ZF 6HP transmission

6HP
6HP
	Automatic Transmission 6HP 26 cutaway
Overview
Manufacturer	ZF Friedrichshafen
Production	2000–2014
Model years	2000–2014
Body and chassis
Class	6-Speed Longitudinal Automatic Transmission
Related	Ford 6R; GM 6L; Aisin AWTF-80 SC; MB 7G-Tronic
Chronology
Predecessor	ZF 5HP
Successor	ZF 8HP

6HP is ZF Friedrichshafen AG's trademark name for its 6-speed automatic transmission models (6-speed transmission with Hydraulic converter and Planetary gearsets) for longitudinal engine applications, designed and built by ZF's subsidiary in Saarbrücken. Released as the 6HP 26 in 2000, it was the first 6-speed automatic transmission in a production passenger car. Other variations of the first generation 6HP in addition to the 6HP 26, were 6HP19, and 6HP 32 having lower and higher torque capacity, respectively. In 2007, the second generation of the 6HP series was introduced, with models 6HP 21 and 6HP 28. A 6HP 34 was planned, but never went into production.^[1]

The last 6HP automatic transmission was produced by the Saarbrücken plant in March 2014 after 7,050,232 units were produced.^[2]^[3] The ZF plant in Shanghai continued to produce the 6HP for the Chinese market.^[2]

Gear Ratios^[a]
Gear Model	R	1	2	3	4	5	6	Total Span	Span Center	Avg. Step	Compo- nents

2000: 1st Generation											3 Gearsets 2 Brakes 3 Clutches
6HP 26 · 6HP 19 · 6HP 32	−3.403	4.171	2.340	1.521	1.143	0.867	0.691	6.035	1.698	1.433
2007: 2nd Generation
6HP 28 · 6HP 21 · 6HP 34	−3.403	4.171	2.340	1.521	1.143	0.867	0.691	6.035	1.698	1.433
Other Manufacturer
Aisin AWTF-80 SC · 2005	−3.394	4.148	2.370	1.556	1.155	0.859	0.686	6.049	1.687	1.433
Ford 6R 60 · 6R 80 · 2005	−3.403	4.171	2.340	1.521	1.143	0.867	0.691	6.035	1.698	1.433
Ford 6R 140 · 2005	−3.128	3.974	2.318	1.516	1.149	0.858	0.674	5.899	1.636	1.426
GM 6L 45 · 6L 50 · 2006	−3.200	4.065	2.371	1.551	1.157	0.853	0.674	6.035	1.655	1.433
GM 6L 80 · 6L 90 · 2005	−3.064	4.027	2.364	1.532	1.152	0.852	0.667	6.040	1.638	1.433

^ Differences in gear ratios have a measurable, direct impact on vehicle dynamics, performance, waste emissions as well as fuel mileage

Specifications

New Paradigm

The 6HP is the first transmission designed according to ZF's new paradigm. After gaining additional gear ratios only with additional components, this time the number of components has to decrease while the number of ratios still increase. The 6HP uses a Lepelletier gear mechanism epicyclic/planetary gearset, which can provide more gear ratios with significantly fewer components. This means the 6HP 26 is actually lighter than its five-speed 5HP predecessors. Coming from 5 gear ratios made of 10 main components^[a] to the 6 made of 8 now reflects, what major progress the Lepelletier gear mechanism means compared to conventional designs like the 5HP-family.

Basic Concept

A conventional planetary gearset and a compound Ravigneaux gearset is combined in a Lepelletier gear mechanism,^[4] to reduce both the size and weight. It was first realized here. Like all transmissions realized with Lepelletier transmissions, the 6HP also dispenses with the use of the direct gear ratio, making it one of the very few automatic transmission concepts without such a ratio.

It also has the capability to achieve torque converter lock-up on all 6 forward gears, and disengage it completely when at a standstill, significantly closing the fuel efficiency gap between automatic and manual transmissions.

Imperfections

Problems with this transmission are well known.^{[citation needed]} This transmission locks up the torque converter in all gears, increasing wear. Combined with a sealed transmission pan and "lifetime fluid", some people have experienced catastrophic transmission failure. Owners report shift issues when oil begins breaking down beyond 50K miles, hence shifting issues are common.^{[citation needed]}

There are also problems with the valve block and solenoids^{[citation needed]} When this failure starts to occur, shift quality and speed, torque transfer and even loss of ability to engage gears can occur. These problems led Volkswagen Group to extend the warranty on all of their vehicles equipped with this transmission to 100,000 miles or 10 years.^{[citation needed]}

^ 3 gearsets (of which 2 gearsets are combined as a compound Ravigneaux gearset), brakes, clutches

Gear Ratios
With Assessment^[a]		Planetary Gearset: Teeth^[b] Lepelletier gear mechanism			Count	Total^[c] Center^[d]	Avg.^[e]
With Assessment^[a]		Simple	Ravigneaux		Count	Total^[c] Center^[d]	Avg.^[e]

