Electromagnetic radio frequency (RF) convergence is a signal-processing paradigm that is utilized when several RF systems have to share a finite amount of resources among each other. RF convergence indicates the ideal operating point for the entire network of RF systems sharing resources such that the systems can efficiently share resources in a manner that's mutually beneficial. With communications spectral congestion recently becoming an increasingly important issue for the telecommunications sector, researchers have begun studying methods of achieving RF convergence for cooperative spectrum sharing between remote sensing systems (such as radar) and communications systems.[1] Consequentially, RF convergence is commonly referred to as the operating point of a remote sensing and communications network at which spectral resources are jointly shared by all nodes (or systems) of the network in a mutually beneficial manner.[2] Remote sensing and communications have conflicting requirements and functionality. Furthermore, spectrum sharing approaches between remote sensing and communications have traditionally been to separate or isolate both systems (temporally, spectrally or spatially).[3] This results in stove pipe designs that lack back compatibility. Future of hybrid RF systems demand co-existence and cooperation between sensibilities with flexible system design and implementation. Hence, achieving RF convergence can be an incredibly complex and difficult problem to solve. Even for a simple network consisting of one remote sensing and communications system each, there are several independent factors in the time, space, and frequency domains that have to be taken into consideration in order to determine the optimal method to share spectral resources.[4] For a given spectrum-space-time resource manifold, a practical network will incorporate numerous remote sensing modalities and communications systems, making the problem of achieving RF convergence intangible.
![](http://up.wiki.x.io/wikipedia/commons/c/cd/RFConvergenceCartoon_goof.png)
Motivation
editSpectral congestion is caused by too many RF communications users concurrently accessing the electromagnetic spectrum. This congestion may degrade communications performance and decrease or even restrict access to spectral resources. Spectrum sharing between radar and communications applications was proposed as a way to alleviate the issues caused by spectral congestion. This has led to a greater emphasis being placed by researchers into investigating methods of radar-communications cooperation and co-design.[1][5] Government agencies such as The Defense Advanced Research Projects Agency (DARPA) and others have begun funding research that investigates methods of coexistence for military radar systems, such that their performance will not be affected when sharing spectrum with communications systems. These agencies are also interested in fundamental research investigating the limits of cooperation between military radar and communications systems that in the long run will lead to better co-design methods that improve performance. However, the problems caused by spectrum sharing do not affect just military systems. There are a wide variety of remote sensing and communications applications that will be adversely affected by sharing spectrum with communications systems such as automotive radars, medical devices, 5G etc. Furthermore, applications like autonomous automobiles and smart home networks can stand to benefit substantially by cooperative remote sensing and communications. Consequently, researchers have started investigating fundamental approaches to joint remote sensing and communications.
Remote sensing and communications fundamentally tend to conflict with one another. Remote sensing typically transmits known information into the environment (or channel) and measures a reflected response, which is then used to extract unknown information about the environment. For example, in the case of a radar system, the known information is the transmitted signal and the unknown information is the target channel that is desired to be estimated. On the other hand, a communications system basically sends unknown information into a known environment. Although a communications system does not know what the environment (also called a propagation channel) is beforehand, every system operates under the assumption that it is either previously estimated or its underlying probability distribution is known. Due to both systems’ conflicting nature, it is clear that when it comes to designing systems that can jointly sense and communicate, the solution is non-trivial. Due to difficulties in jointly sensing and communicating, both systems are often designed to be isolated in time, space, and/or frequency. Often, the only time legacy systems consider the other user in their mode of operation is through regulations, which are defined by agencies such as the FCC (United States), that constrain the other user's functionality.[2] As spectral congestion continues to force both remote sensing and communications system to share spectral resources, achieving RF convergence is the solution to optimally function in an increasingly crowded wireless spectrum.
Applications of joint sensing-communications systems
editSeveral applications can benefit from RF convergence research such as autonomous driving, cloud-based medical devices, light based applications etc. Each application may have different goals, requirements, and regulations which present different challenges to achieving RF convergence.[2] A few examples of joint sensing-communications applications are listed below.
- Intelligent Transport Systems (Vehicle-to-vehicle Communications)[6][7]
- Commercial Flight Control[8]
- Communications & Military Radar[9]
- Remote Medical Monitoring and Wearable Medical Sensors[10][11]
- High Frequency Imaging and Communications[12][13]
- Li-Fi and Lidar[14]
- RFID & Asset Tracking[15]
- Capable Wireless Sensor Networks[7]
Joint sensing-communications system design and integration
editJoint sensing-communications systems can be designed based on four different types of system integration. These different levels range from complete isolation, to complete co-design of systems.[2] Some levels of integration, such as non-integration (or isolation) and coexistence, are not complex in nature and do not require an overhaul of how either sensing or communications systems operate. However, this lack of complexity also implies that joint systems employing such methods of system integration will not see significant performance benefits on achieving RF convergence. As such, non-integration and coexistence methods are more short-term solutions to the spectral congestion problem. In the long term, systems will have to be co-designed together to see significant improvements in joint system performance.
