Wikipedia

V/Line VLocity

(Redirected from VLocity)
"VLocity" redirects here. For the Linux platform, see VectorLinux.

The V/Line VLocity, sometimes called the VLocity 160,[a] is a diesel multiple unit train built by Bombardier Transportation and, later, by Alstom[1] in Dandenong for V/Line, the regional rail operator in the Australian state of Victoria. Continuously in production since 2003, the VLocity is the highest-speed train in the V/Line fleet, with a top speed of 160 km/h (100 mph). As of November 2024, with set 125 entering service, 124 3-car sets were in revenue service, one collision damaged set was in storage, and 16 more were under construction.[2]

V/Line VLocity
A VLocity train running through South Yarra station.
VLocity set 3VL99 at Hawksburn station, August 2023
Refurbished interior
Interior of a refurbished VLocity train, 2022
In service2005–present
ManufacturerBombardier Transportation/Alstom[1]
Built atDandenong
Constructed2004–present
Entered service22 December 2005
Number under construction48 carriages (22 sets)
Number built375 carriages (125 3-car sets)
Number in service372 carriages (124 3-car sets)
Number preserved0
Number scrapped1 (1129: accident damage, 1229 renumbered to 1241)
Formation3 semi-permanently coupled cars
  • DM(D)–TM–DM (3VL, 3VR)
  • DM(D)–TMC–DM (3VS)
Fleet numbers
  • 3VL00–3VL28, 3VL30–3VL75, 3VR76–3VR79, 3VL80–3VL92, 3VL99–3VL125 (broad gauge)
  • 3VS93–3VS98 (standard gauge)[2]
Capacity222 seats + 6 wheelchairs (per 3 carriage consist), formerly 140 seats + 4 wheelchairs (per 2 carriage consist)
OperatorsV/Line
DepotsSouthern Cross
Lines served


Specifications
Car body constructionStainless steel
Train length3-cars set:75.75 m (248 ft 6 in)
6-car set:151.5 m (497 ft 1 in)
Car length25.25 m (82 ft 10 in)
Width2.92 m (9 ft 7 in)
Doors4 per carriage (2 per side)
Maximum speed160 km/h (100 mph)
Weight171 t (168 long tons; 188 short tons) (3-car set)
Prime mover(s)1 Cummins QSK-19R per carriage
Power output559 kW (750 hp) per carriage
TransmissionVoith T312 hydraulic transmission
Acceleration0.9 m/s2 (3.0 ft/s2)
Deceleration
  • 0.95 m/s2 (3.1 ft/s2) (service)
  • 1.12 m/s2 (3.7 ft/s2) (emergency)
AuxiliariesCummins 80 kW (110 hp) generator
Coupling systemScharfenberg coupler
Track gauge
  • 3VL, 3VR: 1,600 mm (5 ft 3 in) broad gauge
  • 3VS: 1,435 mm (4 ft 8+1⁄2 in) standard gauge[2]

History

edit

Design origins and testing

edit

To honour a commitment made when it was awarded the V/Line franchise, National Express requested tenders in early 2000 for 29 two-carriage diesel multiple unit trains. The order, which coincided with the Regional Fast Rail project then being undertaken by the state government, was awarded to Adtranz's Dandenong rolling stock factory in mid-November with a value of A$410,000,000.[4][5][6][7] The contract was extended to 38 two-car units and an initial fifteen-year maintenance contract.[6][8] By the time the first was delivered, the V/Line franchise had reverted to the state government, and Adtranz had been taken over by Bombardier Transportation.[9][10]

The design was an evolution of the Xplorer/Endeavour railcars.[11] Although Bombardier originally intended to use the same body shell design as the Endeavour, difficulties with the aerodynamic drag characteristics of this shape for the intended 160 km/h (99 mph) operational speed of the VLocity led to a complete redesign of the train body.[12] Ultimately, the VLocity was designed concurrently with the B series being developed for Transperth as an electric multiple unit, resulting in a number of shared design elements.[13]

The original plan was for the 29 sets to be fitted with 2+3 seating, for a total capacity of 173 passengers per two-carriage set. However, in February 2003, that was changed to 144 seats in a 2+2 formation.[14]

In 2003, it was announced that the units would be built in Bombardier's Dandenong factory, with the bogies to be constructed at Bombardier's Derby Litchurch Lane Works in England, and the control system to be supplied by Bombardier's plant in Västerås, Sweden.[15] The first unit was completed in July 2004,[16] and testing began shortly after. The trains were tested at 160 km/h (99 mph) for the first time on 17 September, when Premier Steve Bracks joined a test run along a 30 km (19 mi) route from Warragul to Moe.[17]

Safety improvements were suggested at various stages in the development of the VLocity and, following the Waterfall accident in New South Wales, in which a train derailed when travelling too fast around a curve, and the Cairns Tilt Train derailment in Queensland, which occurred in similar circumstances, the State Government announced in December 2004 that the Train Protection & Warning System (TPWS) would be installed on Regional Fast Rail lines and the VLocity trains.[18] In August 2005, the State Government commissioned an investigation into the fitting of seat belts on the trains, although the concept was considered potentially expensive and technically challenging.[19]

Testing revealed noise levels were too high in the cabin,[20] delaying the introduction of the trains into service while the completed sets were modified.

