Wikipedia

Urea

(Redirected from Ureylene)
Not to be confused with uric acid or urine.
"Carbonic diamide" redirects here. For the azide, see carbonyl diazide.

Urea, also called carbamide (because it is a diamide of carbonic acid), is an organic compound with chemical formula CO(NH2)2. This amide has two amino groups (–NH2) joined by a carbonyl functional group (–C(=O)–). It is thus the simplest amide of carbamic acid.[6]

Urea
Names
Pronunciation urea /jʊəˈriːə/, carbamide /ˈkɑːrbəmaɪd/
Preferred IUPAC name
Urea[1]
Systematic IUPAC name
Carbonic diamide[1]
Other names
  • Carbamide
  • Carbonyldiamide
  • Carbonyldiamine
  • Diaminomethanal
  • Diaminomethanone
Identifiers
3D model (JSmol)
635724
ChEBI
ChEMBL
ChemSpider
DrugBank
ECHA InfoCard 100.000.286 Edit this at Wikidata
E number E927b (glazing agents, ...)
1378
KEGG
RTECS number
  • YR6250000
UNII
  • InChI=1S/CH4N2O/c2-1(3)4/h(H4,2,3,4) checkY
    Key: XSQUKJJJFZCRTK-UHFFFAOYSA-N checkY
  • InChI=1/CH4N2O/c2-1(3)4/h(H4,2,3,4)
    Key: XSQUKJJJFZCRTK-UHFFFAOYAF
  • C(=O)(N)N
Properties
CO(NH2)2
Molar mass 60.06 g/mol
Appearance White solid
Density 1.32 g/cm3
Melting point 133 to 135 °C (271 to 275 °F; 406 to 408 K)
Boiling point decomposes
545 g/L (at 25 °C)[2]
Solubility 500 g/L glycerol[3]

  50 g/L ethanol
  ~4 g/L acetonitrile[4]

Basicity (pKb) 13.9[5]
Conjugate acid Uronium
−33.4·10−6 cm3/mol
Structure
4.56 D
ThermochemistryCRC Handbook
−333.19 kJ/mol
−197.15 kJ/mol
Pharmacology
B05BC02 (WHO) D02AE01 (WHO)
Hazards
NFPA 704 (fire diamond)
NFPA 704 four-colored diamondHealth 1: Exposure would cause irritation but only minor residual injury. E.g. turpentineFlammability 1: Must be pre-heated before ignition can occur. Flash point over 93 °C (200 °F). E.g. canola oilInstability 0: Normally stable, even under fire exposure conditions, and is not reactive with water. E.g. liquid nitrogenSpecial hazards (white): no code
1
1
0
Flash point Non-flammable
Lethal dose or concentration (LD, LC):
8500 mg/kg (oral, rat)
Safety data sheet (SDS) ICSC 0595
Related compounds
Related ureas
 Thiourea
Hydroxycarbamide
Related compounds
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).
checkY verify (what is checkY☒N ?)

Urea serves an important role in the cellular metabolism of nitrogen-containing compounds by animals and is the main nitrogen-containing substance in the urine of mammals. Urea is Neo-Latin, from French urée, from Ancient Greek οὖρον (oûron) 'urine', itself from Proto-Indo-European *h₂worsom.

It is a colorless, odorless solid, highly soluble in water, and practically non-toxic (LD50 is 15 g/kg for rats).[7] Dissolved in water, it is neither acidic nor alkaline. The body uses it in many processes, most notably nitrogen excretion. The liver forms it by combining two ammonia molecules (NH3) with a carbon dioxide (CO2) molecule in the urea cycle. Urea is widely used in fertilizers as a source of nitrogen (N) and is an important raw material for the chemical industry.

In 1828, Friedrich Wöhler discovered that urea can be produced from inorganic starting materials, which was an important conceptual milestone in chemistry. This showed for the first time that a substance previously known only as a byproduct of life could be synthesized in the laboratory without biological starting materials, thereby contradicting the widely held doctrine of vitalism, which stated that only living organisms could produce the chemicals of life.

Properties

edit

Molecular and crystal structure

edit

The structure of the molecule of urea is O=C(−NH2)2. The urea molecule is planar when in a solid crystal because of sp2 hybridization of the N orbitals.[8][9] It is non-planar with C2 symmetry when in the gas phase[10] or in aqueous solution,[9] with C–N–H and H–N–H bond angles that are intermediate between the trigonal planar angle of 120° and the tetrahedral angle of 109.5°. In solid urea, the oxygen center is engaged in two N–H–O hydrogen bonds. The resulting hydrogen-bond network is probably established at the cost of efficient molecular packing: The structure is quite open, the ribbons forming tunnels with square cross-section. The carbon in urea is described as sp2 hybridized, the C-N bonds have significant double bond character, and the carbonyl oxygen is relatively basic. Urea's high aqueous solubility reflects its ability to engage in extensive hydrogen bonding with water.

By virtue of its tendency to form porous frameworks, urea has the ability to trap many organic compounds. In these so-called clathrates, the organic "guest" molecules are held in channels formed by interpenetrating helices composed of hydrogen-bonded urea molecules. In this way, urea-clathrates have been well investigated for separations.[11]

Reactions

edit
 
Structure of [Fe(urea)6]2+ showing intramolecular hydrogen bonds.[12] Color code: blue = N, red = O.

Urea is a weak base, with a pKb of 13.9.[5] When combined with strong acids, it undergoes protonation at oxygen to form uronium salts.[13][14] It is also a Lewis base, forming metal complexes of the type [M(urea)6]n+.[15]

Urea reacts with malonic esters to make barbituric acids.

