Wikipedia

Indian locomotive class WAG-3

The Indian locomotive class WAG-3 was a class of 25 kV AC electric locomotives that was imported from Europe in the mid 1960s for Indian Railways. The model name stands for broad gauge (W), AC Current (A), Goods traffic (G) engine, 3rd (3). A total of 10 WAG-3 locomotives were built by The European Group 50 Hz Group/European Group/50 Cycles Group (consortium) in 1965, and entering service in the same year.[1]

Indian locomotive class WAG-3
Type and origin
Power typeElectric
BuilderKraus-Maffei, Krupp, SFAC, La Brugeoise & Nivelle (50 cycles European group)
Build date1965
Total produced10
Specifications
Configuration:
​
 • AARB-B
 • UICB-B
Gauge5 ft 6 in (1,676 mm)
BogiesMonomotor B-B bogies
Wheel diameterNew: 1,140 mm (3 ft 9 in)
Half worn: 1,120 mm (3 ft 8 in)
Full worn: 1,064 mm (3 ft 6 in)
Length14.600 m (47 ft 10+13⁄16 in)
Width3.109 m (10 ft 2+13⁄32 in)
Height4.165 m (13 ft 7+31⁄32 in)
Axle load18,640 kg (41,090 lb)
Loco weight74,000 kg (163,000 lb)
Electric system/s25 kV 50 Hz AC AC Overhead
Current pickup(s)Pantograph
Traction motorsAGEC make, type 1580 A1 (1270V, 1040A, 680 rpm. Weight 5850kg.) Bogie mounted.
Loco brakeAir
Train brakesVacuum
Performance figures
Maximum speed112 km/h (70 mph)
Power outputMax: 2,930 hp (2,185 kW)
Continuous: 2,930 hp (2,185 kW)
Tractive effortStarting: 25,000 kgf (250 kN; 55,000 lbf)
Career
OperatorsIndian Railways
Numbers20869–20878
LocaleAll over India
DispositionRetired

The WAG-3 served mainly freight trains for over 35 years. As of January 2020, all locomotives of this class have been withdrawn from service and scrapped.

History

edit

Ten locomotives of this type were ordered from European Group. All these locomotives have been assembled in Europe. The first locomotive was put in service in July 1965. The typical feature of these locomotives was a Monomotor bogie. This construction resulted in substantial saving in weight in traction equipment and gives better adhesion. These locomotives utilize silicon rectifiers for conversion of AC power into DC. The traction motors were force ventilated and are fully suspended type. These motors are permanently grouped in parallel and controlled by tap changer and field weakening. The traction motors for the WAG-3 were two units of Alstom MG1580A1 which output 23% more top power than the WAG-1. This can be used for a multiple unit operation to a maximum of four locomotives. Compressed air brake for the loco and vacuum brake for the train are provided. In addition, these locomotives have been provided with rheostatic braking. The WAG-4 is based on this class.

Specification

edit
  • Build dates: 1963-66
  • Wheel arrangement: B-B ( monomotor bogies )
  • Traction motors:AGEC make, type 1580 A1 (1270V, 1040A, 680 rpm. Weight 5850 kg.) Bogie mounted.
  • Gear ratio: 3.95:1
  • Transformer: Oerlikon BOT 3460. 32 taps.
  • Rectifiers: Two GL 82220 silicon rectifiers, 1000A/1270 kW/1270V. Weight 650 kg each.
  • Axle load: 21.3 t
  • Max. Haulage: 1820 t
  • Pantographs: Two Faiveley AM-12

Locomotive shed

edit
  • All locomotives of this class have been withdrawn from service.

See also

edit


References

edit
  1. ^ "[IRFCA] Indian Railways FAQ: Diesel and Electric Locomotive Specifications".
edit
Retrieved from "https://en.wiki.x.io/w/index.php?title=Indian_locomotive_class_WAG-3&oldid=1259958023"