Into service

edit
 
Interior of VLocity 2VL24 prior to refurbishment, 2006

The VLocity was introduced into service on the Ballarat line on 22 December 2005, with Bracks and Transport Minister Peter Batchelor travelling on the inaugural service from Southern Cross station. An unveiling ceremony was held at Ballarat and the train returned as a regular service.[21][22] Services on the Geelong and Bendigo lines followed on 3 February 2006[23] and 24 February 2006[24] respectively. Services to Traralgon and Seymour were introduced in September 2006. A timetable allowing the VLocity to operate at its 160km/h designed top speed was introduced on 3 September, despite allegations by the State Opposition of ongoing problems with the TPWS.[25] In addition, the Ararat and Echuca services are operated by VLocitys. From 2010, one Ballarat line service each day was extended to Maryborough.[26]

In 2005, the VLocity received an Australian Design Award, the first rail vehicle to do so, as well as an accolade from Engineers Australia.[13]

On 10 November 2008, seven-carriage-long VLocity trains (2 x 2-carriage + 1 x 3-carriage sets) commenced regular operation on peak-hour Geelong line services. Previously, the longest trains had been six carriages long (3 x 2-carriage sets).[27] With the introduction of fixed 3-carriage sets it was no longer possible to run 7-carriage trains but, in June 2022, a limited number of 9-carriage trains began running between Melbourne and Wyndham Vale during peak times. There are plans to also run 9 car services to Melton until the Metro network is extended to Melton when the line from Sunshine to Melton is electrified.

Additions to the fleet

edit
 
Chart showing the number of VLocity carriages ordered and in service at the end of each financial year from 2001 to 2018

After the initial order of 38 units, a further two VLocity units were later ordered to bring the total to 40, along with 22 new intermediate trailers to be inserted in the middle of existing VLocity sets. The first 14 were promised during the 2006 State Election,[28] and the order was placed in December the same year.[29] The order for the next eight was announced on 12 October 2007.[30]

In July 2008, the State Government ordered nine new 3-car units, and an additional intermediate car to be inserted into an existing 2-car unit,[26][31][32] with an extra four carriages added in February 2009.[33] The final unit of the order was delivered in September 2011.

With the availability of improved technologies for train control, from mid-2012, sets 3VL30, 3VL40 and 3VL50 were selected by Bombardier as test sets for equipment upgrades, in order to minimise the number of sets containing non-standard systems.[34]

In November 2012, the State Government announced an additional 40 carriages would be delivered between 2014 and 2016. The order comprised seven additional 3-car sets plus 19 intermediate cars to increase the remaining 2-car sets to 3-cars.[33][35][36][2]

In March 2014, the order for 40 carriages was increased to 43.[37] Further orders were placed for 21 carriages In May 2015 and 27 carriages in April 2016.[38][39] All 2-carriage VLocity sets had been converted to 3-carriage sets by May 2018.

 
An original VLocity train, 3VL01, at Hawksburn Station, August 2023

In December 2017, a further nine sets were ordered. Once all were delivered, the fleet comprised 88 3-car sets.[40][41] Of these, sets 76-79 were of a modified configuration, with a single toilet per three-carriage set instead of two, improvements to CCTV, downrating of the engines to 650 hp (480 kW) each for fuel economy and altered standing and seating arrangements. Sets from 80 to 88 reverted to two toilets with modified seating and a different front to accommodate a safer driving cabin. As of 6 November 2020 units 80-88 had entered revenue service.

After jockey Michelle Payne won the 2015 Melbourne Cup horse race riding Prince of Penzance, becoming the first female jockey to win the race, set 3VL9 was named Michelle Payne in honour of her regional Victorian ancestry. The set was the first and thus far only VLocity to be named and the first V/Line train to be named since the Sprinters in the late 20th century.[42]

In the 2018 Victorian state election campaign, the Andrews government promised that, if re-elected, it would place an order for 18 additional three-car VLocity sets to be delivered from 2021.[43]

In the 2022 Victorian state election campaign, the Andrews government promised that, if re-elected, it would place an order for an additional 23 three-car VLocity sets, as part of a promise to boost regional weekend services.[44][45] The government also committed to introducing nine-car VLocity trains to service the Melton railway line in Melbourne's west.[46] Production of the 23 sets began in March 2024.[47] When completed, there will be a fleet of 141 three car VLocity sets on the V/Line network on the current confirmed contract.

Wheel wear restrictions

edit

In January 2016, V/Line removed approximately a quarter of VLocity units from service after identifying unusually high rates of wear to wheel flanges. Compared to a normal rate of 0.7–1.0 millimetre per month (0.028–0.039 in/month), Bombardier's service regime noted a maximum wear rate of 2.6 mm/month (0.10 in/month).[48] Although unusual wear patterns had been observed since December of the previous year across the V/Line fleet, V/Line CEO Theo Taifalos ordered the withdrawal of the most badly affected units for safety reasons.[49]

Meanwhile, on 15 January 2016 a VLocity set failed to activate boom gates at the Progress Street level crossing in Dandenong. This led Metro Trains to ban all sets from operating on suburban lines until the issue had been resolved. The combined restrictions on the VLocity fleet led to the daily cancellation of nearly 70 V/Line services from mid-January.[50]

By the beginning of March, Bombardier had increased its capacity to remachine affected wheels, and track identified as potentially contributing to the wheel wear situation had been reprofiled; as a consequence, VLocity units were gradually returned to service.[51]

In April, a report by the Institute of Railway Technology at Monash University identified tight curves and an inadequate track lubrication on the newly opened Regional Rail Link, particularly along the North Melbourne Flyover near North Melbourne Station, which was upgraded as part of the project as a means of allowing V/Line services to access Platforms 1-8 at Southern Cross without needing to use Metropolitan tracks, as the root cause of the increase in wheel wear, and suggested that the relatively stiff suspension of the VLocity was the reason it had been most severely affected.[52]

Design evolution

edit

The New Generation Rollingstock ordered for Queensland Rail from Bombardier, although built in India, were based on the VLocity design and the 4000 class EMU used by Adelaide Metro, which was itself based on the VLocity shell and assembled in the same factory as the VLocity sets.[53] The Transperth B Series Train is closely related to the VLocity because both were designed at the same time by the same company.

