DHP1, meaning Diesel Hydraulic Prototype number 1, was a prototype Type 3 mainline diesel locomotive built between 1962 and 1963 by Clayton to demonstrate their wares to British Railways.[2] It was designed for mixed traffic work, being equipped with steam heating facilities for working passenger trains.[citation needed] It was painted red, with the cab area above bonnet-level height painted cream.

Clayton DHP1
Type and origin
Power typeDiesel-hydraulic
BuilderClayton Equipment Company
Serial number4337U1
Build date1962-1963
Total produced1
Specifications
Configuration:
 • UICB'B'
 • CommonwealthB-B
Gauge4 ft 8+12 in (1,435 mm) standard gauge
Wheel diameter3 ft 3+12 in (1.003 m)
Minimum curve4 chains (260 ft; 80 m)
Wheelbase34 ft 0 in (10.36 m)
Length46 ft 3+12 in (14.11 m)
Width9 ft 0 in (2.74 m)
Height12 ft 6 in (3.81 m)
Loco weight56 long tons (57 t; 63 short tons)
Fuel capacity600 imp gal (2,700 L; 720 US gal)
Prime moverRolls-Royce C8TFL, 4 off
TransmissionHydraulic
MU workingNot fitted
Train heatingSteam
Train brakesVacuum
Performance figures
Maximum speed90 mph (140 km/h)
Power outputEngines: 375 hp (280 kW) at 1,800 rpm × 4
At rail: 1,200 hp (890 kW)
Tractive effortMaximum: 37,500 lbf (167 kN)
Career
OperatorsBritish Railways
DispositionScrapped
[1][additional citation(s) needed]

Visually similar to their Class 17 Type 1 product, though longer, and with the radiator grilles in the ends of the engine covers rather than the sides. The locomotive saw little service, mainly around the International Combustion works in Derby. The locomotive was broken up by Clayton's in April 1967.[1]

References

edit
  1. ^ a b "The Complete UK Modern Traction Locomotive Directory" (PDF). www.therailwaycentre.com. 1 November 2011. Archived from the original (PDF) on 24 July 2011. Retrieved 28 September 2024.
  2. ^ "Clayton Building on Success" (PDF). Railways Illustrated. January 2021. pp. 50–51.
edit