The Columbia 8.7 is a sailboat that was designed by Alan Payne as a cruiser and first built in 1976.[1][2][3][4]

Columbia 8.7
Development
DesignerAlan Payne
LocationCanada and United States
Year1976
No. built380
Builder(s)Hughes Boat Works
RoleCruiser
NameColumbia 8.7
Boat
Displacement8,500 lb (3,856 kg)
Draft4.67 ft (1.42 m)
Hull
Typemonohull
Constructionfibreglass
LOA28.58 ft (8.71 m)
LWL23.17 ft (7.06 m)
Beam10.00 ft (3.05 m)
Engine typeUniversal Atomic 4 gasoline engine
Hull appendages
Keel/board typefin keel
Ballast3,500 lb (1,588 kg)
Rudder(s)skeg-mounted rudder
Rig
Rig typeBermuda rig
I foretriangle height37.50 ft (11.43 m)
J foretriangle base12.30 ft (3.75 m)
P mainsail luff32.30 ft (9.85 m)
E mainsail foot11.50 ft (3.51 m)
Sails
Sailplanmasthead sloop
Mainsail area185.73 sq ft (17.255 m2)
Jib/genoa area230.63 sq ft (21.426 m2)
Total sail area416.35 sq ft (38.680 m2)

Production

edit

The design was built by Columbia Yachts in the United States from 1976 until 1979, when the moulds were purchased by Hughes Boat Works. Production continued at Hughes in Huron Park, Ontario in Canada from 1979 until 1982, after the company entered receivership. The moulds then went to Aura Yachts, who continued production of completed boats and kits until 1986 when Hughes Boatworks Inc. was re-formed and took over production once again. Production ended about 1987 with 380 boats completed. The Hughes plant was destroyed by fire in 1991 and the company wound up.[1][2][4][5][6][7]

Design

edit

The Columbia 8.7 is a recreational keelboat, built predominantly of solid, hand-laid fibreglass, with a balsa-cored deck. It has a masthead sloop rig, a raked stem, slightly angled transom, a skeg-mounted rudder controlled by a tiller and a fixed fin keel. Some late-production boats had a wheel steering. It displaces 8,500 lb (3,856 kg) and carries 3,500 lb (1,588 kg) of ballast.[1][2][8]

The boat has a draft of 4.67 ft (1.42 m) with the standard keel.[1][2]

The boat was factory-fitted with a number of different engines for docking and manoeuvring, located under the removable companionway steps. The original Columbia boats were offered with a Universal Atomic 4 gasoline engine or a Swedish 13 hp (10 kW) Volvo MD 7 A diesel engine. Later factory engines included a Japanese Yanmar two-cylinder diesel engine of 15 hp (11 kW) and a Yanmar 22.5 hp (17 kW) three-cylinder diesel offered by Hughes as a factory option. At least some later Aura-built boats has a 18 hp (13 kW) Volvo 2002 diesel. The fuel tank holds 12 U.S. gallons (45 L; 10.0 imp gal) and the fresh water tank has a capacity of 13 U.S. gallons (49 L; 11 imp gal).[1][2][8]

The design has sleeping accommodation for five people, with a double "V"-berth in the bow cabin, two straight settee berths in the main cabin and an aft quarter berth on the port side under the cockpit. The galley is located on the starboard side at the companionway ladder. The galley is L-shaped and is equipped with a two-burner stove, icebox and a sink. The head is located just aft of the bow cabin on the port side. Cabin headroom is 73 in (185 cm) and the interior is finished in teak.[1][2][4][8]

The design has a hull speed of 6.45 kn (11.95 km/h).[2]

Operational history

edit

In a 1997 review in Canadian Yachting, Pat Sturgeon wrote, "Alan Payne was somewhat ahead of his time when he designed this hull shape. The unique wine glass transom and flat sheer was a look that people tended to either love or hate, and the 10-foot beam, carried well aft, was a design feature that didn't become popular until the mid-eighties. But the Hughes' acquisition paid off, and the 8.7's debut at the Toronto Dockside show in 1979 was a big hit. Buyers found it was one of the few boats to offer over six feet of head room in a boat less than 30 feet in length."[8]

In a used boat review in 2016, in Practical Sailor, Darrell Nicholson wrote, "For better or worse, the Columbia 8.7 is modern in appearance, with a very straight sheer, pronounced forward overhang, and no overhang aft. The stern is decidedly unusual, with an exaggerated wineglass section transom. This reduces the apparent size of the back end of the boat, which would otherwise look very ungainly since beam is carried well aft. From an aesthetic point of view, you either like the stern or you don't ... Because of her excellent balance under sail and relative stability, the boat would make a good entry-level coastal cruiser, even for relatively inexperienced sailors."[9]

See also

edit

References

edit
  1. ^ a b c d e f McArthur, Bruce (2022). "Columbia 8.7 sailboat". sailboatdata.com. Archived from the original on 14 July 2022. Retrieved 14 July 2022.
  2. ^ a b c d e f g Sea Time Tech, LLC (2022). "Columbia 8.7". sailboat.guide. Archived from the original on 14 July 2022. Retrieved 14 July 2022.
  3. ^ McArthur, Bruce (2022). "Alan Payne 1921 - 1995". sailboatdata.com. Archived from the original on 13 July 2022. Retrieved 14 July 2022.
  4. ^ a b c "Columbia 8.7 Specifications". columbia-yachts.com. Archived from the original on 14 July 2022. Retrieved 14 July 2022.
  5. ^ McArthur, Bruce (2022). "Hughes Boat Works". sailboatdata.com. Archived from the original on 18 February 2021. Retrieved 14 July 2022.
  6. ^ Sea Time Tech, LLC (2022). "Hughes Boat Works". sailboat.guide. Archived from the original on 30 May 2022. Retrieved 14 July 2022.
  7. ^ McArthur, Bruce (2022). "Columbia Yachts". sailboatdata.com. Archived from the original on 18 February 2021. Retrieved 14 July 2022.
  8. ^ a b c d Sturgeon, Pat (1997). "Columbia 8.7". Canadian Yachting. Archived from the original on 14 July 2022. Retrieved 14 July 2022.
  9. ^ Nicholson, Darrell (19 March 2016). "Columbia 8.7". Practical Sailor. Archived from the original on 14 July 2022. Retrieved 14 July 2022.