A 2016 asset management report presented by V/Line noted that the VLocity would be unsuitable for higher passenger loads without a complete body redesign, and acknowledged that the operational performance of the VLocity was hampered by the inferior acceleration of V/Line's locomotive-hauled fleet.[54] The 2016–17 Victorian budget allocated funds for a project to redesign the VLocity for long-haul services, particularly those to Shepparton, Warrnambool and Albury/Wodonga.[55]

 
V/Line Next-generation VLocity 3VL87 arriving at Traralgon, 2020

By late 2017, design work had begun on modifications to the interior for units 3VR76-3VR79.[clarification needed (see talk)] Many of the changes were required for improved compliance with the Disability Discrimination Act. For the later order of 3VL80 and above, more significant alterations to the crash protection in the driver's cabin were introduced.[56]

In October 2018, the state government announced that a new interior layout would be introduced on units 3VR76-3VR79 and 3VL80-3VL88 with 14 extra seats per three-carriage set, at the expense of removing a toilet and bike storage rack from each set.[57] Cycling lobby groups criticised the new layout, but the government argued that the sets would be restricted to short-distance routes where the additional capacity would be valuable.[58] The first of the updated type entered service in August 2019.[citation needed]

The current VLocity fleet is restricted to a maximum 3 carriage length due to the size of the maintenance facilities for them making extending to 4, 5 or 6 carriage long fixed sets difficult to maintain.

Introduction to long-distance service

edit
 
V/Line VLocity 3VL61 at North Shore in September 2017

In the lead up to the 2018 Victorian election, opposition leader Matthew Guy announced that his party, if elected to government, would order 16 6-car VLocity variants from Bombardier for dedicated long-distance operation, with catering and first class facilities, but the Coalition did not win the election.[59]

From May 2018, improvements to level crossing infrastructure saw VLocity test runs to Bairnsdale, ahead of an introduction to revenue service on the line later in the year.[60] At the same time, government representatives announced that the long-haul variant of the VLocity would include onboard refreshment facilities and improved seats.[61] A media event was held at Bairnsdale in July of that year, at which it was announced that 2 of 3 daily Bairnsdale trains would be taken over by VLocity sets.

In May 2018, the Rail Tram and Bus Union (RTBU) announced that it had received confirmation that a buffet facility would be included in new intermediate carriages, added to existing sets to form 4-car trains for long-distance services.[62]

In April 2020, designs for standard gauge VLocity sets, to be used on the Albury line, were released by the Department of Transport, showing a standard 3-carriage layout with a centre trailer carriage kiosk.[63]

Standard gauge sets VS93 and VS94 entered service on 30 December 2021 on the Albury line.[64]

As of June 2022, there were six 3-carriage standard gauge sets in service, numbered VS93-98.

Design

edit

Technical

edit

There are four car types in the VLocity class:

  • The Driver Motor with Disabled Access cars, numbered 11xx & 21xx and designated DM(D) and;
  • The Driver Motor cars, numbered 12xx & 22xx and designated DM with either;
  • The standard Trailer Motor cars, numbered 13xx & 23xx and designated TM or;
  • The Kiosk fitted Trailer Motor cars, numbered 15xx and designated TMC.[48]

It is usual for the set of semi-permanently coupled cars to be described as zVLxx where z indicates the number of carriages in the fixed set while xx is the final two digits of the car designation – for example, the set 1150-1350-1250 would be described as 3VL50 while standard gauge sets use the VSxx format.,[65] the 2VL designation has not been used since May 2018 when the last remaining 2 carriage VLocity Set was converted to 3 carriages.

From the introduction of set 100 onward, the VL designation continued as VL100 and so on. However, set 100 onward use 2xxx carriage numbering, for example set VL101 consists of 2101-2301-2201

Power is provided by a Cummins QSK 19R diesel engine (559 kW (750 hp)) under each car, attached on a separate underframe. The engine powers both axles on one bogie in each car, while the other bogie is unpowered.[66] The engine is supplemented by an 80 kW (110 hp) Cummins auxiliary power unit for lighting and air-conditioning purposes. The VLocity uses a Voith T312 hydraulic transmission system with dynamic braking capabilities.[6]

According to Cummins, as a result of that propulsion system the VLocity is the most reliable diesel railcar in the world, with a mean distance between failures (MDBF) of 150,000 km (93,000 mi).[67] V/Line reported a MDBF of 157,805 km (98,055 mi) in the 2016–17 financial year.[68][b]

The primary suspension system of the VLocity is composed of a traction rod, with two elastomer bushes, linking the axle box and bogie frame.[66]

Among the design innovations in the VLocity units are the integration of the air-conditioning unit into the ceiling superstructure, and a structurally isolated crumple zone in the nose which can be entirely replaced with a new module following a crash.[12]

VLocity units are equipped with Scharfenberg couplers, enabling them to operate with other VLocity units.