Non-integration
editSystems employing non-integration methods are forced to operate in isolated regions of spectrum-space-time. However, in the real world, perfect isolation is not realizable and as a result, isolated systems will leak out and occupy segments of spectrum-space-time occupied by other systems. This is why systems that employ non-integration methods end up interfering with each other, and due to the philosophy of isolation being employed, each system makes no attempt at interference mitigation. Consequentially, each user's performance is degraded. Non-integration is one of the common and traditional solutions, and as highlighted here, is a part of the problem.
Coexistence
editRemote sensing and communications systems that implement coexistence methods are forced to coexist with each other and treat each other as sources of interference. This means that unlike non-integration methods, each system tries to perform interference mitigation. However, since both systems are not cooperative and have no knowledge about the other system, any information required to perform such interference mitigation is not shared or known and has to be estimated. As a result, interference mitigation performance is limited since it is dependent on the estimated information.
Cooperation
editCooperative techniques, unlike coexistence methods, do not require that both sensing and communications systems treat each other as sources of interference and both systems share some knowledge or information. Cooperative methods exploit this joint knowledge to enable both systems to effectively perform interference mitigation and subsequently improve their performance. Systems willingly share necessary information with each other in order to facilitate mutual interference mitigation. Cooperative methods are the first step toward designing joint systems and achieving RF convergence as an effective solution to the spectral congestion problem..
Co-design
editCo-design methods consist of jointly considering radar and communications systems when designing new systems to optimally share spectral resources. Such systems are jointly designed from scratch to efficiently utilize the spectrum and can potentially result in performance benefits when compared to an isolated approach to system design. Co-designed systems are not necessarily physically co-located. When operating from the same platform, co-design includes the cases where radar beams and waveforms are modulated to convey communications messages, an approach which is typically referred to as dual function radar communications systems.[16] For example, some recent experimentally demonstrated co-design approaches include:
- Tandem hopped radar and communications (THoRaCs),[17] where undistorted orthogonal frequency-division multiplexing (OFDM) sub-carriers are embedded into a frequency modulation (FM) radar waveform
- Phase-attached radar/communication (PARC),[18] where FM and continuous phase modulation (CPM) are merged into a single waveform
- Far-field radiated emission design (FFRED),[19][20] where FM multiple-input and multiple-output (MIMO) waveforms produce separate radar and communication beams in different spatial directions
See also
editReferences
edit- ^ a b Griffiths, Hugh; Cohen, Lawrence; Watts, Simon; Mokole, Eric; Baker, Chris; Wicks, Mike; Blunt, Shannon (2015). "Radar Spectrum Engineering and Management: Technical and Regulatory Issues". Proceedings of the IEEE. 103: 85–102. doi:10.1109/jproc.2014.2365517.
- ^ a b c d Paul, Bryan; Chiriyath, Alex R.; Bliss, Daniel W. (2017). "Survey of RF Communications and Sensing Convergence Research". IEEE Access. 5: 252–270. Bibcode:2017IEEEA...5..252P. doi:10.1109/access.2016.2639038.
- ^ "RF Communications and Sensing Convergence: Theory, Systems, and MATLAB-in-the-Loop Experiments Video". www.mathworks.com. Retrieved 2019-03-21.
- ^ Chiriyath, Alex R.; Paul, Bryan; Bliss, Daniel W. (2017). "Radar-Communications Convergence: Coexistence, Cooperation, and Co-Design". IEEE Transactions on Cognitive Communications and Networking. 3: 1–12. doi:10.1109/TCCN.2017.2666266. S2CID 13648867.
- ^ Blunt, Shannon D.; Perrins, Erik S. (October 2018). Radar and communication spectrum sharing. Blunt, Shannon D.; Perrins, Erik Samuel, 1973-. Edison. ISBN 9781785613579. OCLC 1079815876.
{{cite book}}
: CS1 maint: location missing publisher (link) - ^ Cailean, A.; Cagneau, B.; Chassagne, L.; Topsu, S.; Alayli, Y.; Blosseville, J-M. (2012). "Visible light communications: Application to cooperation between vehicles and road infrastructures" (PDF). 2012 IEEE Intelligent Vehicles Symposium. pp. 1055–1059. doi:10.1109/ivs.2012.6232225. ISBN 9781467321181. S2CID 6069018.
