K-factor (fire protection)

In fire protection engineering, the K-factor formula is used to calculate the volumetric flow rate from a nozzle. Spray nozzles can for example be fire sprinklers or water mist nozzles, hose reel nozzles, water monitors and deluge fire system nozzles.

Calculation

edit

K-factors are usually calculated in metric units internationally.

Metric units

edit

Using metric units, the volumetric flow rate of a nozzle is given by  ,[1][2] where q is the flow rate in litres per minute ( l/min ), p is the pressure at the nozzle in bar and K is the K-factor is given in units of  .

US customary units

edit

K-Factors have also previously been calculated and published using the United States customary units of pound per square inch (psi) and gallon per minute (gpm). Within the United States, US measurements are still often used instead of metric.[3][4]

Unit confusion

edit

Care should be exercised not to intermix K-factors from metric and Imperial/US units, as the resulting factors are not equivalent or interchangeable.[5] In case of mix-ups, results can be catastrophic[broken anchor].

References

edit
  1. ^ "K-Factor formula". Canute LLP. 18 Jan 2009. Retrieved 2009-01-18.
  2. ^ "How can I use sprinkler K factor information in Pipe Flow Expert?". PipeFlow. n.d. Retrieved 2019-06-06.
  3. ^ Engineermate; example of page using US K-factor for fire protection
  4. ^ Building codes; example of page using US K-factor for fire protection
  5. ^ Sprinkler manufacturer who lists both types of K-factors. Archived 2015-03-07 at the Wayback Machine