Manufacturer Model	Version First Delivery	S₁^[f] R₁^[g]	S₂^[h] R₂^[i]	S₃^[j] R₃^[k]	Brakes Clutches	Ratio Span	Gear Step^[l]
Gear Ratio	R ${i_{R}}$	1 ${i_{1}}$	2 ${i_{2}}$	3 ${i_{3}}$	4 ${i_{4}}$	5 ${i_{5}}$	6 ${i_{6}}$
Step^[l]	$-{\tfrac {i_{R}}{i_{1}}}$ ^[m]	${\tfrac {i_{1}}{i_{1}}}$	${\tfrac {i_{1}}{i_{2}}}$ ^[n]	${\tfrac {i_{2}}{i_{3}}}$	${\tfrac {i_{3}}{i_{4}}}$	${\tfrac {i_{4}}{i_{5}}}$	${\tfrac {i_{5}}{i_{6}}}$
Δ Step^[o]^[p]			${\tfrac {i_{1}}{i_{2}}}:{\tfrac {i_{2}}{i_{3}}}$	${\tfrac {i_{2}}{i_{3}}}:{\tfrac {i_{3}}{i_{4}}}$	${\tfrac {i_{3}}{i_{4}}}:{\tfrac {i_{4}}{i_{5}}}$	${\tfrac {i_{4}}{i_{5}}}:{\tfrac {i_{5}}{i_{6}}}$
Shaft Speed	${\tfrac {i_{1}}{i_{R}}}$	${\tfrac {i_{1}}{i_{1}}}$	${\tfrac {i_{1}}{i_{2}}}$	${\tfrac {i_{1}}{i_{3}}}$	${\tfrac {i_{1}}{i_{4}}}$	${\tfrac {i_{1}}{i_{5}}}$	${\tfrac {i_{1}}{i_{6}}}$
Δ Shaft Speed^[q]	$0-{\tfrac {i_{1}}{i_{R}}}$	${\tfrac {i_{1}}{i_{1}}}-0$	${\tfrac {i_{1}}{i_{2}}}-{\tfrac {i_{1}}{i_{1}}}$	${\tfrac {i_{1}}{i_{3}}}-{\tfrac {i_{1}}{i_{2}}}$	${\tfrac {i_{1}}{i_{4}}}-{\tfrac {i_{1}}{i_{3}}}$	${\tfrac {i_{1}}{i_{5}}}-{\tfrac {i_{1}}{i_{4}}}$	${\tfrac {i_{1}}{i_{6}}}-{\tfrac {i_{1}}{i_{5}}}$

2000: 1st Generation
ZF 6HP 26^[r] ZF 6HP 19^[r] ZF 6HP 32^[r]	600 N⋅m (443 lb⋅ft) 400 N⋅m (295 lb⋅ft)^[s] 750 N⋅m (553 lb⋅ft)^[5] 2000 (all)	37 71	31 38	38 85	2 3	6.0354 1.6977	1.4327^[l]
Gear Ratio	−3.4025^[m] $-{\tfrac {4,590}{1,349}}$	4.1708 ${\tfrac {9,180}{2,201}}$	2.3397^[n] ${\tfrac {211,140}{90,241}}$	1.5211 ${\tfrac {108}{71}}$	1.1428^[p]^[q] ${\tfrac {9,180}{8,033}}$	0.8672 ${\tfrac {4,590}{5,293}}$	0.6911 ${\tfrac {85}{123}}$
Step	0.8158^[m]	1.0000	1.7826^[n]	1.5382	1.3311	1.3178	1.2549
Δ Step^[o]			1.1589	1.1559	1.0101^[p]	1.0502
Speed	-1.2258	1.0000	1.7826	2.7419	3.6497	4.8096	6.0354
Δ Speed	1.2258	1.0000	0.7826	0.9593	0.9078^[q]	1.1599	1.2258
2007: 2nd Generation
ZF 6HP 28^[r] ZF 6HP 21^[r] ZF 6HP 34^[r]	600 N⋅m (443 lb⋅ft) 450 N⋅m (332 lb⋅ft)^[t] 750 N⋅m (553 lb⋅ft)^[u] 2007 · (all)	37 71	31 38	38 85	2 3	6.0354 1.6977	1.4327^[l]
Ratio	−3.4025^[m]	4.1708	2.3397^[n]	1.5211	1.1428^[p]^[q]	0.8672	0.6911
Other Manufacturer
Aisin AWTF-80 SC	450 N⋅m (332 lb⋅ft)^[6] 2005	50 90	36 44	44 96	2 3	6.0494 1.6865	1.4333^[l]
Gear Ratio	−3.3939^[m] $-{\tfrac {112}{33}}$	4.1481 ${\tfrac {112}{27}}$	2.3704^[n] ${\tfrac {64}{27}}$	1.5556 ${\tfrac {14}{9}}$	1.1546^[p] ${\tfrac {112}{97}}$	0.8593 ${\tfrac {336}{391}}$	0.6857^[q] ${\tfrac {24}{35}}$
Step	0.8182^[m]	1.0000	1.7500^[n]	1.5238	1.3472	1.3436	1.2532
Δ Step^[o]			1.1484	1.1311	1.0027^[p]	1.0722
Speed	-1.2222	1.0000	1.7500	2.6667	3.5926	4.8272	6.0494
Δ Speed	1.2222	1.0000	0.7500	0.9167	0.9259	1.2346	1.2222^[q]

Ford 6R 60 · 6R 80	600 N⋅m (443 lb⋅ft) · 2005 800 N⋅m (590 lb⋅ft) · 2005	37 71	31 38	38 85	2 3	6.0354 1.6977	1.4327^[l]
Ratio	−3.4025^[m]	4.1708	2.3397^[n]	1.5211	1.1428^[p]^[q]	0.8672	0.6911

