Euclidean plane isometry

In geometry, a Euclidean plane isometry is an isometry of the Euclidean plane, or more informally, a way of transforming the plane that preserves geometrical properties such as length. There are four types: translations, rotations, reflections, and glide reflections (see below § Classification).

The set of Euclidean plane isometries forms a group under composition: the Euclidean group in two dimensions. It is generated by reflections in lines, and every element of the Euclidean group is the composite of at most three distinct reflections.

Informal discussion

Informally, a Euclidean plane isometry is any way of transforming the plane without "deforming" it. For example, suppose that the Euclidean plane is represented by a sheet of transparent plastic sitting on a desk. Examples of isometries include:

Shifting the sheet one inch to the right.
Rotating the sheet by ten degrees around some marked point (which remains motionless).
Turning the sheet over to look at it from behind. Notice that if a picture is drawn on one side of the sheet, then after turning the sheet over, we see the mirror image of the picture.

These are examples of translations, rotations, and reflections respectively. There is one further type of isometry, called a glide reflection (see below under classification of Euclidean plane isometries).

However, folding, cutting, or melting the sheet are not considered isometries. Neither are less drastic alterations like bending, stretching, or twisting.

Formal definition

An isometry of the Euclidean plane is a distance-preserving transformation of the plane. That is, it is a map

$M:{\textbf {R}}^{2}\to {\textbf {R}}^{2}$

such that for any points p and q in the plane,

$d(p,q)=d(M(p),M(q)),$

where d(p, q) is the usual Euclidean distance between p and q.

Classification

It can be shown that there are four types of Euclidean plane isometries. (Note: the notations for the types of isometries listed below are not completely standardised.)

Reflections

Reflection

Reflections, or mirror isometries, denoted by F_c,v, where c is a point in the plane and v is a unit vector in R². (F is for "flip".) have the effect of reflecting the point p in the line L that is perpendicular to v and that passes through c. The line L is called the reflection axis or the associated mirror. To find a formula for F_c,v, we first use the dot product to find the component t of p − c in the v direction,

$t=(p-c)\cdot v=(p_{x}-c_{x})v_{x}+(p_{y}-c_{y})v_{y},$

and then we obtain the reflection of p by subtraction,

$F_{c,v}(p)=p-2tv.$

The combination of rotations about the origin and reflections about a line through the origin is obtained with all orthogonal matrices (i.e. with determinant 1 and −1) forming orthogonal group O(2). In the case of a determinant of −1 we have:

$R_{0,\theta }(p)={\begin{bmatrix}\cos \theta &\sin \theta \\\sin \theta &\mathbf {-} \cos \theta \end{bmatrix}}{\begin{bmatrix}p_{x}\\p_{y}\end{bmatrix}}.$ which is a reflection in the x-axis followed by a rotation by an angle θ, or equivalently, a reflection in a line making an angle of θ/2 with the x-axis. Reflection in a parallel line corresponds to adding a vector perpendicular to it.

Translations

Translation

Translations, denoted by T_v, where v is a vector in R² have the effect of shifting the plane in the direction of v. That is, for any point p in the plane,

$T_{v}(p)=p+v,$

or in terms of (x, y) coordinates,

$T_{v}(p)={\begin{bmatrix}p_{x}+v_{x}\\p_{y}+v_{y}\end{bmatrix}}.$

A translation can be seen as a composite of two parallel reflections.

Rotations

Rotation

Rotations, denoted by R_c,θ, where c is a point in the plane (the centre of rotation), and θ is the angle of rotation. In terms of coordinates, rotations are most easily expressed by breaking them up into two operations. First, a rotation around the origin is given by

$R_{0,\theta }(p)={\begin{bmatrix}\cos \theta &-\sin \theta \\\sin \theta &\cos \theta \end{bmatrix}}{\begin{bmatrix}p_{x}\\p_{y}\end{bmatrix}}.$

These matrices are the orthogonal matrices (i.e. each is a square matrix G whose transpose is its inverse, i.e. $GG^{T}=G^{T}G=I_{2}.$ ), with determinant 1 (the other possibility for orthogonal matrices is −1, which gives a mirror image, see below). They form the special orthogonal group SO(2).