Thermolysis

edit

Molten urea decomposes into ammonium cyanate at about 152 °C, and into ammonia and isocyanic acid above 160 °C:[16]

CO(NH2)2 → [NH4]+[OCN]− → NH3 + HNCO

Heating above 160 °C yields biuret NH2CONHCONH2 and triuret NH2CONHCONHCONH2 via reaction with isocyanic acid:[17][16]

CO(NH2)2 + HNCO → NH2CONHCONH2
NH2CONHCONH2 + HNCO → NH2CONHCONHCONH2

At higher temperatures it converts to a range of condensation products, including cyanuric acid (CNOH)3, guanidine HNC(NH2)2, and melamine.[17][16]

Aqueous stability

edit

In aqueous solution, urea slowly equilibrates with ammonium cyanate. This elimination reaction[18] cogenerates isocyanic acid, which can carbamylate proteins, in particular the N-terminal amino group, the side chain amino of lysine, and to a lesser extent the side chains of arginine and cysteine.[19][20] Each carbamylation event adds 43 daltons to the mass of the protein, which can be observed in protein mass spectrometry.[20] For this reason, pure urea solutions should be freshly prepared and used, as aged solutions may develop a significant concentration of cyanate (20 mM in 8 M urea).[20] Dissolving urea in ultrapure water followed by removing ions (i.e. cyanate) with a mixed-bed ion-exchange resin and storing that solution at 4 °C is a recommended preparation procedure.[21] However, cyanate will build back up to significant levels within a few days.[20] Alternatively, adding 25–50 mM ammonium chloride to a concentrated urea solution decreases formation of cyanate because of the common ion effect.[20][22]

Analysis

edit

Urea is readily quantified by a number of different methods, such as the diacetyl monoxime colorimetric method, and the Berthelot reaction (after initial conversion of urea to ammonia via urease). These methods are amenable to high throughput instrumentation, such as automated flow injection analyzers[23] and 96-well micro-plate spectrophotometers.[24]

edit
Main article: ureas

Ureas describes a class of chemical compounds that share the same functional group, a carbonyl group attached to two organic amine residues: R1R2N−C(=O)−NR3R4, where R1, R2, R3 and R4 groups are hydrogen (–H), organyl or other groups. Examples include carbamide peroxide, allantoin, and hydantoin. Ureas are closely related to biurets and related in structure to amides, carbamates, carbodiimides, and thiocarbamides.

Uses

edit

Agriculture

edit
 
A plant in Bangladesh that produces urea fertilizer.

More than 90% of world industrial production of urea is destined for use as a nitrogen-release fertilizer.[17] Urea has the highest nitrogen content of all solid nitrogenous fertilizers in common use. Therefore, it has a low transportation cost per unit of nitrogen nutrient. The most common impurity of synthetic urea is biuret, which impairs plant growth. Urea breaks down in the soil to give ammonium ions (NH+4). The ammonium is taken up by the plant through its roots. In some soils, the ammonium is oxidized by bacteria to give nitrate (NO−3), which is also a nitrogen-rich plant nutrient. The loss of nitrogenous compounds to the atmosphere and runoff is wasteful and environmentally damaging so urea is sometimes modified to enhance the efficiency of its agricultural use. Techniques to make controlled-release fertilizers that slow the release of nitrogen include the encapsulation of urea in an inert sealant, and conversion of urea into derivatives such as urea-formaldehyde compounds, which degrade into ammonia at a pace matching plants' nutritional requirements.

Resins

edit

Urea is a raw material for the manufacture of formaldehyde based resins, such as UF, MUF, and MUPF, used mainly in wood-based panels, for instance, particleboard, fiberboard, OSB, and plywood.

Explosives

edit

Urea can be used in a reaction with nitric acid to make urea nitrate, a high explosive that is used industrially and as part of some improvised explosive devices.

Automobile systems

edit

Urea is used in Selective Non-Catalytic Reduction (SNCR) and Selective Catalytic Reduction (SCR) reactions to reduce the NOx pollutants in exhaust gases from combustion from diesel, dual fuel, and lean-burn natural gas engines. The BlueTec system, for example, injects a water-based urea solution into the exhaust system. Ammonia (NH3) produced by the hydrolysis of urea reacts with nitrogen oxides (NOx) and is converted into nitrogen gas (N2) and water within the catalytic converter. The conversion of noxious NOx to innocuous N2 is described by the following simplified global equation:[25]

4 NO + 4 NH3 + O2 → 4 N2 + 6 H2O

When urea is used, a pre-reaction (hydrolysis) occurs to first convert it to ammonia:

CO(NH2)2 + H2O → 2 NH3 + CO2

Being a solid highly soluble in water (545 g/L at 25 °C),[2] urea is much easier and safer to handle and store than the more irritant, caustic and hazardous ammonia (NH3), so it is the reactant of choice. Trucks and cars using these catalytic converters need to carry a supply of diesel exhaust fluid, also sold as AdBlue, a solution of urea in water.

Laboratory uses

edit

Urea in concentrations up to 10 M is a powerful protein denaturant as it disrupts the noncovalent bonds in the proteins. This property can be exploited to increase the solubility of some proteins. A mixture of urea and choline chloride is used as a deep eutectic solvent (DES), a substance similar to ionic liquid. When used in a deep eutectic solvent, urea gradually denatures the proteins that are solubilized.[26]

Urea in concentrations up to 8 M can be used to make fixed brain tissue transparent to visible light while still preserving fluorescent signals from labeled cells. This allows for much deeper imaging of neuronal processes than previously obtainable using conventional one photon or two photon confocal microscopes.[27]

Medical use

edit

Urea-containing creams are used as topical dermatological products to promote rehydration of the skin. Urea 40% is indicated for psoriasis, xerosis, onychomycosis, ichthyosis, eczema, keratosis, keratoderma, corns, and calluses. If covered by an occlusive dressing, 40% urea preparations may also be used for nonsurgical debridement of nails. Urea 40% "dissolves the intercellular matrix"[28][29] of the nail plate. Only diseased or dystrophic nails are removed, as there is no effect on healthy portions of the nail.[30] This drug (as carbamide peroxide) is also used as an earwax removal aid.[31]

Urea has also been studied as a diuretic. It was first used by Dr. W. Friedrich in 1892.[32] In a 2010 study of ICU patients, urea was used to treat euvolemic hyponatremia and was found safe, inexpensive, and simple.[33]

Like saline, urea has been injected into the uterus to induce abortion, although this method is no longer in widespread use.[34]

The blood urea nitrogen (BUN) test is a measure of the amount of nitrogen in the blood that comes from urea. It is used as a marker of renal function, though it is inferior to other markers such as creatinine because blood urea levels are influenced by other factors such as diet, dehydration,[35] and liver function.