Ford 6R 140	1,400 N⋅m (1,033 lb⋅ft) 2005	49 95	37 47	47 97	2 3	5.8993 1.6361	1.4261^[l]
Gear Ratio	−3.1283^[m] $-{\tfrac {13,968}{4,485}}$	3.9738 ${\tfrac {13,968}{3,515}}$	2.3181^[n]^[p] ${\tfrac {8,148}{3,515}}$	1.5158 ${\tfrac {144}{95}}$	1.1492^[p]^[q] ${\tfrac {13,968}{12,155}}$	0.8585 ${\tfrac {13,968}{16,271}}$	0.6736 ${\tfrac {97}{144}}$
Step	0.7872^[m]	1.0000	1.7143^[n]	1.5293	1.3190	1.3389	1.2744
Δ Step^[o]			1.1210^[p]	1.1594	0.9854^[p]	1.0504
Speed	-1.2703	1.0000	1.7143	2.6216	3.4580	4.6290	5.8993
Δ Speed	1.2703	1.0000	0.7143	0.9073	0.8364^[q]	1.1710	1.2703

GM 6L 45 · 6L 50	500 N⋅m (369 lb⋅ft) · 2006	49 89	37 47	47 97	2 3	6.0346 1.6548	1.4326^[l]
Gear Ratio	−3.2001^[m] $-{\tfrac {13,386}{4,183}}$	4.0650 ${\tfrac {13,386}{3,293}}$	2.3712^[n]^[p] ${\tfrac {15,617}{63586}}$	1.5506 ${\tfrac {138}{89}}$	1.1567^[p]^[q] ${\tfrac {13,386}{11,573}}$	0.8532 ${\tfrac {13,386}{15,689}}$	0.6736 ${\tfrac {97}{144}}$
Step	0.7872^[m]	1.0000	1.7143^[n]	1.5293	1.3406	1.3557	1.2662
Δ Step^[o]			1.1210^[p]	1.1408	0.9889^[p]	1.0703
Speed	-1.2703	1.0000	1.7143	2.6216	3.5144	4.7643	6.0346
Δ Speed	1.2703	1.0000	0.7143	0.9073	0.8928^[q]	1.2499	1.2703

GM 6L 80 · 6L 90	800 N⋅m (590 lb⋅ft) · 2005	50 94	35 46	46 92	2 3	6.0401 1.6384	1.4329^[l]
Gear Ratio	−3.0638^[m] $-{\tfrac {144}{47}}$	4.0267 ${\tfrac {6,624}{1,645}}$	2.3635^[n]^[p] ${\tfrac {3,888}{1,645}}$	1.5319 ${\tfrac {72}{47}}$	1.1522^[p]^[q] ${\tfrac {6,624}{5,749}}$	0.8521 ${\tfrac {144}{169}}$	0.6667 ${\tfrac {2}{3}}$
Step	0.7609^[m]	1.0000	1.7037^[n]	1.5429	1.3296	1.3522	1.2781
Δ Step^[o]			1.1043^[p]	1.1604	0.9832^[p]	1.0580
Speed	-1.3143	1.0000	1.7037	2.6286	3.4948	4.7258	6.0401
Δ Speed	1.3143	1.0000	0.7037	0.9249	0.8662^[q]	1.2310	1.3143

Ratio R & Even	$-{\tfrac {R_{3}(S_{1}+R_{1})}{R_{1}S_{3}}}$	${\tfrac {R_{3}(S_{1}+R_{1})(S_{2}+R_{2})}{R_{1}S_{2}(S_{3}+R_{3})}}$		${\tfrac {R_{2}R_{3}(S_{1}+R_{1})}{R_{2}R_{3}(S_{1}+R_{1})-S_{1}S_{2}S_{3}}}$		${\tfrac {R_{3}}{S_{3}+R_{3}}}$
Ratio Odd	${\tfrac {R_{2}R_{3}(S_{1}+R_{1})}{R_{1}S_{2}S_{3}}}$		${\tfrac {S_{1}+R_{1}}{R_{1}}}$		${\tfrac {R_{3}(S_{1}+R_{1})}{R_{3}(S_{1}+R_{1})+S_{1}S_{3}}}$
Algebra And Actuated Shift Elements
Brake A^[v]		❶	❶	❶	❶
Brake B^[w]	❶			❶		❶
Clutch C^[x]			❶				❶
Clutch D^[y]	❶	❶
Clutch E^[z]					❶	❶	❶

ZF 5HP 18^[aa]	310 N⋅m (229 lb⋅ft) · 1990	32 76	38^[ab] 34	34 98	3 4	4.9363 1.6495	1.4906^[l]
Gear Ratio	−4.0960^[m] $-{\tfrac {1,323}{323}}$	3.6648 ${\tfrac {1,323}{361}}$	1.9990^[n] ${\tfrac {7,938}{3,971}}$	1.4067^[l]^[p]^[q] ${\tfrac {294}{209}}$	1.0000 ${\tfrac {1}{1}}$	0.7424 ${\tfrac {49}{66}}$
Step	1.1176^[m]	1.0000	1.8333^[n]	1.4211^[l]	1.4067	1.3469
Δ Step^[o]			1.2901	1.0102^[p]	1.0444
Speed	-0.8947	1.0000	1.8333	2.6053	3.6648	4.9363
Δ Speed	0.8947	1.0000	0.8333	0.7719^[q]	1.0596	1.2715