VLocitys operate throughout the V/Line broad gauge passenger network and also on the ARTC controlled standard gauge line to Albury (NSW), as with most other V/Line services. The bogies were manufactured by Bombardier's Derby Litchurch Lane Works, and are fully gauge-convertible.[15]

The VLocity units have a design life of 35 years.[22] and a permanently coupled three-car unit has a mass of 171 tonnes.[69]

Interior

edit
 
A refurbished car with purple upholstery (orange for priority seating), 2022

The driver's console for the VLocity is a dashboard mounted slightly below the one-piece windscreen of the train. There are two seats in the driving cabin with the active driver's seat positioned slightly to the left of the train's centre. The second seat is slightly behind.[70] The train is controlled by a combined throttle and brake lever, which has six power levels and the ability to vary the brake application. There is also an independent brake lever and a reverser handle in the driver's primary controls.[71] When the trailer cars were added to the existing 2 carriage sets the driver cabs were retro fitted with the extra gauges to monitor the trailer unit driveline.

The seating layout for the VLocity is 2+2, with a mix of club-style seats facing each other, and aircraft-style rows. The seats cannot be rotated to face any particular direction, and seat backs do not recline. Four wheelchair spaces are provided in each set through the provision of tip-up seats. The VLocity offers economy-class seating only, although the seat width is equivalent to first class seating on V/Line locomotive-hauled services.[72] In response to passenger feedback, the seatback angle in the intermediate carriages was made 2.5 degrees more upright than the original carriages.[73] New deliveries from July 2010 onwards (3VL42 and above) featured a changed seatback angle and new seat fabrics.[74]

Although VLocity carriages have tinted windows, they lack the curtains as fitted to earlier V/Line rolling stock. Passengers may move freely between the three semi-permanently coupled vehicles in a set, but not between the sets themselves. Conductors move between coupled sets at station stops.

Tables were installed in one unit (2VL28) for evaluation purposes, but were later removed. In three-car VLocity units, 32 seats in the intermediate carriage have fold-down tray tables,[75] much like the first class seats on locomotive-hauled services.

Overhead racks exist for small baggage, while larger baggage is stored in designated baggage areas, with some spaces large enough for surfboards and bicycles. In January 2008, passengers were banned from taking bicycles on VLocity trains during peak hours, despite the designated bike area,[76] with the ban repealed in February 2008.[77]

The standard gauge long-distance sets have kiosk style catering.

The all-metal construction and metalised window tinting of the VLocity trains is an effective (measured at 20 dB) blocker of all forms of radio communications into and out of the carriages including Mobile phone signals preventing passengers from making reliable calls or utilising data devices. To overcome this in an Australian first a joint venture between Telstra, V/Line, VicTrack, Alstom and CommScope to retrofit specially designed 3G/4G Mobile Phone Repeater units into all existing VLocity sets in 2018 was created, this included the installation of repeater units in all new VLocity sets built after the joint venture commencement date. The Node AM repeater is manufactured by CommScope and is designed to rebroadcast the main 3G & 4G 700, 850, 900 & 1800 MHz frequency spectrum utilised by the three Mobiles Phone network providers, Telstra, Optus and TPG Telecom (Vodafone Australia) in Australia. The program included state government funding for 35 additional Mobile base stations to fix coverage Black Spots for the three networks that the internal repeaters could not overcome.

Livery

edit
 
Three coupled 2 carriage VLocity sets in the original livery at Little River, November 2006

The original VLocity livery consisted of purple and green facings on a stainless steel car body.In March 2008, newly built VLocity set 3VL41 was outshopped with an altered cab livery, following recommendations in level crossing accident reports that trains be made more more visible to motorists. Portions of reflective yellow were added to the cabs, along with more reflective silver directly beneath the cab windscreen. All units were retrospectively treated.

In June 2010, newly built set 3VL42 was released in a new livery of crimson stripe at roof level replacing the purple, and red replacing the green, a red stripe along the car body below the windows, white doors, and yellow front. The set also received high-intensity discharge (HID) headlights which project light for up to 1 kilometre (0.62 mi), modified windscreen wipers and cab windows.

In 2014, 3VL40 had a new Public Transport Victoria livery applied. All sets from 3VL52 were delivered in the purple livery, and it has been applied to earlier sets.

Reception and impact

edit

The VLocity seating layout is 2+2 instead of the 2+3 seating provided in other V/Line saloon-type carriages. A single VLocity car seats around 70 passengers, compared to 89 in the previous generation Sprinter with its narrower 2+3 seats.

The Regional Fast Rail project for which the VLocitys were built was criticised at the time for cost blow-outs during construction. These included the cost of installing extra safety measures deemed necessary for 160 km/h operation, which were added to the project after the Waterfall rail accident in New South Wales.[18]

By 2012, the VLocity trains and attendant decreases in travel time were regarded as major factors in the economic revival of towns along V/Line routes. The combined effect of the trains' comfort, speed and reliability was noted to have enabled the creation of new commuter belt locations outside of Melbourne, and the increases in train frequency which followed the introduction of the VLocity sets was said to have substantially improved the convenience of accessing Melbourne from the Bendigo, Ballarat and Geelong regions.[78]

A 2014 report by the federal government's Department of Infrastructure and Regional Development found that the VLocity trains had contributed to the overall success of the Regional Fast Rail project in increasing the accessibility of rail services for regional Victoria. The case study concluded that the improved ride quality of the trains was a significant contributor to improved passenger perceptions of rail services, and that the increased service frequency made possible by the trains was ultimately more beneficial from an operational perspective than any real or perceived time savings.[79]

In 2021, V/line introduced Vlocity services on the Albury line, replacing locomotive hauled services. To provide that service, V/Line designed a longer-distance Vlocity variant. The move to VLocity operation generated criticism, specifically relating to the reduced comfort, overcrowding, and lack of on-train amenities. There have been regular reports on social media that the onboard catering has not been in operation due to a lack of staff, and criticism of the quality of the offerings from the snack bar substandard.[80]

V/Line has introduced short-distance Vlocity train sets on the Warrnambool line replace locomotive hauled passenger services to Warrnambool, which has also been criticised. The complaints centred on the fact that V/Line did not provide trains purpose-designed for services to more distance regional cities. [81] Other criticisms about Vlocity trains relate to engine noise within the train itself, the quality of seats, and the lack of onboard catering.