Urea has also been studied as an excipient in Drug-coated Balloon (DCB) coating formulation to enhance local drug delivery to stenotic blood vessels.[36][37] Urea, when used as an excipient in small doses (~3 μg/mm2) to coat DCB surface was found to form crystals that increase drug transfer without adverse toxic effects on vascular endothelial cells.[38]

Urea labeled with carbon-14 or carbon-13 is used in the urea breath test, which is used to detect the presence of the bacterium Helicobacter pylori (H. pylori) in the stomach and duodenum of humans, associated with peptic ulcers. The test detects the characteristic enzyme urease, produced by H. pylori, by a reaction that produces ammonia from urea. This increases the pH (reduces the acidity) of the stomach environment around the bacteria. Similar bacteria species to H. pylori can be identified by the same test in animals such as apes, dogs, and cats (including big cats).

Miscellaneous uses

edit

Physiology

edit

Amino acids from ingested food (or produced from catabolism of muscle protein) that are used for the synthesis of proteins and other biological substances can be oxidized by the body as an alternative source of energy, yielding urea and carbon dioxide.[46] The oxidation pathway starts with the removal of the amino group by a transaminase; the amino group is then fed into the urea cycle. The first step in the conversion of amino acids into metabolic waste in the liver is removal of the alpha-amino nitrogen, which produces ammonia. Because ammonia is toxic, it is excreted immediately by fish, converted into uric acid by birds, and converted into urea by mammals.[47]

Ammonia (NH3) is a common byproduct of the metabolism of nitrogenous compounds. Ammonia is smaller, more volatile, and more mobile than urea. If allowed to accumulate, ammonia would raise the pH in cells to toxic levels. Therefore, many organisms convert ammonia to urea, even though this synthesis has a net energy cost. Being practically neutral and highly soluble in water, urea is a safe vehicle for the body to transport and excrete excess nitrogen.

Urea is synthesized in the body of many organisms as part of the urea cycle, either from the oxidation of amino acids or from ammonia. In this cycle, amino groups donated by ammonia and L-aspartate are converted to urea, while L-ornithine, citrulline, L-argininosuccinate, and L-arginine act as intermediates. Urea production occurs in the liver and is regulated by N-acetylglutamate. Urea is then dissolved into the blood (in the reference range of 2.5 to 6.7 mmol/L) and further transported and excreted by the kidney as a component of urine. In addition, a small amount of urea is excreted (along with sodium chloride and water) in sweat.

In water, the amine groups undergo slow displacement by water molecules, producing ammonia, ammonium ions, and bicarbonate ions. For this reason, old, stale urine has a stronger odor than fresh urine.

Humans

edit

The cycling of and excretion of urea by the kidneys is a vital part of mammalian metabolism. Besides its role as carrier of waste nitrogen, urea also plays a role in the countercurrent exchange system of the nephrons, that allows for reabsorption of water and critical ions from the excreted urine. Urea is reabsorbed in the inner medullary collecting ducts of the nephrons,[48] thus raising the osmolarity in the medullary interstitium surrounding the thin descending limb of the loop of Henle, which makes the water reabsorb.

By action of the urea transporter 2, some of this reabsorbed urea eventually flows back into the thin descending limb of the tubule,[49] through the collecting ducts, and into the excreted urine. The body uses this mechanism, which is controlled by the antidiuretic hormone, to create hyperosmotic urine — i.e., urine with a higher concentration of dissolved substances than the blood plasma. This mechanism is important to prevent the loss of water, maintain blood pressure, and maintain a suitable concentration of sodium ions in the blood plasma.

The equivalent nitrogen content (in grams) of urea (in mmol) can be estimated by the conversion factor 0.028 g/mmol.[50] Furthermore, 1 gram of nitrogen is roughly equivalent to 6.25 grams of protein, and 1 gram of protein is roughly equivalent to 5 grams of muscle tissue. In situations such as muscle wasting, 1 mmol of excessive urea in the urine (as measured by urine volume in litres multiplied by urea concentration in mmol/L) roughly corresponds to a muscle loss of 0.67 gram.

Other species

edit

In aquatic organisms the most common form of nitrogen waste is ammonia, whereas land-dwelling organisms convert the toxic ammonia to either urea or uric acid. Urea is found in the urine of mammals and amphibians, as well as some fish. Birds and saurian reptiles have a different form of nitrogen metabolism that requires less water, and leads to nitrogen excretion in the form of uric acid. Tadpoles excrete ammonia, but shift to urea production during metamorphosis. Despite the generalization above, the urea pathway has been documented not only in mammals and amphibians, but in many other organisms as well, including birds, invertebrates, insects, plants, yeast, fungi, and even microorganisms.[51]

Adverse effects

edit

Urea can be irritating to skin, eyes, and the respiratory tract. Repeated or prolonged contact with urea in fertilizer form on the skin may cause dermatitis.[52]

High concentrations in the blood can be damaging. Ingestion of low concentrations of urea, such as are found in typical human urine, are not dangerous with additional water ingestion within a reasonable time-frame. Many animals (e.g. camels, rodents or dogs) have a much more concentrated urine which may contain a higher urea amount than normal human urine.

Urea can cause algal blooms to produce toxins, and its presence in the runoff from fertilized land may play a role in the increase of toxic blooms.[53]

The substance decomposes on heating above melting point, producing toxic gases, and reacts violently with strong oxidants, nitrites, inorganic chlorides, chlorites and perchlorates, causing fire and explosion.[54]

History

edit

Urea was first discovered in urine in 1727 by the Dutch scientist Herman Boerhaave,[55] although this discovery is often attributed to the French chemist Hilaire Rouelle as well as William Cruickshank.[56]

Boerhaave used the following steps to isolate urea:[57][58]

  1. Boiled off water, resulting in a substance similar to fresh cream
  2. Used filter paper to squeeze out remaining liquid
  3. Waited a year for solid to form under an oily liquid
  4. Removed the oily liquid
  5. Dissolved the solid in water
  6. Used recrystallization to tease out the urea

In 1828, the German chemist Friedrich Wöhler obtained urea artificially by treating silver cyanate with ammonium chloride.[59][60][61]

AgNCO + [NH4]Cl → CO(NH2)2 + AgCl

This was the first time an organic compound was artificially synthesized from inorganic starting materials, without the involvement of living organisms. The results of this experiment implicitly discredited vitalism, the theory that the chemicals of living organisms are fundamentally different from those of inanimate matter. This insight was important for the development of organic chemistry. His discovery prompted Wöhler to write triumphantly to Jöns Jakob Berzelius:

"I must tell you that I can make urea without the use of kidneys, either man or dog. Ammonium cyanate is urea."