A rotation around c can be accomplished by first translating c to the origin, then performing the rotation around the origin, and finally translating the origin back to c. That is,

$R_{c,\theta }=T_{c}\circ R_{0,\theta }\circ T_{-c},$

or in other words,

$R_{c,\theta }(p)=c+R_{0,\theta }(p-c).$

Alternatively, a rotation around the origin is performed, followed by a translation:

$R_{c,\theta }(p)=c-R_{0,\theta }c+R_{0,\theta }(p).$

A rotation can be seen as a composite of two non-parallel reflections.

Rigid transformations

The set of translations and rotations together form the rigid motions or rigid displacements. This set forms a group under composition, the group of rigid motions, a subgroup of the full group of Euclidean isometries.

Glide reflections

Glide reflection

Glide reflections, denoted by G_c,v,w, where c is a point in the plane, v is a unit vector in R², and w is non-null a vector perpendicular to v are a combination of a reflection in the line described by c and v, followed by a translation along w. That is,

$G_{c,v,w}=T_{w}\circ F_{c,v},$

or in other words,

$G_{c,v,w}(p)=w+F_{c,v}(p).$

(It is also true that

$G_{c,v,w}(p)=F_{c,v}(p+w);$

that is, we obtain the same result if we do the translation and the reflection in the opposite order.)

Alternatively we multiply by an orthogonal matrix with determinant −1 (corresponding to a reflection in a line through the origin), followed by a translation. This is a glide reflection, except in the special case that the translation is perpendicular to the line of reflection, in which case the combination is itself just a reflection in a parallel line.

The identity isometry, defined by I(p) = p for all points p is a special case of a translation, and also a special case of a rotation. It is the only isometry which belongs to more than one of the types described above.

In all cases we multiply the position vector by an orthogonal matrix and add a vector; if the determinant is 1 we have a rotation, a translation, or the identity, and if it is −1 we have a glide reflection or a reflection.

A "random" isometry, like taking a sheet of paper from a table and randomly laying it back, "almost surely" is a rotation or a glide reflection (they have three degrees of freedom). This applies regardless of the details of the probability distribution, as long as θ and the direction of the added vector are independent and uniformly distributed and the length of the added vector has a continuous distribution. A pure translation and a pure reflection are special cases with only two degrees of freedom, while the identity is even more special, with no degrees of freedom.

Isometries as reflection group

Reflections, or mirror isometries, can be combined to produce any isometry. Thus isometries are an example of a reflection group.

Mirror combinations

In the Euclidean plane, we have the following possibilities.

Isometries as mirrors

[d ] Identity

Two reflections in the same mirror restore each point to its original position. All points are left fixed. Any pair of identical mirrors has the same effect.

[db] Reflection

As Alice found through the looking-glass, a single mirror causes left and right hands to switch. (In formal terms, topological orientation is reversed.) Points on the mirror are left fixed. Each mirror has a unique effect.

[dp] Rotation

Two distinct intersecting mirrors have a single point in common, which remains fixed. All other points rotate around it by twice the angle between the mirrors. Any two mirrors with the same fixed point and same angle give the same rotation, so long as they are used in the correct order.

[dd] Translation

Two distinct mirrors that do not intersect must be parallel. Every point moves the same amount, twice the distance between the mirrors, and in the same direction. No points are left fixed. Any two mirrors with the same parallel direction and the same distance apart give the same translation, so long as they are used in the correct order.

[dq] Glide reflection

Three mirrors. If they are all parallel, the effect is the same as a single mirror (slide a pair to cancel the third). Otherwise we can find an equivalent arrangement where two are parallel and the third is perpendicular to them. The effect is a reflection combined with a translation parallel to the mirror. No points are left fixed.

Three mirrors suffice

Adding more mirrors does not add more possibilities (in the plane), because they can always be rearranged to cause cancellation.

Proof

An isometry is completely determined by its effect on three independent (not collinear) points. So suppose p₁, p₂, p₃ map to q₁, q₂, q₃; we can generate a sequence of mirrors to achieve this as follows. If p₁ and q₁ are distinct, choose their perpendicular bisector as mirror. Now p₁ maps to q₁; and we will pass all further mirrors through q₁, leaving it fixed. Call the images of p₂ and p₃ under this reflection p₂′ and p₃′. If q₂ is distinct from p₂′, bisect the angle at q₁ with a new mirror. With p₁ and p₂ now in place, p₃ is at p₃″; and if it is not in place, a final mirror through q₁ and q₂ will flip it to q₃. Thus at most three reflections suffice to reproduce any plane isometry. Q.E.D.

