The Bahia 22, also called the Bahia 23, is a French trailerable sailboat that was designed by Philippe Harlé as a pocket cruiser and first built in 1983.[1][2][3]
Development | |
---|---|
Designer | Philippe Harlé |
Location | France |
Year | 1983 |
Builder(s) | Jeanneau |
Role | Cruiser |
Name | Bahia 22 |
Boat | |
Displacement | 1,852 lb (840 kg) |
Draft | 4.76 ft (1.45 m) with centerboard down |
Hull | |
Type | monohull |
Construction | fiberglass |
LOA | 22.74 ft (6.93 m) |
LWL | 18.04 ft (5.50 m) |
Beam | 7.94 ft (2.42 m) |
Engine type | outboard motor |
Hull appendages | |
Keel/board type | stub keel with centerboard |
Ballast | 620 lb (281 kg) |
Rudder(s) | transom-mounted rudder |
Rig | |
Rig type | Bermuda rig |
I foretriangle height | 20.16 ft (6.14 m) |
J foretriangle base | 7.83 ft (2.39 m) |
P mainsail luff | 24.33 ft (7.42 m) |
E mainsail foot | 9.00 ft (2.74 m) |
Sails | |
Sailplan | fractional rigged sloop |
Mainsail area | 109.49 sq ft (10.172 m2) |
Jib/genoa area | 78.93 sq ft (7.333 m2) |
Total sail area | 188.41 sq ft (17.504 m2) |
Racing | |
PHRF | 177 |
Production
editThe design was built by Jeanneau in France, between 1983 and 1987 but it is now out of production. The boat was also imported into the United States.[1][3][4]
Design
editThe Bahia 22 is a recreational keelboat, built predominantly of fiberglass, with wood trim. It has a fractional sloop rig, a raked stem, a plumb transom, a transom-hung rudder controlled by a tiller and a stub keel and centerboard or, optionally, fixed fin keel. It displaces 1,852 lb (840 kg) and carries 620 lb (281 kg) of ballast.[1][3]
The centerboard version of the boat has a draft of 4.76 ft (1.45 m) with the centerboard extended and 1.31 ft (0.40 m) with it retracted, allowing operation in shallow water or ground transportation on a trailer.[1][3]
The boat is normally fitted with a small 3 to 6 hp (2 to 4 kW) outboard motor for docking and maneuvering.[1][3]
The design has sleeping accommodation for four people, with a double "V"-berth in the bow cabin and two straight settee berths in the main cabin. The galley is located amidships on both sides just aft of the bow cabin. The galley is equipped with a stove and a sink. Cabin headroom is 59 in (150 cm).[1][3]
The design has a PHRF racing average handicap of 177 and a hull speed of 5.7 kn (10.6 km/h).[3]
Operational history
editIn a 2010 review Steve Henkel wrote, "the Bahia 23 (22' 9" LOA if you include both the outboard rudder and the bow pulpit in the length, but only 20' 4" LOD and 21" 11" LOA measured the conventional way) was built in France, and some few hulls were imported to the United States. As with many other French designs, a lot of thought has gone into the execution. Best features: The cabin arrangement is better than the average 20-footer's. Headroom is almost five feet ... [the s]ettee berths are both in the range of 7' 0" to 7' 6" long, A central table folds down, and also swings to one side for ingress and egress, or fore and aft for dining or other social activity. A companionway step can also serve as a bench at the table. On deck, lifeline stanchions have fixing points for beaching legs to hold the hull upright, in case you get caught on a falling tide. Worst features: The main hatch is hinged at the forward end, rather than sliding fore and aft, which limits headroom as well as visibility for those who like to stand in the companionway to look around."[3]
See also
editReferences
edit- ^ a b c d e f McArthur, Bruce (2020). "Bahia 22 (Jeanneau) sailboat". sailboatdata.com. Archived from the original on 5 June 2021. Retrieved 5 June 2021.
- ^ McArthur, Bruce (2021). "Philippe Harlé 1931 - 1991". sailboatdata.com. Archived from the original on 29 December 2020. Retrieved 5 June 2021.
- ^ a b c d e f g h Henkel, Steve: The Sailor's Book of Small Cruising Sailboats, page 349. International Marine/McGraw-Hill, 2010. ISBN 978-0-07-163652-0
- ^ McArthur, Bruce (2021). "Jeanneau (FRA)". sailboatdata.com. Archived from the original on 5 June 2021. Retrieved 5 June 2021.