Wikipedia

Body-on-frame

(Redirected from Ladder chassis)

Body-on-frame is a traditional motor vehicle construction method whereby a separate body or coach is mounted on a strong and relatively rigid vehicle frame or chassis that carries the powertrain (the engine and drivetrain) and to which the wheels and their suspension, brakes, and steering are mounted. Whereas this was the original method of building automobiles, body-on-frame construction is now used mainly for pickup trucks, large SUVs, and heavy trucks.

A ladder frame
A 2007 Toyota Tundra chassis holding the vehicle's engine, drivetrain, suspension and wheels.
The BMW i3 electric car is one of the rare modern passenger cars with a separate body and frame design (2013).

In the late 19th century, the frames, like those of the carriages they replaced, might be made of wood (commonly ash), reinforced by steel flitch plates, but in the early 20th century, steel ladder frames or chassis rapidly became standard. Mass production of all-metal bodies began with the Budd Company and the Dodge Brothers. All-metal bodies became common in the 1920s, except for Europe, which followed almost a decade later. Europe's custom-made or "coachbuilt" cars usually contained some wood framing or used aluminium alloy castings. Towards the beginning of international automobile assembly and construction, most manufacturers created rolling chassis consisting of a powertrain, suspension, steering column and a fuel tank that was then sent to a coachbuilder that added the body, interior and upholstery to the customers specific requests.

In contrast, unibody or monocoque designs, where panels within the body supported the car on its suspension, were developed by European manufacturers in the late 1920s with Budd USA (which had a number of large factories in Europe) and its technical knowhow. Because of the high cost of designing and developing these structures and the high cost of specialised machinery to make the large pressings required by this style of construction it is not used by low-volume manufacturers, who might construct an equivalent by welding steel tube to form a suitable space frame.

History

edit
 
A Model T chassis ready for its body
 
All steel chassis and all steel body
Body by Edward G Budd Manufacturing Company of Philadelphia for John and Horace Dodge[1]

The Ford Model T carried the tradition of body-on-frame over from horse-drawn buggies, helping to facilitate high volume manufacturing on a moving assembly line.[2] The use of steel ladder and X frame chassis allowed numerous vehicles to share a chassis and drivetrain while making changes to bodywork and interiors relatively easy, thus keeping costs down and minimizing design time. Over time the technology for unibody construction became economically feasible, assisted in recent decades by computer-aided design.[3] in addition, modern creature comforts, luxury and power-assisted features, and extensive safety reinforcement of vehicles have all added substantial weight, the ability to offset this with unibody construction has proven advantageous.

A handful of small passenger vehicles switched to unibody construction by the end of the 1930s. The trend had started with cars like the Citroën Traction Avant (1934) and Opel Olympia (a General Motors design) introduced in 1935, and the short-lived, aborted Chrysler Airflow. Trucks, bus manufacturers, and large low-volume cars or those made in the United States continued to use separate bodies on "conventional" frames. Body-on-frame remains the preferred construction method for heavy-duty commercial vehicles (especially those intended to carry or pull heavy loads, such as trucks and some sport utility vehicles (SUVs)) but as production volumes rise, increasing numbers of SUVs and crossover SUVs are switching to unibody frames. Mass-market manufacturers Ford, General Motors, and Chrysler are abandoning true body-on-frame SUVs, opting, when sales volume permits, for more efficient unibody construction.[4] Toyota currently manufactures the most body-on-frame SUVs with the 4Runner, Sequoia, Land Cruiser, Lexus GX, and Lexus LX, followed by Nissan with the Patrol, Armada, and Infiniti QX56/80.[5]

 
Austin A40 Sports, ca 1951. Jensen Motors (of West Bromwich) built the aluminium-on-ash bodies under contract and transported them to Austin's Longbridge plant for final assembly.[6]

Examples

edit
Main article: List of body-on-frame vehicles

The following is a list of SUVs and light-duty pickup trucks that have a body-on-frame construction.[as of?] The list is divided by vehicle category.

SUVs/wagons

edit

Mini SUV

edit

Mid-size SUV

edit

Full-size SUV

edit

Compact MPV

edit

Mid-size MPV

edit

Pickup trucks

edit

Mid-size pickup truck

edit

Full-size pickup truck

edit

See also

edit

References

edit
  1. ^ page 106, George A Oliver, A History of Coachbuilding, Cassell, London, 1962
  2. ^ Great Moments in Body-on-Frame Car Construction WSJ, May 2, 2014
  3. ^ Sawyer, Christopher A. (2009-06-02). "Framing the question | Automotive Design & Production | Find Articles at BNET". Findarticles.com. Archived from the original on 2009-02-11. Retrieved 2009-12-08.
  4. ^ "Car Reviews, New and Used Car Prices, Photos and Videos - MSN Autos". editorial.autos.msn.com. Archived from the original on 6 January 2014. Retrieved 10 April 2018.
  5. ^ "Toyota reaffirms commitment to body-on-frame SUVs". autoblog.com. Retrieved 10 April 2018.
  6. ^ "Austin A40 Sports". Austin Memories. Archived from the original on 2009-01-05.
edit
Retrieved from "https://en.wiki.x.io/w/index.php?title=Body-on-frame&oldid=1245147754"