In fact, his second sentence was incorrect. Ammonium cyanate [NH4]+[OCN]− and urea CO(NH2)2 are two different chemicals with the same empirical formula CON2H4, which are in chemical equilibrium heavily favoring urea under standard conditions.[62] Regardless, with his discovery, Wöhler secured a place among the pioneers of organic chemistry.

Uremic frost was first described in 1865 by Harald Hirschsprung, the first Danish pediatrician in 1870 who also described the disease that carries his name in 1886. Uremic frost has become rare since the advent of dialysis. It is the classical pre-dialysis era description of crystallized urea deposits over the skin of patients with prolonged kidney failure and severe uremia.[63]

Historical preparation

edit

Urea was first noticed by Herman Boerhaave in the early 18th century from evaporates of urine. In 1773, Hilaire Rouelle obtained crystals containing urea from human urine by evaporating it and treating it with alcohol in successive filtrations.[64] This method was aided by Carl Wilhelm Scheele's discovery that urine treated by concentrated nitric acid precipitated crystals. Antoine François, comte de Fourcroy and Louis Nicolas Vauquelin discovered in 1799 that the nitrated crystals were identical to Rouelle's substance and invented the term "urea."[65][66] Berzelius made further improvements to its purification[67] and finally William Prout, in 1817, succeeded in obtaining and determining the chemical composition of the pure substance.[68] In the evolved procedure, urea was precipitated as urea nitrate by adding strong nitric acid to urine. To purify the resulting crystals, they were dissolved in boiling water with charcoal and filtered. After cooling, pure crystals of urea nitrate form. To reconstitute the urea from the nitrate, the crystals are dissolved in warm water, and barium carbonate added. The water is then evaporated and anhydrous alcohol added to extract the urea. This solution is drained off and evaporated, leaving pure urea.

Laboratory preparation

edit

Ureas in the more general sense can be accessed in the laboratory by reaction of phosgene with primary or secondary amines:

COCl2 + 4 RNH2 → (RNH)2CO + 2 [RNH3]+Cl−

These reactions proceed through an isocyanate intermediate. Non-symmetric ureas can be accessed by the reaction of primary or secondary amines with an isocyanate.

Urea can also be produced by heating ammonium cyanate to 60 °C.

[NH4]+[OCN]− → (NH2)2CO

Industrial production

edit

In 2020, worldwide production capacity was approximately 180 million tonnes.[69]

For use in industry, urea is produced from synthetic ammonia and carbon dioxide. As large quantities of carbon dioxide are produced during the ammonia manufacturing process as a byproduct of burning hydrocarbons to generate heat (predominantly natural gas, and less often petroleum derivatives or coal), urea production plants are almost always located adjacent to the site where the ammonia is manufactured.

Synthesis

edit
 
Urea plant using ammonium carbamate briquettes, Fixed Nitrogen Research Laboratory, ca. 1930

The basic process, patented in 1922, is called the Bosch–Meiser urea process after its discoverers Carl Bosch and Wilhelm Meiser.[70] The process consists of two main equilibrium reactions, with incomplete conversion of the reactants. The first is carbamate formation: the fast exothermic reaction of liquid ammonia with gaseous carbon dioxide (CO2) at high temperature and pressure to form ammonium carbamate ([NH4]+[NH2COO]−):[17]

2 NH3 + CO2 ⇌ NH4CO2NH2     (ΔH = −117 kJ/mol at 110 atm and 160 °C)[17][71]

The second is urea conversion: the slower endothermic decomposition of ammonium carbamate into urea and water:

NH4CO2NH2 ⇌ CO(NH2)2 + H2O     (ΔH = +15.5 kJ/mol at 160–180 °C)[17][71]

The overall conversion of NH3 and CO2 to urea is exothermic, with the reaction heat from the first reaction driving the second. The conditions that favor urea formation (high temperature) have an unfavorable effect on the carbamate formation equilibrium. The process conditions are a compromise: the ill-effect on the first reaction of the high temperature (around 190 °C) needed for the second is compensated for by conducting the process under high pressure (140–175 bar), which favors the first reaction. Although it is necessary to compress gaseous carbon dioxide to this pressure, the ammonia is available from the ammonia production plant in liquid form, which can be pumped into the system much more economically. To allow the slow urea formation reaction time to reach equilibrium, a large reaction space is needed, so the synthesis reactor in a large urea plant tends to be a massive pressure vessel.

Reactant recycling

edit

Because the urea conversion is incomplete, the urea must be separated from the unconverted reactants, including the ammonium carbamate. Various commercial urea processes are characterized by the conditions under which urea forms and the way that unconverted reactants are further processed.

Conventional recycle processes

edit

In early "straight-through" urea plants, reactant recovery (the first step in "recycling") was done by letting down the system pressure to atmospheric to let the carbamate decompose back to ammonia and carbon dioxide. Originally, because it was not economic to recompress the ammonia and carbon dioxide for recycle, the ammonia at least would be used for the manufacture of other products such as ammonium nitrate or ammonium sulfate, and the carbon dioxide was usually wasted. Later process schemes made recycling unused ammonia and carbon dioxide practical. This was accomplished by the "total recycle process", developed in the 1940s to 1960s and now called the "conventional recycle process". It proceeds by depressurizing the reaction solution in stages (first to 18–25 bar and then to 2–5 bar) and passing it at each stage through a steam-heated carbamate decomposer, then recombining the resulting carbon dioxide and ammonia in a falling-film carbamate condenser and pumping the carbamate solution back into the urea reaction vessel.[17]