^ The 6HP-transmission is the first one to use the Lepelletier gear mechanism ^ Layout Input and output are on opposite sides Planetary gearset 1 is on the input (turbine) side Input shafts are R₁ and, if actuated, C₂/C₃ (the combined carrier of the compound Ravigneaux gearset 2 and 3) Output shaft is R₃ (ring gear of gearset 3: outer Ravigneaux gearset) ^ Total Ratio Span (Total Ratio Spread · Total Gear Ratio) ${\tfrac {i_{n}}{i_{1}}}$ A wider span enables the downspeeding when driving outside the city limits increase the climbing ability when driving over mountain passes or off-road or when towing a trailer ^ Ratio Span's Center $(i_{n}i_{1})^{\tfrac {1}{2}}$ The center indicates the speed level of the transmission Together with the final drive ratio it gives the shaft speed level of the vehicle ^ Average Gear Step $({\tfrac {i_{n}}{i_{1}}})^{\tfrac {1}{n-1}}$ With decreasing step width the gears connect better to each other shifting comfort increases ^ Sun 1: sun gear of gearset 1 ^ Ring 1: ring gear of gearset 1 ^ Sun 2: sun gear of gearset 2: inner Ravigneaux gearset ^ Ring 2: ring gear of gearset 2: inner Ravigneaux gearset ^ Sun 3: sun gear of gearset 3: outer Ravigneaux gearset ^ Ring 3: ring gear of gearset 3: outer Ravigneaux gearset ^ ^a ^b ^c ^d ^e ^f ^g ^h ⁱ ^j ^k ^l Standard 50:50 — 50 % Is Above And 50 % Is Below The Average Gear Step — With steadily decreasing gear steps (yellow highlighted line Step) and a particularly large step from 1st to 2nd gear the lower half of the gear steps (between the small gears; rounded down, here the first 2) is always larger and the upper half of the gear steps (between the large gears; rounded up, here the last 3) is always smaller than the average gear step (cell highlighted yellow two rows above on the far right) lower half: smaller gear steps are a waste of possible ratios (red bold) upper half: larger gear steps are unsatisfactory (red bold) ^ ^a ^b ^c ^d ^e ^f ^g ^h ⁱ ^j ^k ^l ^m ⁿ ^o Standard R:1 — Reverse And 1st Gear Have The Same Ratio — The ideal reverse gear has the same transmission ratio as 1st gear no impairment when maneuvering especially when towing a trailer a torque converter can only partially compensate for this deficiency Plus 11.11 % minus 10 % compared to 1st gear is good Plus 25 % minus 20 % is acceptable (red) Above this is unsatisfactory (bold) ^ ^a ^b ^c ^d ^e ^f ^g ^h ⁱ ^j ^k ^l ^m ⁿ ^o Standard 1:2 — Gear Step 1st To 2nd Gear As Small As Possible — With continuously decreasing gear steps (yellow marked line Step) the largest gear step is the one from 1st to 2nd gear, which for a good speed connection and a smooth gear shift must be as small as possible A gear ratio of up to 1.6667:1 (5:3) is good Up to 1.7500:1 (7:4) is acceptable (red) Above is unsatisfactory (bold) ^ ^a ^b ^c ^d ^e ^f ^g From large to small gears (from right to left) ^ ^a ^b ^c ^d ^e ^f ^g ^h ⁱ ^j ^k ^l ^m ⁿ ^o ^p ^q ^r ^s ^t ^u Standard STEP — From Large To Small Gears: Steady And Progressive Increase In Gear Steps — Gear steps should increase: Δ Step (first green highlighted line Δ Step) is always greater than 1 As progressive as possible: Δ Step is always greater than the previous step Not progressively increasing is acceptable (red) Not increasing is unsatisfactory (bold) ^ ^a ^b ^c ^d ^e ^f ^g ^h ⁱ ^j ^k ^l ^m ⁿ ^o Standard SPEED — From Small To Large Gears: Steady Increase In Shaft Speed Difference — Shaft speed differences should increase: Δ Shaft Speed (second line marked in green Δ (Shaft) Speed) is always greater than the previous one 1 difference smaller than the previous one is acceptable (red) 2 consecutive ones are a waste of possible ratios (bold) ^ ^a ^b ^c ^d ^e ^f for Rear-wheel drive cars ^ 400 N⋅m (295 lbf⋅ft) or 400 N⋅m (295 lbf⋅ft) ^ produced in the PRC,^[3] alternatively known as 6HP 19tu and 6HP 19z ^ planned, but never went into production^[1] ^ Blocks R₂ and S₃ ^ Blocks C₂ (carrier 2) and C₃ (carrier 3) ^ Couples C₁ (carrier 1) and S₂ ^ Couples C₁ (carrier 1) with R₂ and S₃ ^ Couples R₁ with C₂ (carrier 2) and C₃ (carrier 3) ^ no Lepelletier gear mechanism is applied · shown here to reflect the progress the Lepelletier gear mechanism means ^ inner and outer sun gear of the compound Ravigneaux planetary gearset are inverted

Applications

First Generation · 2000

6HP 19

BMW X3
BMW 520i (E60)
BMW 528i (E60)
BMW 530i, (E60)
BMW 630i, (E63)
BMW 730i/li, (E65/E66)
BMW 318i, 320i, 325i, 328i, 330i, 335i (E9X), pre-LCI
BMW 116i, 118i, 120i (E87), pre-LCI, 135i (E82), 118d (E81)
BMW Z4 E85 LCI, E86 (All models except Z4 M)
Hyundai Genesis Coupe - 2010-2012 3.8L

6HP 19A

The 6HP 19A is a variation of the 6HP 19 for Four-wheel drive applications (Allrad, all wheel).It was used by the Volkswagen Group for some permanent four-wheel drive models.

