capturing up to six notes, enabling them to be played back from a single key with accurate transposition; and a hold switch to sustain notes after the keys have been released. It can be set to monophonic mode by using the poly and hold switches together, which allows for all 12 oscillators to play a single note.[1][6]

Reception

edit

The Poly-61 was not as well received as the Polysix, with criticism levelled to its push-button programming interface, the perceived lack of warmth from its digitally-controlled oscillators (DCOs) compared to the Polysix's voltage-controlled oscillators (VCOs), and the coarsely quantised resolution of the digital programming system.[3][7] The Poly-61 also lacked the on-board effects of the Polysix.

The Poly-61 was released just before the introduction of MIDI, and still used old style analog voltage trigger outputs to interface it with sequencers and drum machines (although this was addressed by the later addition of MIDI in the Poly-61M). However, it would be the release of the all-digital Yamaha DX7 just a few months after the Poly-61 that would quickly erode its market appeal. The Poly-61 was replaced in 1985 by the DW-8000 which still used a partially analog architecture. It was not until the revolutionary Korg M1 six years later, that Korg returned to the top of the class with the first sample-based digital workstation synth.

References

edit
  1. ^ a b c d "Korg Poly 61". One Two Testing. United Kingdom: IPC Magazines Ltd, Northern & Shell Ltd. Dec 1982. p. 77. Retrieved 2024-03-15.
  2. ^ a b Bjørn, Kim (2022-01-01). Patch & Tweak with KORG. Bjooks. p. 198. ISBN 978-8799999552.
  3. ^ a b Reid, Gordon (October 2002). "The History Of Korg: Part 1". Sound On Sound. Retrieved 2024-03-15.
  4. ^ a b "The Year, In Gear". One Two Testing. United Kingdom: IPC Magazines Ltd, Northern & Shell Ltd. Jan 1984. pp. 67–89. Retrieved 2024-04-27.
  5. ^ "Video: A Timeline of Korg Polysynths". Reverb. 2022-07-13. Retrieved 2024-04-27.
  6. ^ Beecher, Mike (Mar 1983). "Korg Poly 61". Electronics & Music Maker. United Kingdom: Music Maker Publications (UK), Future Publishing. pp. 62–64. Retrieved 2024-04-27.
  7. ^ Jenkins, Mark (Dec 1983). "Polyphonic Synthesizers". Electronic Soundmaker & Computer Music. United Kingdom: Cover Publications Ltd, Northern & Shell Ltd. pp. 32–37. Retrieved 2024-04-27.