Stripping recycle process

edit

The "conventional recycle process" for recovering and reusing the reactants has largely been supplanted by a stripping process, developed in the early 1960s by Stamicarbon in The Netherlands, that operates at or near the full pressure of the reaction vessel. It reduces the complexity of the multi-stage recycle scheme, and it reduces the amount of water recycled in the carbamate solution, which has an adverse effect on the equilibrium in the urea conversion reaction and thus on overall plant efficiency. Effectively all new urea plants use the stripper, and many total recycle urea plants have converted to a stripping process.[17][72]

In the conventional recycle processes, carbamate decomposition is promoted by reducing the overall pressure, which reduces the partial pressure of both ammonia and carbon dioxide, allowing these gasses to be separated from the urea product solution. The stripping process achieves a similar effect without lowering the overall pressure, by suppressing the partial pressure of just one of the reactants in order to promote carbamate decomposition. Instead of feeding carbon dioxide gas directly to the urea synthesis reactor with the ammonia, as in the conventional process, the stripping process first routes the carbon dioxide through the stripper. The stripper is a carbamate decomposer that provides a large amount of gas-liquid contact. This flushes out free ammonia, reducing its partial pressure over the liquid surface and carrying it directly to a carbamate condenser (also under full system pressure). From there, reconstituted ammonium carbamate liquor is passed to the urea production reactor. That eliminates the medium-pressure stage of the conventional recycle process.[17][72]

Side reactions

edit

The three main side reactions that produce impurities have in common that they decompose urea.

Urea hydrolyzes back to ammonium carbamate in the hottest stages of the synthesis plant, especially in the stripper, so residence times in these stages are designed to be short.[17]

Biuret is formed when two molecules of urea combine with the loss of a molecule of ammonia.

2 NH2CONH2 → NH2CONHCONH2 + NH3

Normally this reaction is suppressed in the synthesis reactor by maintaining an excess of ammonia, but after the stripper, it occurs until the temperature is reduced.[17] Biuret is undesirable in urea fertilizer because it is toxic to crop plants to varying degrees,[73] but it is sometimes desirable as a nitrogen source when used in animal feed.[74]

Isocyanic acid HNCO and ammonia NH3 results from the thermal decomposition of ammonium cyanate [NH4]+[OCN]−, which is in chemical equilibrium with urea:

CO(NH2)2 → [NH4]+[OCN]− → HNCO + NH3

This decomposition is at its worst when the urea solution is heated at low pressure, which happens when the solution is concentrated for prilling or granulation (see below). The reaction products mostly volatilize into the overhead vapours, and recombine when these condense to form urea again, which contaminates the process condensate.[17]

Corrosion

edit

Ammonium carbamate solutions are highly corrosive to metallic construction materials – even to resistant forms of stainless steel – especially in the hottest parts of the synthesis plant such as the stripper. Historically corrosion has been minimized (although not eliminated) by continuous injection of a small amount of oxygen (as air) into the plant to establish and maintain a passive oxide layer on exposed stainless steel surfaces. Highly corrosion resistant materials have been introduced to reduce the need for passivation oxygen, such as specialized duplex stainless steels in the 1990s, and zirconium or zirconium-clad titanium tubing in the 2000s.[17]

Finishing

edit

Urea can be produced in solid forms (prills, granules, pellets or crystals) or as solutions.

Solid forms

edit

For its main use as a fertilizer urea is mostly marketed in solid form, either as prills or granules. Prills are solidified droplets, whose production predates satisfactory urea granulation processes. Prills can be produced more cheaply than granules, but the limited size of prills (up to about 2.1 mm in diameter), their low crushing strength, and the caking or crushing of prills during bulk storage and handling make them inferior to granules. Granules are produced by acretion onto urea seed particles by spraying liquid urea in a succession of layers. Formaldehyde is added during the production of both prills and granules in order to increase crushing strength and suppress caking. Other shaping techniques such as pastillization (depositing uniform-sized liquid droplets onto a cooling conveyor belt) are also used.[17]

Liquid forms

edit

Solutions of urea and ammonium nitrate in water (UAN) are commonly used as a liquid fertilizer. In admixture, the combined solubility of ammonium nitrate and urea is so much higher than that of either component alone that it gives a stable solution with a total nitrogen content (32%) approaching that of solid ammonium nitrate (33.5%), though not, of course, that of urea itself (46%). UAN allows use of ammonium nitrate without the explosion hazard.[17] UAN accounts for 80% of the liquid fertilizers in the US.[75]