Audi (B6) S4 (Typ 8E/8H)
Audi (B7) A4/S4 (Typ 8E/8H)
VW Phaeton (All models except 5.0 V10 TDI) (Typ 3D)
Audi A6 (Typ C6/4F) 3.0 TDI / 3.2 FSI / 3.0 TFSI
Audi A8 (Typ D3/4E) 3.0 TDI / 3.2 FSI

6HP 26

The 6HP 26 was the initial version and first used by the BMW 7 Series (E65) in 2001. Initially only used by premium brands, it was later available on the 2009 model year V8 Hyundai Genesis.

Several versions of the 6HP 26 are available depending on application and brand: 6HP 26, 6HP 26A and 6HP 26X.

Ford has developed their own versions (Ford 6R 60 and Ford 6R 80) based on the 6HP 26. Therefore, certain Ford vehicles will not be listed.

2001–2008 BMW 7 Series (E65)^[7] 735i, 745i, 760i, 730d and 740d
2002–2005 Jaguar XK8/XKR (X100)^[8]
2003–2012 Aston Martin DB9^[9]^[10]
2003–2010 BMW 5 Series (E60)
2003–2010 BMW 6 Series (E63) (Pre-LCI models, 645i / 650i / 635d)
2009–2012 Hyundai Genesis Sedan (4.6L V8)
2003–2008 Jaguar S-Type
2003–2009 Jaguar XJ (X350)
2003–2012 Rolls-Royce Phantom
2005–2011 BMW 3 Series (E90, E92)
2005–2016 Ford Falcon (BF,^[11] FG,^[12] FG X turbocharged I6 and V8)^[3] Although production of the transmission ended in 2014, Ford retained sufficient inventory to last until end of Falcon production in 2016.^[3]
2005–2014 Ford Territory (SY AWD;^[13] SZ petrol)^[14]
2005–2008 Lincoln Navigator (second generation facelift and third generation)
2006–2010 Jaguar XK/XKR (X150)
2007–2019 Maserati GranTurismo
2007–2012 Maserati Quattroporte
2007–present Rolls-Royce Phantom Drophead Coupé
2008–2012 Aston Martin DBS V12^[10]
2008–2012 BMW 7 Series (F01), except 740d xDrive, 760i/Li and Hybrid 7
2008–2011 Kia Mohave
2008–2012 Jaguar XF (X250)
2006–2009 Bentley Arnage
2008–2011 Bentley Brooklands
2010–2014 Aston Martin Rapide^[10]
2011 Hyundai Equus
2011–2012 Aston Martin Virage
2012–2014 Aston Martin Vanquish

6HP 26A

The 6HP 26A is a variation of the 6HP 26 for Four-wheel drive applications (Allrad, all wheel). It was used by the Volkswagen Group for some permanent four-wheel drive models and packages a TORSEN type center differential, and open front differential into the transmission assembly.

2006–2010 Audi Q7 (Typ 4L) (All models except 6.0 V12 TDI)
2003–2009 Audi A8 (D3, Typ 4E)
2006–2009 Audi S8 (D3, Typ 4E)
2003–2011 Bentley Continental GT
2005–2013 Bentley Flying Spur
2006–2011 Audi A6 (Typ C6/4F) 3.0 TDI Audi S6 (C6, Typ 4F)

6HP 26X & 6HP 26Z

The 6HP 26X and 6HP 26Z is another variation of the 6HP 26, also for Four-wheel drive applications. This transmission is suitable for 4WDs with a separate transfer box (the "X" stands for external 4WD).

2006–2013 Land Rover Range Rover (All with Jaguar type engines or TDV8)
2006–2013 Land Rover Range Rover Sport (4.4-litre and 5.0-litre AJV8 models)
2005–2009 Land Rover Discovery 3 (LR3 in North America)
2010–2013 Land Rover Discovery 4 (LR4 in North America)
2007 BMW X3 (E83) 3.0d (some models)
2005–2011 BMW 330(x)d xDrive (E90/91)
2004–2006 BMW X5 (E53) V8 and 3.0D
2007–2013 BMW X5 (E70) (some facelift models use 8HP)
2007–2010 BMW 5 series LCI (xdrive)
2003–2010 Porsche Cayenne (Typ 9PA)
2003–2010 VW Touareg (Typ 7L)

6HP 32

BMW E65 745d (LCI)

6HP 32A

The 6HP 32A is a variation of the 6HP 32 for Four-wheel drive applications (Allrad, all wheel).

