High Flux Australian Reactor

The High Flux Australian Reactor (HIFAR) was Australia's first nuclear research reactor. It was built at the Australian Atomic Energy Commission (AAEC) research establishment at Lucas Heights, Sydney, New South Wales. The reactor was in operation between 1958 and 2007, when it was decommissioned and replaced with the multi-purpose Open-pool Australian lightwater reactor (OPAL), also in Lucas Heights. Both HIFAR and its successor OPAL have been known simply as the Lucas Heights reactor.

High Flux Australian Reactor
HIFAR at Lucas Heights, 1958
Reactor conceptHeavy-water
Status
  • Commissioned, 1958
  • Decommissioned, 2007
LocationLucas Heights, Sydney
Coordinates34°03′06″S 150°58′50″E / 34.05167°S 150.98056°E / -34.05167; 150.98056
Main parameters of the reactor core
Fuel (fissile material)235U
Fuel stateSolid
Neutron energy spectrumThermal
Primary moderatorHeavy water
Primary coolantLiquid (heavy water, D2O)
Reactor usage
Primary useNeutron diffraction; Radioisotope production
Power (thermal)10MWthermal
Websitewww.ansto.gov.au

Background and operation

edit

Based on the DIDO reactor at Harwell in the UK, HIFAR was cooled and moderated by heavy water (D2O), and the fuel was enriched uranium. There was also a graphite neutron reflector surrounding the core. Like DIDO, its original purpose was nuclear materials testing, using its high neutron flux to give materials intended for use in nuclear power reactors their entire expected lifetime neutron exposure in a relatively short period.

HIFAR was used for research, particularly neutron diffraction experiments,[1] production of neutron transmutation doped (NTD) silicon, and for production of medical and industrial radioisotopes.

HIFAR went critical at 11:15 pm local time on 26 January 1958,[2] and was first run at full power of 10 MW (thermal) in 1960. The initial fuel was highly enriched uranium, but over the years the enrichment level of new fuel was steadily reduced, in line with international trends designed to reduce the danger of diversion of research reactor fuel for weapons programs. HIFAR completed conversion to low enriched uranium fuel (LEU) in 2006. Of the six DIDO class reactors built including DIDO itself, HIFAR was the last to cease operation. Permanent decommissioning of HIFAR commenced on 30 January 2007[3] and was expected to be completed by 2025.[4]

In the second half of 2023, a licence application for HIFAR Phase A decommissioning was considered by ARPANSA. Phase A decommissioning means decommissioning of the peripheral plant and equipment associated with the reactor. The Phase B decommissioning, licence to which is to be considered at a later time, means demolition of the reactor containment structure and reactor building, rendering the reactor site a green-field site. The full Phase B decommissioning was expected to be completed by about year 2030.[5]

On 12 August 2006 Open-pool Australian lightwater reactor (OPAL), the 20 MW replacement reactor located on an adjacent site, went critical.[6] OPAL is served by the same complex of research, isotope production and remote handling laboratories. The two reactors ran in parallel for six months while OPAL was being tested. HIFAR was then permanently shut down and OPAL took over HIFAR's role of Australia's only operating nuclear reactor.[2]

Engineering heritage award

edit

The reactor is listed as a National Engineering Landmark by Engineers Australia as part of its Engineering Heritage Recognition Program.[7]

See also

edit

References

edit
  1. ^ Elcombe, Margaret (19 April 2017). "Neutron Scattering at HIFAR — Glimpses of the Past". Quantum Beam Science. 1 (1): 5. Bibcode:2017QBS.....1....5E. doi:10.3390/qubs1010005.
  2. ^ a b "HIFAR Media Backgrounder" (PDF) (Press release). Australian Nuclear Science and Technology Organisation. 30 January 2007. Retrieved 30 January 2007.
  3. ^ "Science Minister turns off nuclear reactor". Australian Broadcasting Corporation. 30 January 2007. Retrieved 30 January 2007.
  4. ^ "Australia's first reactor". Australian Nuclear Science and Technology Organisation. Archived from the original on 5 May 2013. Retrieved 20 January 2016.
  5. ^ https://consult.arpansa.gov.au/hub/hifar-phase-a-decommissioning/
  6. ^ "Development of OPAL". Australian Nuclear Science and Technology Organisation. Archived from the original on 16 May 2013. Retrieved 20 January 2016.
  7. ^ "High Flux Australian Reactor, 1958-". Engineers Australia. Retrieved 29 April 2020.

Further reading

edit
edit