Recognition

We can recognize which of these isometries we have according to whether it preserves hands or swaps them, and whether it has at least one fixed point or not, as shown in the following table (omitting the identity).

		Preserves hands?
		Yes	No
Fixed point?	Yes	Rotation	Reflection
Fixed point?	No	Translation	Glide reflection

Group structure

Isometries requiring an odd number of mirrors — reflection and glide reflection — always reverse left and right. The even isometries — identity, rotation, and translation — never do; they correspond to rigid motions, and form a normal subgroup of the full Euclidean group of isometries. Neither the full group nor the even subgroup are abelian; for example, reversing the order of composition of two parallel mirrors reverses the direction of the translation they produce.

Proof

The identity is an isometry; nothing changes, so distance cannot change. And if one isometry cannot change distance, neither can two (or three, or more) in succession; thus the composition of two isometries is again an isometry, and the set of isometries is closed under composition. The identity isometry is also an identity for composition, and composition is associative; therefore isometries satisfy the axioms for a semigroup. For a group, we must also have an inverse for every element. To cancel a reflection, we merely compose it with itself (Reflections are involutions). And since every isometry can be expressed as a sequence of reflections, its inverse can be expressed as that sequence reversed. Notice that the cancellation of a pair of identical reflections reduces the number of reflections by an even number, preserving the parity of the sequence; also notice that the identity has even parity. Therefore all isometries form a group, and even isometries a subgroup. (Odd isometries do not include the identity, so are not a subgroup). This subgroup is a normal subgroup, because sandwiching an even isometry between two odd ones yields an even isometry. Q.E.D.

Since the even subgroup is normal, it is the kernel of a homomorphism to a quotient group, where the quotient is isomorphic to a group consisting of a reflection and the identity. However the full group is not a direct product, but only a semidirect product, of the even subgroup and the quotient group.

Composition

Composition of isometries mixes kinds in assorted ways. We can think of the identity as either two mirrors or none; either way, it has no effect in composition. And two reflections give either a translation or a rotation, or the identity (which is both, in a trivial way). Reflection composed with either of these could cancel down to a single reflection; otherwise it gives the only available three-mirror isometry, a glide reflection. A pair of translations always reduces to a single translation; so the challenging cases involve rotations. We know a rotation composed with either a rotation or a translation must produce an even isometry. Composition with translation produces another rotation (by the same amount, with shifted fixed point), but composition with rotation can yield either translation or rotation. It is often said that composition of two rotations produces a rotation, and Euler proved a theorem to that effect in 3D; however, this is only true for rotations sharing a fixed point.

Translation, rotation, and orthogonal subgroups

We thus have two new kinds of isometry subgroups: all translations, and rotations sharing a fixed point. Both are subgroups of the even subgroup, within which translations are normal. Because translations are a normal subgroup, we can factor them out leaving the subgroup of isometries with a fixed point, the orthogonal group.

Translation addition with mirrors

Proof

If two rotations share a fixed point, then we can swivel the mirror pair of the second rotation to cancel the inner mirrors of the sequence of four (two and two), leaving just the outer pair. Thus the composition of two rotations with a common fixed point produces a rotation by the sum of the angles about the same fixed point.

If two translations are parallel, we can slide the mirror pair of the second translation to cancel the inner mirror of the sequence of four, much as in the rotation case. Thus the composition of two parallel translations produces a translation by the sum of the distances in the same direction. Now suppose the translations are not parallel, and that the mirror sequence is A₁, A₂ (the first translation) followed by B₁, B₂ (the second). Then A₂ and B₁ must cross, say at c; and, reassociating, we are free to pivot this inner pair around c. If we pivot 90°, an interesting thing happens: now A₁ and A₂′ intersect at a 90° angle, say at p, and so do B₁′ and B₂, say at q. Again reassociating, we pivot the first pair around p to make B₂″ pass through q, and pivot the second pair around q to make A₁″ pass through p. The inner mirrors now coincide and cancel, and the outer mirrors are left parallel. Thus the composition of two non-parallel translations also produces a translation. Also, the three pivot points form a triangle whose edges give the head-to-tail rule of vector addition: $2(p c) + 2(c q) = 2(p q)$ . Q.E.D.

Nested group construction

The subgroup structure suggests another way to compose an arbitrary isometry:

Pick a fixed point, and a mirror through it.