Audi Q7 6.0 V12 TDI
Volkswagen Phaeton (5.0 V10 TDI only) (Typ 3D)

Second Generation · 2007

6HP 21

2011–2014 Ford Falcon (FG2 turbocharged I4, naturally-aspirated I6, turbocharged I6 and supercharge V8)
2014–2016 Ford Falcon (FG X turbocharged I4, naturally-aspirated I6, turbocharged I6 and supercharged V8)^[3]
2014–2016 Ford Territory (SZ II petrol)^[14]
2010–2012 BMW 320d Lci (Thailand) (Engine N47D20)
2011–2013 BMW 335i (E9X)
2013–2015 BMW X1 (E84) xDrive35i
2009 LCI (BMW 528i E60) (Engine: N52B30AE)
2014–Present Maxus G10
2007–2009 LCI (BMW 520d E61) ( Engine: N47D20A)

6HP 28

2009–2012 Jaguar XF (X250)
2009–2014 Jaguar XK (X150)
2010–2012 Jaguar XJ (X351)
2009–2013 BMW E90 (LCI 325d, 330d, 335d)
2007–2009 BMW E60 (LCI Models: 530d, 535d, 535i, 540i, 550i)
2007–2010 BMW E63 (LCI Models: 635d, 650i)
2009–2012 BMW F01 (750i)
2009–2012 BMW F02 (750Li)
2008–2010 Audi RS6 (C6, Typ 4F)

6HP 34

The 6HP 34 was planned for high-output applications. As the successor 8HP was about to be launched and innovations are typically introduced first in the premium segment, the 6HP 34 never went into production.^[1]

References

^ ^a ^b ^c "ZF 6HP34" (PDF). ZF Friedrichshafen AG. Retrieved 18 September 2009.^{[permanent dead link‍]}
^ ^a ^b "More than Seven Million: ZF Ends Production of Successful 6-Speed Automatic Transmission" (Press release). ZF Friedrichshafen. 31 March 2014. Retrieved 2 August 2016.
^ ^a ^b ^c ^d ^e "Review: Ford FG X Falcon (2014–16)". AustralianCar.Reviews. Retrieved 2 August 2016.
^ Riley, Mike (2013-09-01). "Lepelletier Planetary System". Transmission Digest. Archived from the original on 2023-06-21. Retrieved 2023-03-03.
^ "ZF 6HP26 Transmission" (PDF). Retrieved 2017-02-02.
^ Kasuya, Satoru; Taniguchi, Takao; Tsukamoto, Kazumasa; Hayabuchi, Masahiro; Nishida, Masaaki; Suzuki, Akitomo; Niki, Hiroshi (2005). "AISIN AW New High Torque Capacity Six-Speed Automatic Transmission for FWD vehicles". SAE Transactions. 114: 1193–1201. ISSN 0096-736X. JSTOR 44725152. Archived from the original on 2020-07-20. Retrieved 2020-07-09.
^ Markus, Frank (November 2001). "BMW 745i – First Drive Review". Car and Driver. Archived from the original on 18 September 2014.
^ "2003 model year XK service training technical guide" (PDF). Jaguar Cars North America. 30 September 2002. p. 4. Archived from the original (PDF) on 8 January 2016.
^ Crawford, Anthony (25 July 2007). "2007 Aston Martin DB9 Coupe Road Test". CarAdvice. Retrieved 13 September 2016.
^ ^a ^b ^c "Aston Martin Automatic Gearboxes". JT Automatics Ltd. Archived from the original on 25 April 2016.
^ "Review: Ford BF Falcon (2005–10)". AustralianCar.Reviews. Retrieved 2 August 2016.
^ "Review: Ford FG Falcon (2008–14)". AustralianCar.Reviews. Retrieved 2 August 2016.
^ "Review: Ford SY Territory (2005–11)". AustralianCar.Reviews. Retrieved 2 August 2016.
^ ^a ^b "Review: Ford SZ Territory (2011–16)". AustralianCar.Reviews. Retrieved 2 August 2016.

[4] Differences in gear ratios have a measurable, direct impact on vehicle dynamics, performance, waste emissions as well as fuel mileage

[5] 3 gearsets (of which 2 gearsets are combined as a compound Ravigneaux gearset), brakes, clutches

[7] The 6HP-transmission is the first one to use the Lepelletier gear mechanism

[8] Layout
Input and output are on opposite sides

Planetary gearset 1 is on the input (turbine) side

Input shafts are R₁ and, if actuated, C₂/C₃ (the combined carrier of the compound Ravigneaux gearset 2 and 3)

Output shaft is R₃ (ring gear of gearset 3: outer Ravigneaux gearset)

[5] Input and output are on opposite sides

[6] Planetary gearset 1 is on the input (turbine) side

[7] Input shafts are R₁ and, if actuated, C₂/C₃ (the combined carrier of the compound Ravigneaux gearset 2 and 3)

[8] Output shaft is R₃ (ring gear of gearset 3: outer Ravigneaux gearset)

[9] Total Ratio Span (Total Ratio Spread · Total Gear Ratio)
${\tfrac {i_{n}}{i_{1}}}$

