The Dallara F3 2019 is an open-wheel racing car developed by Italian manufacturer Dallara for use in the FIA Formula 3 Championship, a feeder series for Formula One. The F3 2019 is the first car used by the FIA Formula 3 Championship and was introduced for the championship's inaugural season and scheduled to be used until the 2024 season before being replaced by planned Dallara F3 2025 from 2025 season onwards. As the Formula 3 Championship is a spec series, the F3 2019 is raced by every team and driver competing in the series.[1][2] The F3 2019 was unveiled at the weekend of the final GP3 Series round in Abu Dhabi in November 2018 and later made its first public appearance when teams contesting the inaugural championship completed a test day at the Circuit de Nevers Magny-Cours in February 2019.[3]

Dallara F3 2019
CategoryFIA Formula 3
ConstructorDallara
PredecessorDallara GP3/16
SuccessorDallara F3 2025
Technical specifications[1][2]
ChassisCarbon fibre monocoque with honeycomb structure
Suspension (front)Double steel wishbones, pushrod operated, twin dampers, helicoidally spring suspension
Suspension (rear)As front
Length4,965 mm (195 in)
Width1,885 mm (74 in)
Height1,043 mm (41 in)
EngineMecachrome V634 3.4 L (207 cu in) V6 95 degree naturally aspirated, rear-mounted, rear-wheel-drive
TransmissionHewland F3B-200 6 forward + 1 reverse sequential paddle-shift
Power380 hp (283 kW) @8,000 rpm
Weight673 kg (1,484 lb) (including driver)
FuelElf LMS 89.6 MON, 101.6 RON unleaded (2019-2022) later Aramco Advanced 55% sustainable fuel (2023-present)
LubricantsElf HTX 840 (2019-2022) later Aramco Orizon (2023-present)
TyresPirelli P Zero (dry) and Pirelli Cinturato (wet) tyres
Competition history
Notable entrantsAll F3 Series teams
Notable driversAll F3 Series drivers
Debut2019 Barcelona Formula 3 round
Last event2024 Monza Formula 3 round
Constructors' ChampionshipsPrema Racing (2019–2020, 2022–2024)
Trident (2021)
Drivers' ChampionshipsRobert Shwartzman (2019)
Oscar Piastri (2020)
Dennis Hauger (2021)
Victor Martins (2022)
Gabriel Bortoleto (2023)
Leonardo Fornaroli (2024)

As of 2024, the Dallara F3 2019 remains the longest-serving FIA Formula 3 Championship chassis usage since 2019 through 2024 seasons.

Design

edit

Chassis

edit
 
A closer look at Dallara F3 2019 car.

The chassis is largely identical to the GP3/16 chassis but with a few tweaks as a major facelift and more longer length than GP3/16. Modifications to the chassis include a new front end with a range of suspension setup possibilities and anti-intrusion side panels as part of a push to improve safety.

The chassis also features the "halo" cockpit protection device, a wishbone-shaped frame mounted to the monocoque designed to deflect debris away from a driver's head in the case of an accident.

The rear wing still incorporates the Drag Reduction Systems (DRS) rear wing flap in a purpose for overtaking maneuver assist.

Engine package

edit

The F3 2019 carries over the same 3.4 L (207 cu in) V6 naturally-aspirated engine developed by Mecachrome Motorsport that powered its predecessor, the GP3/16, but the power output is slightly reduced from 300 kW (400 bhp) to 280 kW (380 bhp).[4]

Tyres

edit

Pirelli would remain as preferred official tyre partner and supplier of FIA Formula 3 Championship from 2019 season onwards. The tyre sizes and layouts were same as Dallara GP3/10, Dallara GP3/13 and Dallara GP3/16 tyre designs and thus kept the traditional 13-inch wheel rims.

See also

edit

References

edit
  1. ^ a b "The Car". fiaformula3.com. Formula Motorsport Limited. Archived from the original on 10 May 2019. Retrieved 10 February 2019.
  2. ^ a b Benyon, Jack; Evans, David (4 February 2019). "New FIA F3 car will be 'more difficult to drive' than GP3 machine". autosport.com. Motorsport Network. Retrieved 5 February 2019.
  3. ^ Benyon, Jack. "FIA F3 field drives new 2019 car for the first time in a shakedown". autosport.com. Motorsport Network. Retrieved 23 February 2019.
  4. ^ "New International F3 car set to use GP3 engine". motorsport.com. Motorsport Network. Archived from the original on 30 April 2022. Retrieved 5 July 2018.
edit