Accidents and incidents

edit

On 28 April 2006, set 2VL29 was involved in a collision at a level crossing at Trawalla while travelling from Ararat, only seven days after it entered service. It collided with a large tri-axle road trailer carrying a 16-tonne block of stone and two heavy press machines. The front of the train withstood the impact with the trailer, but the press machines were thrown loose, striking and penetrating the cab. The incident caused two fatalities. At the time of the impact, three people were in the cab: the driver, who was seriously injured, and two off-duty Pacific National drivers, one of whom was killed and the other injured. As the train continued through the crossing, the rear trailer swung around and the stone block was thrown off, striking and partially penetrating the side of the leading car 1129, killing one passenger and injuring forty others.[82] The unit had been in service for seven days before the accident.[83] After the accident, both cars were taken to Newport Workshops for examination. Carriage 1129 suffered the most damage and was written off. Carriage 1229, having received relatively minor damage, was sent to Bombardier in Dandenong for repairs. It was later renumbered 1241 and marshalled together with new cars 1141 and 1341.

On 5 May 2006, set 2VL4, travelling on the 09:38 service from Southern Cross to Ararat, collided with a car at the protected Rockbank level crossing near Melton. Thirty train passengers and the driver of the car were taken to hospital.

On 26 February 2010, during a passenger service to Bendigo, the driver of sets 2VL6, 2VL5 and 2VL17, three two-car sets coupled together, was alerted to the smell of smoke in the leading car of 2VL5. The train stopped at Watergardens, where the driver, and a relief driver also on board the train, discovered a fire in the park brake system of 2VL5, which they were able to extinguish quickly.[84] 2VL6 was decoupled and continued to Bendigo without incident.[85] An investigation found that the park brake had either not been released on departure, or had been inadvertently activated by the relief driver who was travelling in the empty cab of the 2VL5 lead car.[86]

On 22 August 2014, a Metro Trains Comeng train, which had departed Laverton en route to Flinders Street, stopped after the driver noticed a loud noise and an apparent fault in his train's braking system.[87] VLocity set 2VL5, which was being transferred from Geelong to Southern Cross without passengers, passed a red automatic signal in a manner that did not conform to Section 3, Rule 1 of the 1994 Book of Rules and Operating Procedures, and the driver was unable to stop before colliding with the stationary Metro train. The driver of the VLocity and 8 passengers on the Metro train sustained minor injuries.[88] An investigation by the Australian Transport Safety Bureau found that the driver of the VLocity was travelling too fast for the situation, was distracted and the inadequate rear marker lights on the Metro EMU contributed to the collision.[89]

On 15 February 2017, set 3VL34 collided with a vehicle that had been abandoned on the line near Kangaroo Flat and derailed. Two people were injured.[90]

On 30 May 2020, set 3VL70 failed to stop at Ballarat station, due to a braking problem, and smashed through the historic Lydiard Street interlocked level crossing gates at 93 km/h, finally stopping some 600m past the station platform. The Lydiard Street level crossing was closed for a year. In May 2021, the Victorian government announced that the gates at the Lydiard Street level crossing gates would not be repaired, and would be replaced by boom barriers. The level crossing re-opened to traffic on 16 November 2021.

On 14 July 2022, set 3VL35, on a scheduled Echuca - Southern Cross service, collided with a semi trailer at an unprotected level crossing near Goornong, 30 km north-east of Bendigo. None of the 40 passengers on the train were injured, but both the train and truck driver were taken to hospital. VL35 was repaired and returned to revenue service.

On 11 December 2023, set 3VL100, on a scheduled Geelong Service, collided with a semi trailer that was blocking the Station Street level crossing in Norlane. None of the crew or 25 passengers on the train were injured, but the driver of the truck was killed.

On the afternoon of 30 November 2024 Standard Gauge set 3VS97 derailed at slow speed near Southern Cross No.1 Signal Box affecting all Standard Gauge services to Southern Cross, including the Sydney XPT service which terminated short at Broadmeadows, until it was rerailed later that evening. This was a positioning move so there were no passengers on board at the time.

Operations

edit

Technically, a maximum of four 3-car VLocity sets can be coupled together as a single train.[2] Between 2008 and 2016, some 7-car VLocity trains operated on the Geelong line, made up of two 2-car sets and a 3-car set.[27] However, following the conversion of the entire VLocity fleet to run as 3-car sets, almost all VLocity services have operated as three or six car trains. The exception is that, from 30 May 2022, due to heavy peak period patronage, some 9-car VLocity trains started operating between Wyndham Vale and Southern Cross during peak times,[91] although they are often reduced to six cars due to reliability problems.[citation needed]

VLocity trains are authorised to run in revenue service on the following lines:[2]

VLocity trains are permitted to run up to 160 km/h (99 mph) only on lines where all level crossings are protected by boom gates and lights and track upgrades have been completed. However, services to Echuca and Ararat (past Wendouree) run on lines that do not meet these standards, and as a result, cannot reach their full speed. The Echuca line is currently undergoing works to allow trains to reach 130 km/h (81 mph).[93] In 2017, the State Government announced upgrade works to extend VLocity services to Warrnambool, Albury and Bairnsdale,[94] and in 2019 announced upgrades to allow them to run to Shepparton.[95]

A VLocity simulator is used by V/Line for driver training. The simulator replicates the driving cabin of the VLocity and includes forward vision and rear mirror graphics and audio effects. An instructor positioned outside the simulator can control track conditions and replicate some faults with the train itself.[96]

On 21 June 2020, a 9-car train, consisting of sets 3VL7, 3VL63 and 3VL23, undertook a test run from Southern Cross to Wyndham Vale to test 9-car operation and platform fit at several stations.[97] As of June 2022 there is now selected 9 carriage services from Wyndham Vale and Melton to Southern Cross in peak periods.