A wider span enables the
downspeeding when driving outside the city limits

increase the climbing ability
when driving over mountain passes or off-road

or when towing a trailer

[10] ${\tfrac {i_{n}}{i_{1}}}$

[11] A wider span enables the
downspeeding when driving outside the city limits

increase the climbing ability
when driving over mountain passes or off-road

or when towing a trailer

[12] wnspeeding when driving outside the city limits

[13] rease the climbing ability
when driving over mountain passes or off-road

or when towing a trailer

[14] when driving over mountain passes or off-road

[15] r when towing a trailer

[10] Ratio Span's Center
$(i_{n}i_{1})^{\tfrac {1}{2}}$

The center indicates the speed level of the transmission

Together with the final drive ratio

it gives the shaft speed level of the vehicle

[17] $(i_{n}i_{1})^{\tfrac {1}{2}}$

[18] The center indicates the speed level of the transmission

[19] Together with the final drive ratio

[20] t gives the shaft speed level of the vehicle

[11] Average Gear Step
$({\tfrac {i_{n}}{i_{1}}})^{\tfrac {1}{n-1}}$

With decreasing step width
the gears connect better to each other

shifting comfort increases

[22] $({\tfrac {i_{n}}{i_{1}}})^{\tfrac {1}{n-1}}$

[23] With decreasing step width
the gears connect better to each other

shifting comfort increases

[24] the gears connect better to each other

[25] shifting comfort increases

[12] Sun 1: sun gear of gearset 1

[13] Ring 1: ring gear of gearset 1

[14] Sun 2: sun gear of gearset 2: inner Ravigneaux gearset

[15] Ring 2: ring gear of gearset 2: inner Ravigneaux gearset

[16] Sun 3: sun gear of gearset 3: outer Ravigneaux gearset

[17] Ring 3: ring gear of gearset 3: outer Ravigneaux gearset

[50:50-18] ^ ^a ^b ^c ^d ^e ^f ^g ^h ⁱ ^j ^k ^l Standard 50:50
— 50 % Is Above And 50 % Is Below The Average Gear Step —
With steadily decreasing gear steps (yellow highlighted line Step)

and a particularly large step from 1st to 2nd gear
the lower half of the gear steps (between the small gears; rounded down, here the first 2) is always larger

and the upper half of the gear steps (between the large gears; rounded up, here the last 3) is always smaller

than the average gear step (cell highlighted yellow two rows above on the far right)

lower half: smaller gear steps are a waste of possible ratios (red bold)

upper half: larger gear steps are unsatisfactory (red bold)

[33] With steadily decreasing gear steps (yellow highlighted line Step)

[34] rticularly large step from 1st to 2nd gear
the lower half of the gear steps (between the small gears; rounded down, here the first 2) is always larger

and the upper half of the gear steps (between the large gears; rounded up, here the last 3) is always smaller

[35] the lower half of the gear steps (between the small gears; rounded down, here the first 2) is always larger

[36] the upper half of the gear steps (between the large gears; rounded up, here the last 3) is always smaller

[37] than the average gear step (cell highlighted yellow two rows above on the far right)

[38] wer half: smaller gear steps are a waste of possible ratios (red bold)

[39] upper half: larger gear steps are unsatisfactory (red bold)

[R:1-19] ^ ^a ^b ^c ^d ^e ^f ^g ^h ⁱ ^j ^k ^l ^m ⁿ ^o Standard R:1
— Reverse And 1st Gear Have The Same Ratio —
The ideal reverse gear has the same transmission ratio as 1st gear
no impairment when maneuvering

especially when towing a trailer

a torque converter can only partially compensate for this deficiency

Plus 11.11 % minus 10 % compared to 1st gear is good

Plus 25 % minus 20 % is acceptable (red)

Above this is unsatisfactory (bold)

[41] The ideal reverse gear has the same transmission ratio as 1st gear
no impairment when maneuvering

especially when towing a trailer

a torque converter can only partially compensate for this deficiency

[42] rment when maneuvering

[43] specially when towing a trailer

[44] torque converter can only partially compensate for this deficiency

[45] Plus 11.11 % minus 10 % compared to 1st gear is good

[46] Plus 25 % minus 20 % is acceptable (red)

[47] Above this is unsatisfactory (bold)

[1:2-20] ^ ^a ^b ^c ^d ^e ^f ^g ^h ⁱ ^j ^k ^l ^m ⁿ ^o Standard 1:2
— Gear Step 1st To 2nd Gear As Small As Possible —
With continuously decreasing gear steps (yellow marked line Step)

the largest gear step is the one from 1st to 2nd gear, which
for a good speed connection and

a smooth gear shift

must be as small as possible
A gear ratio of up to 1.6667:1 (5:3) is good

Up to 1.7500:1 (7:4) is acceptable (red)

Above is unsatisfactory (bold)

[49] With continuously decreasing gear steps (yellow marked line Step)

[50] the largest gear step is the one from 1st to 2nd gear, which
for a good speed connection and

a smooth gear shift

[51] r a good speed connection and

[52] smooth gear shift

[53] ust be as small as possible
A gear ratio of up to 1.6667:1 (5:3) is good

Up to 1.7500:1 (7:4) is acceptable (red)

Above is unsatisfactory (bold)

[54] A gear ratio of up to 1.6667:1 (5:3) is good

[55] Up to 1.7500:1 (7:4) is acceptable (red)

[56] Above is unsatisfactory (bold)

[LS-21] ^ ^a ^b ^c ^d ^e ^f ^g From large to small gears (from right to left)