See also

edit

References

edit
  1. ^ a b Nomenclature of Organic Chemistry : IUPAC Recommendations and Preferred Names 2013 (Blue Book). Cambridge: The Royal Society of Chemistry. 2014. pp. 416, 860–861. doi:10.1039/9781849733069-FP001. ISBN 978-0-85404-182-4. The compound H2N-CO-NH2 has the retained name 'urea', which is the preferred IUPAC name, with locants N and N′, as shown above the structure below. The systematic name is 'carbonic diamide', (…).
  2. ^ a b Yalkowsky, Samuel H.; He, Yan; Jain, Parijat (19 April 2016). Handbook of Aqueous Solubility Data. CRC Press. ISBN 9781439802465.
  3. ^ "Solubility of Various Compounds in Glycerine" (PDF). msdssearch.dow.com. Archived from the original (PDF) on 13 April 2014. Retrieved 12 April 2014.
  4. ^ Loeser E, DelaCruz M, Madappalli V (9 June 2011). "Solubility of Urea in Acetonitrile–Water Mixtures and Liquid–Liquid Phase Separation of Urea-Saturated Acetonitrile–Water Mixtures". Journal of Chemical & Engineering Data. 56 (6): 2909–2913. doi:10.1021/je200122b.
  5. ^ a b Calculated from 14−pKa. The value of pKa is given as 0.10 by the CRC Handbook of Chemistry and Physics, 49th edition (1968–1969). A value of 0.18 is given by Williams, R. (24 October 2001). "pKa Data" (PDF). Archived from the original (PDF) on 24 August 2003.
  6. ^ "Carbamic acid".
  7. ^ "Urea - Registration Dossier - ECHA". echa.europa.eu.
  8. ^ Godfrey, Peter D.; Brown, Ronald D.; Hunter, Andrew N. (1997). "The shape of urea". Journal of Molecular Structure. 413–414: 405–414. Bibcode:1997JMoSt.413..405G. doi:10.1016/S0022-2860(97)00176-2.
  9. ^ a b Ishida, Tateki; Rossky, Peter J.; Castner, Edward W. (2004). "A Theoretical Investigation of the Shape and Hydration Properties of Aqueous Urea: Evidence for Nonplanar Urea Geometry". The Journal of Physical Chemistry B. 108 (45): 17583–17590. doi:10.1021/jp0473218. ISSN 1520-6106.
  10. ^ West, Aaron C.; Schmidt, Michael W.; Gordon, Mark S.; Ruedenberg, Klaus (15 October 2015). "A Comprehensive Analysis in Terms of Molecule-Intrinsic, Quasi-Atomic Orbitals. III. The Covalent Bonding Structure of Urea". The Journal of Physical Chemistry A. 119 (41): 10368–10375. Bibcode:2015JPCA..11910368W. doi:10.1021/acs.jpca.5b03400. ISSN 1089-5639. PMID 26371867.
  11. ^ Worsch, Detlev; Vögtle, Fritz (2002). "Separation of enantiomers by clathrate formation". Topics in Current Chemistry. Springer-Verlag. pp. 21–41. doi:10.1007/bfb0003835. ISBN 3-540-17307-2.
  12. ^ Kuz'mina, N.E.; Palkina, K.K.; Savinkina, E.V.; Kozlova, I.A. (2000). Zh. Neorg. Khim. (Russ. J. Inorganic Chemistry). 45: 395. {{cite journal}}: Missing or empty |title= (help)
  13. ^ IUPAC, Compendium of Chemical Terminology, 2nd ed. (the "Gold Book") (1997). Online corrected version: (2006–) "uronium salts". doi:10.1351/goldbook.U06580
  14. ^ Harkema, S.; Feil, D. (1 March 1969). "The crystal structure of urea nitrate" (PDF). Acta Crystallographica Section B Structural Crystallography and Crystal Chemistry. 25 (3): 589–591. Bibcode:1969AcCrB..25..589H. doi:10.1107/S0567740869002603. ISSN 0567-7408. Archived from the original (PDF) on 2 June 2024.
  15. ^ Béres, Kende Attila; Homonnay, Zoltán; Kótai, László (2024). "Hexakis(urea-O)iron Complex Salts as a Versatile Material Family: Overview of Their Properties and Applications". ACS Omega. 9 (10): 11148–11167. doi:10.1021/acsomega.3c09635. PMC 10938395. PMID 38496982.
  16. ^ a b c Schaber, Peter M.; Colson, James; Higgins, Steven; Thielen, Daniel; Anspach, Bill; Brauer, Jonathan (2004). "Thermal decomposition (pyrolysis) of urea in an open reaction vessel". Thermochimica Acta. 424 (1–2): 131–142. Bibcode:2004TcAc..424..131S. doi:10.1016/j.tca.2004.05.018. ISSN 0040-6031.
  17. ^ a b c d e f g h i j k l m n o Meessen, Jozef H. (2012). "Urea". Ullmann's Encyclopedia of Industrial Chemistry. Weinheim: Wiley-VCH. doi:10.1002/14356007.a27_333.pub2. ISBN 978-3527306732.
  18. ^ Alexandrova, Anastassia N.; Jorgensen, William L. (1 February 2007). "Why Urea Eliminates Ammonia Rather than Hydrolyzes in Aqueous Solution". The Journal of Physical Chemistry B. 111 (4): 720–730. doi:10.1021/jp066478s. PMC 2995377. PMID 17249815.
  19. ^ Aldrich, Sigma. "Urea Solution Product Information" (PDF). Retrieved 7 February 2023.
  20. ^ a b c d e Burgess, Richard R.; Deutscher, Murray P. (2009). Guide to protein purification. San Diego, Calif: Academic Press/Elsevier. p. 819. ISBN 978-0-12-374536-1. OCLC 463300660.
  21. ^ Deutscher, M.P. (1990). Guide to Protein Purification. Methods in enzymology. Academic Press. p. 267. ISBN 978-0-12-182083-1. Retrieved 24 February 2023.
  22. ^ Sun S, Zhou JY, Yang W, Zhang H (February 2014). "Inhibition of protein carbamylation in urea solution using ammonium-containing buffers". Analytical Biochemistry. 446: 76–81. doi:10.1016/j.ab.2013.10.024. PMC 4072244. PMID 24161613.
  23. ^ Baumgartner M, Flöck M, Winter P, Luf W, Baumgartner W (2005). "Evaluation of flow injection analysis for determination of urea in sheep's and cow's milk" (PDF). Acta Veterinaria Hungarica. 50 (3): 263–71. doi:10.1556/AVet.50.2002.3.2. PMID 12237967. S2CID 42485569.
  24. ^ Greenan NS, Mulvaney RL, Sims GK (1995). "A microscale method for colorimetric determination of urea in soil extracts". Communications in Soil Science and Plant Analysis. 26 (15–16): 2519–2529. Bibcode:1995CSSPA..26.2519G. doi:10.1080/00103629509369465.