Standard gauge VLocity services on the Albury line began on 30 December 2021,[92] while V/Locity services to Shepparton began revenue services from 31 October 2022.[citation needed] and VLocity services to Warrnambool began from 1 November 2024 with all Warrnambool services to be using VLocity sets once the upgraded stabling facilities at Warrnambool are completed in 2025.

Notes

edit

Explanatory notes

edit
  1. ^ An early spelling of the name, used in V/Line publications, was V'Locity.[3]
  2. ^ A "failure" is defined under this standard as an event resulting in a five-minute service delay.

Citations

edit
  1. ^ a b "Alstom in Australia and New Zealand". Alstom. Archived from the original on 4 March 2022. Retrieved 31 January 2022. VLocity Diesel Multiple Units
  2. ^ a b c d e f "VLocity". Vicsig. Archived from the original on 25 December 2019. Retrieved 23 September 2022.
  3. ^ "Annual Report 2003 – 2004". V/Line Passenger Corporation. July 2004. p. 8. Archived from the original on 15 March 2018. Retrieved 26 December 2017.
  4. ^ "Bracks invests". Railway Gazette. 1 April 2000. Archived from the original on 13 January 2018. Retrieved 12 January 2018.
  5. ^ "Victorian rolling stock contracts announced". Railway Digest. May 2000. p. 20.
  6. ^ a b c Dunn 2013, p. 275.
  7. ^ "Annual Report 2001" (PDF). National Express Group. p. 27. Archived (PDF) from the original on 1 December 2017. Retrieved 20 November 2017.
  8. ^ "Fast Rail bids". Railway Gazette International. December 2002. p. 727.
  9. ^ Osborne, Alistair (17 December 2002). "National Express walks out of Australian rail service". The Telegraph. Archived from the original on 12 January 2018. Retrieved 12 January 2018.
  10. ^ "Bombardier agrees to buy Adtranz". Railway Gazette International. September 2001. p. 601.
  11. ^ "VLocity Cars for V/Line Passenger Rail" (PDF). South Australian Chapter Newsletter 7/2007. Railway Technical Society of Australasia. July 2007. p. 6. Archived from the original (PDF) on 21 July 2008. Retrieved 20 November 2017.
  12. ^ a b Dunn 2013, p. 276.
  13. ^ a b Dunn 2013, p. 278.
  14. ^ "New fast trains to get four-across seating for greater comfort". Office of the Premier. Department of Premier and Cabiney. 21 February 2003. Archived from the original on 24 July 2005.
  15. ^ a b Hammond, Ian (July 2003). "Regional passenger revival underway". International Railway Journal. 43 (7): 22–23. Archived from the original on 1 July 2022. Retrieved 17 November 2017 – via Gale General OneFile.
  16. ^ "V/Line gets new regional trains". International Railway Journal. July 2004. p. 3.
  17. ^ "Australian State of Victoria Tests First Very Fast Train". AsiaPulse News. 17 September 2004.
  18. ^ a b "Fast rail in $200m blowout". The Age. Australian Associated Press. 14 December 2004. Archived from the original on 14 June 2016. Retrieved 27 November 2017.
  19. ^ Silkstone, Dan (25 August 2005). "Seatbelts mooted for rural trains". The Age. Archived from the original on 13 November 2012. Retrieved 27 November 2017.
  20. ^ Silkstone, Dan (11 October 2005). "Fast trains strike costly sound hitch". The Age. Archived from the original on 14 December 2005. Retrieved 25 April 2006.
  21. ^ "First high-speed trains service starts". The Age. Australian Associated Press. 22 December 2005. Archived from the original on 1 December 2017. Retrieved 27 November 2017.
  22. ^ a b "Our new V/Locity trains ready to go from today". The Courier. Ballarat. 21 December 2005. Archived from the original on 26 December 2017. Retrieved 26 December 2017.
  23. ^ "V/Locity trains roll at last". Dandenong Independent. 8 February 2006. p. 7.
  24. ^ "VLocity trains begin service". ABC News. 24 February 2006. Archived from the original on 28 October 2016. Retrieved 26 December 2017.
  25. ^ "Fast trains hit top gear". The Age. Australian Associated Press. 3 September 2006. Archived from the original on 1 December 2017. Retrieved 27 November 2017.
  26. ^ a b "More Regional Trains & Return of Passenger Services to Maryborough". Media Release from the Premier of Victoria. Department of Premier and Cabinet. 8 December 2008. Retrieved 8 December 2008.[permanent dead link‍]
  27. ^ a b "Super-Sized Trains for Geelong to Ease the Squeeze". Media Release from the Minister for Public Transport. V/Line. 7 November 2008. Retrieved 5 July 2010.[permanent dead link‍]
  28. ^ "Provincial Victoria: Moving Forward - Not Back" (PDF). p. 8. Archived from the original (PDF) on 28 September 2007. Retrieved 11 November 2006.
  29. ^ "Media Release: 1,000 Plus New Seats for Regional Rail commuters". www.dpc.vic.gov.au. Archived from the original on 5 June 2008. Retrieved 3 April 2008.
  30. ^ "Media Release: Extra Carriages to Boost Capacity on Regional Trains". www.dpc.vic.gov.au. Archived from the original on 23 July 2008. Retrieved 3 April 2008.