[step-22] ^ ^a ^b ^c ^d ^e ^f ^g ^h ⁱ ^j ^k ^l ^m ⁿ ^o ^p ^q ^r ^s ^t ^u Standard STEP
— From Large To Small Gears: Steady And Progressive Increase In Gear Steps —
Gear steps should
increase: Δ Step (first green highlighted line Δ Step) is always greater than 1

As progressive as possible: Δ Step is always greater than the previous step

Not progressively increasing is acceptable (red)

Not increasing is unsatisfactory (bold)

[59] Gear steps should
increase: Δ Step (first green highlighted line Δ Step) is always greater than 1

As progressive as possible: Δ Step is always greater than the previous step

[60] increase: Δ Step (first green highlighted line Δ Step) is always greater than 1

[61] As progressive as possible: Δ Step is always greater than the previous step

[62] Not progressively increasing is acceptable (red)

[63] Not increasing is unsatisfactory (bold)

[speed-23] ^ ^a ^b ^c ^d ^e ^f ^g ^h ⁱ ^j ^k ^l ^m ⁿ ^o Standard SPEED
— From Small To Large Gears: Steady Increase In Shaft Speed Difference —
Shaft speed differences should
increase: Δ Shaft Speed (second line marked in green Δ (Shaft) Speed) is always greater than the previous one

1 difference smaller than the previous one is acceptable (red)

2 consecutive ones are a waste of possible ratios (bold)

[65] Shaft speed differences should
increase: Δ Shaft Speed (second line marked in green Δ (Shaft) Speed) is always greater than the previous one

[66] increase: Δ Shaft Speed (second line marked in green Δ (Shaft) Speed) is always greater than the previous one

[67] 1 difference smaller than the previous one is acceptable (red)

[68] 2 consecutive ones are a waste of possible ratios (bold)

[RWD-24] ^ ^a ^b ^c ^d ^e ^f for Rear-wheel drive cars

[25] 400 N⋅m (295 lbf⋅ft) or 400 N⋅m (295 lbf⋅ft)

[27] roduced in the PRC,^[3] alternatively known as 6HP 19tu and 6HP 19z

[28] , but never went into production^[1]

[30] Blocks R₂ and S₃

[31] Blocks C₂ (carrier 2) and C₃ (carrier 3)

[32] Couples C₁ (carrier 1) and S₂

[33] Couples C₁ (carrier 1) with R₂ and S₃

[34] Couples R₁ with C₂ (carrier 2) and C₃ (carrier 3)

[35] Lepelletier gear mechanism is applied · shown here to reflect the progress the Lepelletier gear mechanism means

[36] r and outer sun gear of the compound Ravigneaux planetary gearset are inverted

[6HP34-1] "ZF 6HP34" (PDF). ZF Friedrichshafen AG. Retrieved 18 September 2009.^{[permanent dead link‍]}

[7Mio-2] "More than Seven Million: ZF Ends Production of Successful 6-Speed Automatic Transmission" (Press release). ZF Friedrichshafen. 31 March 2014. Retrieved 2 August 2016.

[Review_Falcon-3] "Review: Ford FG X Falcon (2014–16)". AustralianCar.Reviews. Retrieved 2 August 2016.

[6] Riley, Mike (2013-09-01). "Lepelletier Planetary System". Transmission Digest. Archived from the original on 2023-06-21. Retrieved 2023-03-03.

[26] "ZF 6HP26 Transmission" (PDF). Retrieved 2017-02-02.

[29] Kasuya, Satoru; Taniguchi, Takao; Tsukamoto, Kazumasa; Hayabuchi, Masahiro; Nishida, Masaaki; Suzuki, Akitomo; Niki, Hiroshi (2005). "AISIN AW New High Torque Capacity Six-Speed Automatic Transmission for FWD vehicles". SAE Transactions. 114: 1193–1201. ISSN 0096-736X. JSTOR 44725152. Archived from the original on 2020-07-20. Retrieved 2020-07-09.

[37] Markus, Frank (November 2001). "BMW 745i – First Drive Review". Car and Driver. Archived from the original on 18 September 2014.

[38] "2003 model year XK service training technical guide" (PDF). Jaguar Cars North America. 30 September 2002. p. 4. Archived from the original (PDF) on 8 January 2016.

[39] Crawford, Anthony (25 July 2007). "2007 Aston Martin DB9 Coupe Road Test". CarAdvice. Retrieved 13 September 2016.

[Aston_Martin-40] "Aston Martin Automatic Gearboxes". JT Automatics Ltd. Archived from the original on 25 April 2016.

[41] "Review: Ford BF Falcon (2005–10)". AustralianCar.Reviews. Retrieved 2 August 2016.

[42] "Review: Ford FG Falcon (2008–14)". AustralianCar.Reviews. Retrieved 2 August 2016.

[43] "Review: Ford SY Territory (2005–11)". AustralianCar.Reviews. Retrieved 2 August 2016.

[Review_Territory-44] "Review: Ford SZ Territory (2011–16)". AustralianCar.Reviews. Retrieved 2 August 2016.

[1]

[2]

[3]

[a]

[a]

[4]

[a]

[b]

[c]

[d]

[e]

[f]

[g]

[h]

[i]

[j]

[k]

[l]

[m]

[n]

[o]

[p]

[q]

[r]

[s]

[5]

[t]

[u]

[6]

[v]

[w]

[x]

[y]

[z]

[aa]

[ab]

[7]

[8]

[9]

[10]

[11]

[12]

[13]

[14]