Sodium polysulfide

(Redirected from Sodium polysulphide)

Sodium polysulfide is a general term for salts with the formula Na2Sx, where x = 2 to 5. The species Sx2−, called polysulfide anions, include disulfide (S22−), trisulfide (S32−), tetrasulfide (S42−), and pentasulfide (S52−). In principle, but not in practice, the chain lengths could be longer.[1][2] The salts are dark red solids that dissolve in water to give highly alkaline and corrosive solutions. In air, these salts oxidize, and they evolve hydrogen sulfide by hydrolysis.

Sodium polysulfide

Sodium pentasulfide, a representative component of sodium polysulfide
Names
Other names
Sodium sulfane; Viradon
Identifiers
3D model (JSmol)
ChemSpider
ECHA InfoCard 100.014.261 Edit this at Wikidata
EC Number
  • 215-686-9
UN number UN3266
  • tetrasulfide: [Na+].[Na+].[S-]SS[S-]
  • pentasulfide: [Na+].[Na+].[S-]SSS[S-]
Properties
Na2Sx
Hazards
GHS labelling:
GHS02: FlammableGHS05: CorrosiveGHS06: ToxicGHS09: Environmental hazard
Danger
H228, H301, H311, H314, H400
P210, P240, P241, P260, P264, P270, P273, P280, P301+P310, P301+P330+P331, P302+P352, P303+P361+P353, P304+P340, P305+P351+P338, P310, P312, P321, P322, P330, P361, P363, P370+P378, P391, P405, P501
NFPA 704 (fire diamond)
NFPA 704 four-colored diamondHealth 3: Short exposure could cause serious temporary or residual injury. E.g. chlorine gasFlammability 0: Will not burn. E.g. waterInstability 1: Normally stable, but can become unstable at elevated temperatures and pressures. E.g. calciumSpecial hazards (white): no code
3
0
1
Flash point Non-combustible
Safety data sheet (SDS) AGFA
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).

Structure

edit

The polysulfide anions form chains with S---S bond distances around 2 Å in length. The chains adopt skewed conformations. In the solid state, these salts are dense solids with strong association of the sodium cations with the anionic termini of the chains.[3]

 
S42− from the crystal structure, highlighting its skewed conformation.
 
S52− from the crystal structure, highlighting its skewed conformation.

Production and occurrence

edit

Sodium polysulfide can be produced by dissolving sulfur in a solution of sodium sulfide.[4] Alternatively they are produced by the redox reaction of aqueous sodium hydroxide with sulfur at elevated temperatures.[5] Finally they arise by the reduction of elemental sulfur with sodium, a reaction often conducted in anhydrous ammonia.

These salts are used in the production of polysulfide polymers, as a chemical fungicide, as a blackening agent on copper jewellery, as a component in a polysulfide bromide battery, as a toner in a photochemical solution, and in the tanning industry to remove hair from hides.

Reactions

edit

As exploited in the sodium-sulfur battery, the polysulfides absorb and release reducing equivalents by breaking and making S-S bonds, respectively. An idealized reaction for sodium tetrasulfide is shown:

Na2S4 + 2 Na ⇌ 2 Na2S2

Alkylation gives organic polysulfides according to the following idealized equation:

Na2S4 + 2 RX → 2 NaX + R2S4

Alkylation with an organic dihalide gives polymers called thiokols.

Protonation of these salts gives hydrogen sulfide and elemental sulfur, as illustrated by the reaction of sodium pentasulfide:

Na2S5 + 2 HCl → H2S + 4 S + 2 NaCl

References

edit
  1. ^ Steudel, Ralf (2003-10-23). Elemental Sulfur and Sulfur-Rich Compounds I. Berlin Heidelberg: Springer Science & Business Media. ISBN 978-3-540-40191-9.
  2. ^ Steudel, Ralf (2003-11-17). Elemental Sulfur and Sulfur-Rich Compounds II. Berlin Heidelberg: Springer Science & Business Media. ISBN 978-3-540-40378-4.
  3. ^ Rosén, E.; Tegman, R. (1988). "Preparative and X - ray powder diffraction study of the polysulfides Na2S2, Na2S4 and Na2S5". Acta Chemica Scandinavica. 25: 3329–3336. doi:10.3891/acta.chem.scand.25-3329.
  4. ^ F. Fehér" Sodium Disulfide", "Sodium Tetrasulfide" "Sodium Pentasulfide" in Handbook of Preparative Inorganic Chemistry, 2nd Ed. Edited by G. Brauer, Academic Press, 1963, NY. Vol. 1. p. 361-367.
  5. ^ Lee, T.C.P. (1999). Properties and applications of elastomeric polysulfides. Rapra Technology. p. 4. ISBN 978-1859571583.