  31. ^ "New Train Sets to Boost Capacity on Regional Trains". Media Release from the Premier of Victoria. V/Line. 31 July 2008. Retrieved 31 July 2008.[permanent dead link‍]
  32. ^ "More VLocity in Victoria". Railway Gazette. 1 August 2008. Archived from the original on 1 December 2017. Retrieved 20 November 2017.
  33. ^ a b "Victorians seek more VLocity". Railway Gazette International. 25 February 2009. Archived from the original on 1 December 2017. Retrieved 27 November 2017.
  34. ^ Costanzo, Karl (September 2012). "Cab Committee Report: Southern Cross" (PDF). LocoLines. No. 55. RTBU Victorian Locomotive Division. p. 21. Archived (PDF) from the original on 18 March 2018. Retrieved 23 November 2017.
  35. ^ "State Government to buy 40 new V/Line carriages". Herald Sun. 26 November 2012.
  36. ^ "VLocity / Locomotives". Railpage. Archived from the original on 27 November 2017. Retrieved 20 November 2017.
  37. ^ "New VLocity train for the V/Line network". 24 March 2014. Archived from the original on 24 March 2014. Retrieved 24 March 2014.
  38. ^ $257 Million for New Regional Trains and Local Jobs Archived 5 July 2015 at the Wayback Machine Premier of Victoria 1 May 2015
  39. ^ Public transport investments in 2016/17 Victorian Budget Archived 2 May 2016 at the Wayback Machine Public Transport Victoria 27 April 2016
  40. ^ More Vlocity cars ordered for regional Victoria services Archived 22 December 2017 at the Wayback Machine International Railway Journal 20 December 2017
  41. ^ Bombardier to supply more Vlocity DMUs Archived 22 December 2017 at the Wayback Machine Railway Gazette International 20 December 2017
  42. ^ Pollock, Michael (22 December 2015). "'Payne Train' makes its debut l video". The Courier. Ballarat. Archived from the original on 1 December 2017. Retrieved 28 November 2017.
  43. ^ Carey, Adam (14 November 2018). "Labor promises to order more trains to run on V/Line's busiest lines". The Age. Archived from the original on 20 February 2019. Retrieved 19 February 2019.
  44. ^ "Andrews issues price promise for V/Line fares". Shepparton News. 7 November 2022. Archived from the original on 8 November 2022. Retrieved 8 November 2022.
  45. ^ Daniel, Andrews (2 November 2022). "Cheaper Fares, More Trains, Extra Services For The Regions". Dan Andrews. Archived from the original on 8 November 2022. Retrieved 8 November 2022.
  46. ^ "Bigger, Better Trains For Melton And The West". Dan Andrews. 6 October 2022. Archived from the original on 8 November 2022. Retrieved 8 November 2022.
  47. ^ "Manufacturing Begins On New VLocity Trains". Premier of Victoria. 18 March 2024. Retrieved 20 March 2024.
  48. ^ a b Mutton et al. 2016, p. 7.
  49. ^ Carey, Adam (14 January 2016). "V/Line trains forced out of service by mysterious wheel fault". The Age. Archived from the original on 2 December 2017. Retrieved 18 November 2017.
  50. ^ Preiss, Benjamin; Calligeros, Marissa; Carey, Adam (20 January 2016). "V/Line to provide free travel as compensation for disruptions". The Age. Archived from the original on 9 January 2018. Retrieved 18 November 2017.
  51. ^ Probert, Oliver (9 March 2016). "VLocity fleet ahead of schedule for return – Rail Express". Rail Express. Archived from the original on 1 December 2017. Retrieved 18 November 2017.
  52. ^ Mutton et al. 2016, pp. 70–72.
  53. ^ "Financial close for Queensland New Generation Rollingstock contract". Railway Gazette. 29 January 2014. Archived from the original on 6 July 2017. Retrieved 28 November 2017.
  54. ^ Hunter, Jim (21 September 2016). "Shaping the Future of Railway: V/Line Asset Management" (PDF). Monash Institute of Railway Technology. V/Line Network Engineering. p. 11. Archived (PDF) from the original on 13 December 2017. Retrieved 13 December 2017.
  55. ^ Morgan, Shana (18 October 2017). "'Redesign is under way' on faster VLocity trains for the North East". The Border Mail. Archived from the original on 1 December 2017. Retrieved 20 November 2017.
  56. ^ Costanzo, Karl (March 2018). "V/Line Cab Committee Report" (PDF). LocoLines. No. 70. Rail Tram and Bus Union Victorian Locomotive Division. Archived (PDF) from the original on 16 May 2018. Retrieved 15 May 2018.
  57. ^ "More Trains With More Space For Regional Passengers". Premier of Victoria. 15 October 2018. Archived from the original on 20 February 2019. Retrieved 19 February 2019.
  58. ^ Jacks, Timna (15 October 2018). "More seats but fewer thrones on new V/Line trains". The Age. Archived from the original on 20 February 2019. Retrieved 19 February 2019.
  59. ^ Willingham, Richard (4 March 2018). "V/Line regional rail to get $633m boost under Coalition election promise". ABC News. Archived from the original on 17 July 2018. Retrieved 4 July 2018.
  60. ^ "VLocity test train rolls into Stratford station". Gippsland Times. 30 April 2018. Archived from the original on 1 May 2018. Retrieved 1 May 2018.