If the isometry is odd, use the mirror; otherwise do not.
If necessary, rotate around the fixed point.
If necessary, translate.

This works because translations are a normal subgroup of the full group of isometries, with quotient the orthogonal group; and rotations about a fixed point are a normal subgroup of the orthogonal group, with quotient a single reflection.

Discrete subgroups

Dihedral group of regular pentagon symmetries

The subgroups discussed so far are not only infinite, they are also continuous (Lie groups). Any subgroup containing at least one non-zero translation must be infinite, but subgroups of the orthogonal group can be finite. For example, the symmetries of a regular pentagon consist of rotations by integer multiples of 72° (360° / 5), along with reflections in the five mirrors which perpendicularly bisect the edges. This is a group, D₅, with 10 elements. It has a subgroup, C₅, of half the size, omitting the reflections. These two groups are members of two families, D_n and C_n, for any n > 1. Together, these families constitute the rosette groups.

Translations do not fold back on themselves, but we can take integer multiples of any finite translation, or sums of multiples of two such independent translations, as a subgroup. These generate the lattice of a periodic tiling of the plane.

We can also combine these two kinds of discrete groups — the discrete rotations and reflections around a fixed point and the discrete translations — to generate the frieze groups and wallpaper groups. Curiously, only a few of the fixed-point groups are found to be compatible with discrete translations. In fact, lattice compatibility imposes such a severe restriction that, up to isomorphism, we have only 7 distinct frieze groups and 17 distinct wallpaper groups. For example, the pentagon symmetries, D₅, are incompatible with a discrete lattice of translations. (Each higher dimension also has only a finite number of such crystallographic groups, but the number grows rapidly; for example, 3D has 230 groups and 4D has 4783.)

Isometries in the complex plane

In terms of complex numbers, the isometries of the plane are either of the form

${\begin{array}{ccc}\mathbb {C} &\longrightarrow &\mathbb {C} \\z&\mapsto &a+\omega z\end{array}}$

or of the form

${\begin{array}{ccc}\mathbb {C} &\longrightarrow &\mathbb {C} \\z&\mapsto &a+\omega {\overline {z}}{\mbox{,}}\end{array}}$

for some complex numbers $a$ and $ω$ with |ω| = 1. This is easy to prove: if $a = f (0)$ and $ω = f (1) - f (0)$ and if one defines

${\begin{array}{rccc}g\colon &\mathbb {C} &\longrightarrow &\mathbb {C} \\&z&\mapsto &{\frac {f(z)-a}{\omega }}{\mbox{,}}\end{array}}$

then $g$ is an isometry, $g (0) = 0$ , and $g (1) = 1$ . It is then easy to see that g is either the identity or the conjugation, and the statement being proved follows from this and from the fact that $f (z) = a + ωg (z)$ .

This is obviously related to the previous classification of plane isometries, since:

functions of the type $z \to a + z$ are translations;
functions of the type $z \to ω z$ are rotations (when |ω| = 1);
the conjugation is a reflection.

Note that a rotation about complex point p is obtained by complex arithmetic with

$z\mapsto \omega (z-p)+p=\omega z+p(1-\omega )$

where the last expression shows the mapping equivalent to rotation at 0 and a translation. Therefore, given direct isometry $z\mapsto \omega z+a,$ one can solve $p(1-\omega )=a$ to obtain $p=a/(1-\omega )$ as the center for an equivalent rotation, provided that $\omega \neq 1$ , that is, provided the direct isometry is not a pure translation. As stated by Cederberg, "A direct isometry is either a rotation or a translation."^[1]

References

^ Cederberg, Judith N. (2001). A Course in Modern Geometries. Springer. pp. 136–164. ISBN 978-0-387-98972-3., quote from page 151

External links

Plane Isometries

[1] Cederberg, Judith N. (2001). A Course in Modern Geometries. Springer. pp. 136–164. ISBN 978-0-387-98972-3., quote from page 151

[1]

Euclidean plane isometry

Contents

Informal discussion

Formal definition

Classification

Reflections

Translations

Rotations

Rigid transformations

Glide reflections

Isometries as reflection group

Mirror combinations

Three mirrors suffice

Recognition

Group structure

Composition

Translation, rotation, and orthogonal subgroups

Nested group construction

Discrete subgroups

Isometries in the complex plane

See also

References

External links