  25. ^ Duo et al., (1992). Can. J. Chem. Eng, 70, 1014–1020.
  26. ^ Durand, Erwann; Lecomte, Jérôme; Baréa, Bruno; Piombo, Georges; Dubreucq, Éric; Villeneuve, Pierre (1 December 2012). "Evaluation of deep eutectic solvents as new media for Candida antarctica B lipase catalyzed reactions". Process Biochemistry. 47 (12). Elsevier: 2081–2089. doi:10.1016/j.procbio.2012.07.027. ISSN 1359-5113..
  27. ^ Hama H, Kurokawa H, Kawano H, Ando R, Shimogori T, Noda H, Fukami K, Sakaue-Sawano A, Miyawaki A (August 2011). "Scale: a chemical approach for fluorescence imaging and reconstruction of transparent mouse brain". Nature Neuroscience. 14 (11): 1481–8. doi:10.1038/nn.2928. PMID 21878933. S2CID 28281721.
  28. ^ "UriSec 40 How it Works". Odan Laboratories. January 2009. Archived from the original on 2 February 2011. Retrieved 15 February 2011.
  29. ^ "UriSec 40% Cream". Odan Laboratories. Retrieved 20 August 2021.
  30. ^ Habif, Thomas P. (25 November 2009). Clinical Dermatology E-Book. Elsevier Health Sciences. ISBN 978-0-323-08037-8.
  31. ^ "Carbamide Peroxide Drops GENERIC NAME(S): CARBAMIDE PEROXIDE". WebMD. Retrieved 19 August 2021.
  32. ^ Crawford JH, McIntosh JF (1925). "The use of urea as a diuretic in advanced heart failure". Archives of Internal Medicine. 36 (4). New York: 530–541. doi:10.1001/archinte.1925.00120160088004.
  33. ^ Decaux G, Andres C, Gankam Kengne F, Soupart A (14 October 2010). "Treatment of euvolemic hyponatremia in the intensive care unit by urea". Critical Care. 14 (5): R184. doi:10.1186/cc9292. PMC 3219290. PMID 20946646.
  34. ^ Diggory PL (January 1971). "Induction of therapeutic abortion by intra-amniotic injection of urea". British Medical Journal. 1 (5739): 28–9. doi:10.1136/bmj.1.5739.28. PMC 1794772. PMID 5539139.
  35. ^ Traynor J, Mactier R, Geddes CC, Fox JG (October 2006). "How to measure renal function in clinical practice". BMJ. 333 (7571): 733–7. doi:10.1136/bmj.38975.390370.7c. PMC 1592388. PMID 17023465.
  36. ^ Werk Michael; Albrecht Thomas; Meyer Dirk-Roelfs; Ahmed Mohammed Nabil; Behne Andrea; Dietz Ulrich; Eschenbach Götz; Hartmann Holger; Lange Christian (1 December 2012). "Paclitaxel-Coated Balloons Reduce Restenosis After Femoro-Popliteal Angioplasty". Circulation: Cardiovascular Interventions. 5 (6): 831–840. doi:10.1161/CIRCINTERVENTIONS.112.971630. PMID 23192918.
  37. ^ Wöhrle, Jochen (1 October 2012). "Drug-Coated Balloons for Coronary and Peripheral Interventional Procedures". Current Cardiology Reports. 14 (5): 635–641. doi:10.1007/s11886-012-0290-x. PMID 22825918. S2CID 8879713.
  38. ^ Kolachalama, Vijaya B.; Shazly, Tarek; Vipul C. Chitalia; Lyle, Chimera; Azar, Dara A.; Chang, Gary H. (2 May 2019). "Intrinsic coating morphology modulates acute drug transfer in drug-coated balloon therapy". Scientific Reports. 9 (1): 6839. Bibcode:2019NatSR...9.6839C. doi:10.1038/s41598-019-43095-9. PMC 6497887. PMID 31048704.
  39. ^ Heavy Duty Truck Systems. Cengage Learning. 2015. p. 1117. ISBN 9781305073623.
  40. ^ Chlorides—Advances in Research and Application: 2013 Edition. ScholarlyEditions. 2013. p. 77. ISBN 9781481674331.
  41. ^ "Lacura Multi Intensive Serum – Review – Excellent value for money – Lacura Multi Intensive Serum "Aqua complete"". Dooyoo.co.uk. 19 June 2009. Retrieved 28 December 2010.
  42. ^ Knollenberg, Robert G. (March 1966). "Urea as an Ice Nucleant for Supercooled Clouds". American Meteorological Society. 23 (2): 197. Bibcode:1966JAtS...23..197K. doi:10.1175/1520-0469(1966)023<0197:UAAINF>2.0.CO;2.
  43. ^ Burch, Paula E. (13 November 1999). "Dyeing FAQ: What is urea for, in dyeing? Is it necessary?". All About Hand Dyeing. Retrieved 24 August 2020.
  44. ^ "Optical parametric oscillator using urea crystal". Google Patents.
  45. ^ Donaldson, William R.; Tang, C. L. (1984). "Urea optical parametric oscillator". Applied Physics Letters. 44 (1). AIP Publishing: 25–27. Bibcode:1984ApPhL..44...25D. doi:10.1063/1.94590.
  46. ^ Sakami W, Harrington H (1963). "Amino acid metabolism". Annual Review of Biochemistry. 32 (1): 355–98. doi:10.1146/annurev.bi.32.070163.002035. PMID 14144484.
  47. ^ "Urea". Imperial College London. Retrieved 23 March 2015.
  48. ^ Walter F. Boron (2005). Medical Physiology: A Cellular And Molecular Approach. Elsevier/Saunders. ISBN 1-4160-2328-3. Page 837
  49. ^ Klein J, Blount MA, Sands JM (2011). "Urea Transport in the Kidney". Comprehensive Physiology. Vol. 1. pp. 699–729. doi:10.1002/cphy.c100030. ISBN 9780470650714. PMID 23737200.
  50. ^ Section 1.9.2 (page 76) in: Jacki Bishop; Thomas, Briony (2007). Manual of Dietetic Practice. Wiley-Blackwell. ISBN 978-1-4051-3525-2.
  51. ^ PubChem. "urea cycle". pubchem.ncbi.nlm.nih.gov. Retrieved 28 June 2021.
  52. ^ Schliemann, S.; Elsner, Peter (1 January 2007). Skin Protection: Practical Applications in the Occupational Setting. Karger Medical and Scientific Publishers. ISBN 978-3-8055-8218-6.
  53. ^ Coombs A (27 October 2008). "Urea pollution turns tides toxic". Nature. doi:10.1038/news.2008.1190. Retrieved 5 August 2018.
  54. ^ International Chemical Safety Cards: UREA. cdc.gov
  55. ^ Boerhaave called urea "sal nativus urinæ" (the native, i.e., natural, salt of urine). See:
    • The first mention of urea is as "the essential salt of the human body" in: Peter Shaw and Ephraim Chambers, A New Method of Chemistry …, vol 2, (London, England: J. Osborn and T. Longman, 1727), page 193: Process LXXXVII.
    • Boerhaave, Herman Elementa Chemicae …, volume 2, (Leipzig ("Lipsiae"), (Germany): Caspar Fritsch, 1732), page 276.
    • For an English translation of the relevant passage, see: Peter Shaw, A New Method of Chemistry …, 2nd ed., (London, England: T. Longman, 1741), page 198: Process CXVIII: The native salt of urine
    • Lindeboom, Gerrit A. Boerhaave and Great Britain …, (Leiden, Netherlands: E.J. Brill, 1974), page 51.
    • Backer, H. J. (1943) "Boerhaave's Ontdekking van het Ureum" (Boerhaave's discovery of urea), Nederlands Tijdschrift voor Geneeskunde (Dutch Journal of Medicine), 87 : 1274–1278 (in Dutch).
  56. ^ Kurzer F, Sanderson PM (1956). "Urea in the History of Organic Chemistry". Journal of Chemical Education. 33 (9): 452–459. Bibcode:1956JChEd..33..452K. doi:10.1021/ed033p452.
  57. ^ "Why Pee is Cool – entry #5 – "How Pee Unites You With Rocks"". Science minus details. 11 October 2011. Retrieved 9 August 2016.
  58. ^ Kurzer F, Sanderson PM (1956). "Urea in the History of Organic Chemistry". Journal of Chemical Education. 33 (9). p. 454. Bibcode:1956JChEd..33..452K. doi:10.1021/ed033p452.
  59. ^ Wöhler, Friedrich (1828) "Ueber künstliche Bildung des Harnstoffs" (On the artificial formation of urea), Annalen der Physik und Chemie, 88 (2) : 253–256. Available in English at Chem Team.
  60. ^ Nicolaou KC, Montagnon T (2008). Molecules That Changed The World. Wiley-VCH. p. 11. ISBN 978-3-527-30983-2.
  61. ^ Gibb BC (April 2009). "Teetering towards chaos and complexity". Nature Chemistry. 1 (1): 17–8. Bibcode:2009NatCh...1...17G. doi:10.1038/nchem.148. PMID 21378787.
  62. ^ Shorter, J. (1978). "The conversion of ammonium cyanate into urea—a saga in reaction mechanisms". Chemical Society Reviews. 7 (1): 1–14. doi:10.1039/CS9780700001.
  63. ^ "The discovery of urea and the end of vitalism - Hektoen International". hekint.org. 15 April 2024. Retrieved 17 April 2024.
  64. ^ Rouelle (1773) "Observations sur l'urine humaine, & sur celle de vache & de cheval, comparées ensemble" (Observations on human urine and on that of the cow and horse, compared to each other), Journal de Médecine, de Chirurgie et de Pharmacie, 40 : 451–468. Rouelle describes the procedure he used to separate urea from urine on pages 454–455.
  65. ^ Fourcroy and Vauquelin (1799) "Extrait d’un premier mémoire des cit. Fourcroy et Vaulquelin, pour servir à l’histoire naturelle, chimique et médicale de l’urine humaine, contenant quelques faits nouveaux sur son analyse et son altération spontanée" (Extract of a first memoir by citizens Fourcroy and Vauquelin, for use in the natural, chemical, and medical history of human urine, containing some new facts of its analysis and its spontaneous alteration), Annales de Chimie, 31 : 48–71. On page 69, urea is named "urée".
  66. ^ Fourcroy and Vauqeulin (1800) "Deuxième mémoire: Pour servir à l’histoire naturelle, chimique et médicale de l’urine humaine, dans lequel on s’occupe spécialement des propriétés de la matière particulière qui le caractérise," (Second memoir: For use in the natural, chemical and medical history of human urine, in which one deals specifically with the properties of the particular material that characterizes it), Annales de Chimie, 32 : 80–112; 113–162. On page 91, urea is again named "urée".
  67. ^ Rosenfeld L (1999). Four Centuries of Clinical Chemistry. CRC Press. pp. 41–. ISBN 978-90-5699-645-1.
  68. ^ Prout W (1817). "Observations on the nature of some of the proximate principles of the urine; with a few remarks upon the means of preventing those diseases, connected with a morbid state of that fluid". Medico-Chirurgical Transactions. 8: 526–549. doi:10.1177/095952871700800123. PMC 2128986. PMID 20895332.
  69. ^ "Urea production statistics". www.ifastat.org. International Fertilizer Association. Retrieved 19 April 2023.
  70. ^ US 1429483, Carl Bosch & Wilhelm Meiser, "Process of Manufacturing Urea", issued 1922-09-19, assigned to BASF 
  71. ^ a b Brouwer, Mark. "Thermodynamics of the Urea Process" (PDF). ureaknowhow.com. Retrieved 26 February 2023.
  72. ^ a b Meessen, Jozef (2014). "Urea synthesis". Chemie Ingenieur Technik. 86 (12). Wiley: 2180–2189. doi:10.1002/cite.201400064. ISSN 0009-286X.
  73. ^ Mikkelsen, R. L (1990). "Biuret in urea fertilizer". Fertilizer Research. 26 (1–3): 311–318. doi:10.1007/bf01048769. ISSN 0167-1731. S2CID 5970745.
  74. ^ Fonnesbeck, Paul V.; Kearl, Leonard C.; Harris, Lorin E. (1975). "Feed Grade Biuret as a Protein Replacement for Ruminants. A Review". Journal of Animal Science. 40 (6). Oxford University Press (OUP): 1150–1184. doi:10.2527/jas1975.4061150x. ISSN 0021-8812.
  75. ^ Ren, Baizhao; Guo, Yanqing; Liu, Peng; Zhao, Bin; Zhang, Jiwang (3 August 2021). "Effects of Urea-Ammonium Nitrate Solution on Yield, N2O Emission, and Nitrogen Efficiency of Summer Maize Under Integration of Water and Fertilizer". Frontiers in Plant Science. 12: 700331. doi:10.3389/fpls.2021.700331. ISSN 1664-462X. PMC 8369924. PMID 34413867.
edit
 
Wikimedia Commons has media related to Urea.
  • Urea in the Pesticide Properties DataBase (PPDB)
Retrieved from "https://en.wiki.x.io/w/index.php?title=Urea&oldid=1262627579"