  61. ^ Howard, Jessica (16 May 2018). "Faster, comfy trains pledge but when will it happen?". The Standard. Archived from the original on 21 May 2018. Retrieved 20 May 2018.
  62. ^ Ford, Jeff (20 June 2018). "Buffets On VLocitys" (PDF). RTBU Express. Rail, Tram and Bus Union Victorian Branch. p. 2. Archived (PDF) from the original on 4 July 2018. Retrieved 4 July 2018.
  63. ^ Department of Transport (23 April 2020). "Design unveiled for new North East VLocity trains". transport.vic.gov.au. Archived from the original on 14 March 2022. Retrieved 4 July 2020.
  64. ^ "Modern VLocity trains for Albury line passengers". V/Line. Archived from the original on 8 January 2022. Retrieved 8 January 2022.
  65. ^ Newsrail Style Guide (PDF). Australian Railway Historical Society. 2016. p. 8. Archived (PDF) from the original on 13 March 2018. Retrieved 28 November 2017.
  66. ^ a b Mutton et al. 2016, p. 11.
  67. ^ "VLocity: the most reliable rail car in the world". Cummins South Pacific. 2014. Archived from the original on 23 August 2017. Retrieved 18 November 2017.
  68. ^ "Asset Management". Annual Report 2016–2017. V/Line Corporation. 2017. p. 25. Archived from the original on 15 March 2018. Retrieved 13 December 2017.
  69. ^ "Network Service Plan - Addenda NA_NSP_03 – R31-2016". V/Line Corporate Site. V/Line Corporation. p. 44. Archived from the original on 13 March 2021. Retrieved 21 September 2021.
  70. ^ OCITS 2011, p. 12.
  71. ^ ATSB 2016, p. 9–10.
  72. ^ "New VLocity trains". V/Line. Retrieved 9 November 2006.[permanent dead link‍]
  73. ^ "V/Line is expanding". V/Line. Retrieved 9 November 2006.[permanent dead link‍]
  74. ^ Wong, Marcus. "New style interior onboard VL00: yellow poles and the same fabric as all of the other refurbished V/Line trains". Wongm's Rail Gallery. Archived from the original on 1 December 2017. Retrieved 27 November 2017.
  75. ^ "Looking down VLocity centre car 1341 and the tray tables". Wongm's Rail Gallery. railgallery.wongm.com. 4 July 2008. Archived from the original on 25 August 2011. Retrieved 5 July 2010.
  76. ^ Train bike ban sparks protest Archived 5 November 2012 at the Wayback Machine ABC News 23 January 2008
  77. ^ Minister lifts bicycle ban on peak-hour trains Archived 17 February 2008 at the Wayback Machine The Age 15 February 2008
  78. ^ Stephens, Andrew (21 January 2012). "Picture yourself here?". The Age. Archived from the original on 1 December 2017. Retrieved 19 November 2017.
  79. ^ Improving regional passenger rail services, Report 137 (PDF). Bureau of Infrastructure, Transport and Regional Economics. May 2014. pp. 61–70. ISBN 9781922205674. Archived from the original (PDF) on 8 March 2017.
  80. ^ "Regional rail catering services". Victorian Parliament Hansard.
  81. ^ gobstopper (16 August 2024). "Café booted from Bairnsdale line". Retrieved 16 August 2024.
  82. ^ Whelan, Melanie (29 April 2016). "Decade since Trawalla's rail disaster". Ballarat Courier. Archived from the original on 21 January 2019. Retrieved 20 January 2019.
  83. ^ Moynihan, Stephen; Petrie, Andrea (29 April 2006). "Two killed in Ararat fast-train crash". The Age. Archived from the original on 27 December 2017. Retrieved 26 December 2017.
  84. ^ OCITS 2010, p. 11.
  85. ^ OCITS 2010, p. 9.
  86. ^ OCITS 2010, p. 27.
  87. ^ ATSB 2016, p. 3.
  88. ^ ATSB 2016, pp. 4–5.
  89. ^ ATSB 2016, p. 21.
  90. ^ "Bendigo train, car collide near Kangaroo Flat". Bendigo Advertiser. Fairfax Media. 15 February 2017. Archived from the original on 18 February 2017. Retrieved 19 February 2017.
  91. ^ "Increasing Train Capacity In Melbourne's West". Premier of Victoria. Archived from the original on 30 May 2022. Retrieved 31 May 2022.
  92. ^ a b "Modern VLocity trains for Albury line passengers". V/Line. Archived from the original on 8 January 2022. Retrieved 9 January 2022.
  93. ^ "Bendigo and Echuca Line Upgrade". Victoria's Big Build. Archived from the original on 2 April 2022. Retrieved 20 April 2022.
  94. ^ Payne, Nicholas (21 July 2017). "Regional rail: Plan to run faster VLocity trains to Warrnambool will cut 20 minutes off commute". Geelong Advertiser. Archived from the original on 1 July 2022. Retrieved 19 November 2017.
  95. ^ "More Trains And Better Services On The Shepparton Line". 14 February 2019. Archived from the original on 28 October 2019. Retrieved 28 October 2019.
  96. ^ Marotta, Marc (September 2013). "Secretary's Report" (PDF). LocoLines. No. 58. RTBU Victorian Locomotive Division. p. 4. Archived (PDF) from the original on 18 March 2018. Retrieved 27 November 2017.
  97. ^ Wong, Marcus. "V/Line - 9-car VLocity train testing". Wongm's Rail Gallery. Archived from the original on 4 July 2020. Retrieved 4 July 2020.

References

edit
 
Wikimedia Commons has media related to VLocity.
Retrieved from "https://en.wiki.x.io/w/index.php?title=V/Line_VLocity&oldid=1263016453"