- ^ a b Sturm, Christian; Wiesbeck, Werner (2011). "Waveform Design and Signal Processing Aspects for Fusion of Wireless Communications and Radar Sensing". Proceedings of the IEEE. 99 (7): 1236–1259. doi:10.1109/jproc.2011.2131110. S2CID 1002111.
- ^ Orlando, V (1989). "The Mode S beacon radar system". Lincoln Laboratory Journal. 2 (3): 345–362.
- ^ "Shared Spectrum Access for Radar and Communications (SSPARC)". www.darpa.mil. Retrieved 2018-07-27.
- ^ Fortino, Giancarlo; Pathan, Mukaddim; Di Fatta, Giuseppe (2012). "Body Cloud: Integration of Cloud Computing and body sensor networks". 4th IEEE International Conference on Cloud Computing Technology and Science Proceedings. pp. 851–856. doi:10.1109/cloudcom.2012.6427537. ISBN 9781467345101. S2CID 17482174.
- ^ Alamri, Atif; Ansari, Wasai Shadab; Hassan, Mohammad Mehedi; Hossain, M. Shamim; Alelaiwi, Abdulhameed; Hossain, M. Anwar (January 2013). "A Survey on Sensor-Cloud: Architecture, Applications, and Approaches". International Journal of Distributed Sensor Networks. 9 (2): 917923. doi:10.1155/2013/917923. ISSN 1550-1477.
- ^ Gu, Changzhan; Peng, Zhengyu; Li, Changzhi (2016). "High-Precision Motion Detection Using Low-Complexity Doppler Radar with Digital Post-Distortion Technique". IEEE Transactions on Microwave Theory and Techniques: 1–11. doi:10.1109/tmtt.2016.2519881. S2CID 17399822.
- ^ Lipsky, Jessica. "Google Gestures at 60 GHz". EE Times.
- ^ Langer, Klaus-Dieter; Grubor, Jelena (2007). "Recent Developments in Optical Wireless Communications using Infrared and Visible Light". 2007 9th International Conference on Transparent Optical Networks. pp. 146–151. doi:10.1109/icton.2007.4296267. ISBN 978-1424412488. S2CID 17692631.
- ^ Bidigare, P. (2002). "The Shannon channel capacity of a radar system". Conference Record of the Thirty-Sixth Asilomar Conference on Signals, Systems and Computers, 2002. Vol. 1. pp. 113–117. doi:10.1109/acssc.2002.1197159. ISBN 978-0780375765. S2CID 22136743.
- ^ Hassanien, Aboulnasr; Amin, Moeness G.; Zhang, Yimin D.; Ahmad, Fauzia (October 2016). "Signaling strategies for dual-function radar communications: an overview". IEEE Aerospace and Electronic Systems Magazine. 31 (10): 36–45. doi:10.1109/MAES.2016.150225. ISSN 0885-8985. S2CID 8128653.
- ^ Ravenscroft, Brandon; McCormick, Patrick M.; Blunt, Shannon D.; Perrins, Erik; Metcalf, Justin G. (2018). "A power-efficient formulation of tandem-hopped radar & communications". 2018 IEEE Radar Conference (RadarConf18). pp. 1061–1066. doi:10.1109/RADAR.2018.8378708. ISBN 978-1-5386-4167-5. S2CID 49190086.
- ^ Sahin, Cenk; Metcalf, Justin G.; Kordik, Andrew; Kendo, Thomas; Corigliano, Thomas (2018). "Experimental Validation of Phase-Attached Radar/Communication (PARC) Waveforms: Radar Performance". 2018 International Conference on Radar (RADAR). pp. 1–6. doi:10.1109/RADAR.2018.8557302. ISBN 978-1-5386-7217-4. S2CID 54451278.
- ^ McCormick, Patrick M.; Blunt, Shannon D.; Metcalf, Justin G. (2017). "Simultaneous radar and communications emissions from a common aperture, Part I: Theory". 2017 IEEE Radar Conference (Radar Conf). pp. 1685–1690. doi:10.1109/RADAR.2017.7944478. ISBN 978-1-4673-8823-8. S2CID 22734837.
- ^ McCormick, Patrick M.; Ravenscroft, Brandon; Blunt, Shannon D.; Duly, Andrew J.; Metcalf, Justin G. (2017). "Simultaneous radar and communication emissions from a common aperture, Part II: Experimentation". 2017 IEEE Radar Conference (Radar Conf). pp. 1697–1702. doi:10.1109/RADAR.2017.7944480. ISBN 978-1-4673-8823-8. S2CID 21968573.