Puiseux series

(Redirected from Puiseux's theorem)

In mathematics, Puiseux series are a generalization of power series that allow for negative and fractional exponents of the indeterminate. For example, the series

Truncated Puiseux expansions for the cubic curve y^2 = x^3 + x^2
Truncated Puiseux expansions for the cubic curve at the double point . Darker colors indicate more terms.

is a Puiseux series in the indeterminate x. Puiseux series were first introduced by Isaac Newton in 1676[1] and rediscovered by Victor Puiseux in 1850.[2]

The definition of a Puiseux series includes that the denominators of the exponents must be bounded. So, by reducing exponents to a common denominator n, a Puiseux series becomes a Laurent series in an nth root of the indeterminate. For example, the example above is a Laurent series in Because a complex number has n nth roots, a convergent Puiseux series typically defines n functions in a neighborhood of 0.

Puiseux's theorem, sometimes also called the Newton–Puiseux theorem, asserts that, given a polynomial equation with complex coefficients, its solutions in y, viewed as functions of x, may be expanded as Puiseux series in x that are convergent in some neighbourhood of 0. In other words, every branch of an algebraic curve may be locally described by a Puiseux series in x (or in xx0 when considering branches above a neighborhood of x0 ≠ 0).

Using modern terminology, Puiseux's theorem asserts that the set of Puiseux series over an algebraically closed field of characteristic 0 is itself an algebraically closed field, called the field of Puiseux series. It is the algebraic closure of the field of formal Laurent series, which itself is the field of fractions of the ring of formal power series.

Definition

edit

If K is a field (such as the complex numbers), a Puiseux series with coefficients in K is an expression of the form

 

where   is a positive integer and   is an integer. In other words, Puiseux series differ from Laurent series in that they allow for fractional exponents of the indeterminate, as long as these fractional exponents have bounded denominator (here n). Just as with Laurent series, Puiseux series allow for negative exponents of the indeterminate as long as these negative exponents are bounded below (here by  ). Addition and multiplication are as expected: for example,

 

and

 

One might define them by first "upgrading" the denominator of the exponents to some common denominator N and then performing the operation in the corresponding field of formal Laurent series of  .

The Puiseux series with coefficients in K form a field, which is the union

 

of fields of formal Laurent series in   (considered as an indeterminate).

This yields an alternative definition of the field of Puiseux series in terms of a direct limit. For every positive integer n, let   be an indeterminate (meant to represent  ), and   be the field of formal Laurent series in   If m divides n, the mapping   induces a field homomorphism   and these homomorphisms form a direct system that has the field of Puiseux series as a direct limit. The fact that every field homomorphism is injective shows that this direct limit can be identified with the above union, and that the two definitions are equivalent (up to an isomorphism).

Valuation

edit

A nonzero Puiseux series   can be uniquely written as

 

with   The valuation

 

of   is the smallest exponent for the natural order of the rational numbers, and the corresponding coefficient   is called the initial coefficient or valuation coefficient of  . The valuation of the zero series is  

The function v is a valuation and makes the Puiseux series a valued field, with the additive group   of the rational numbers as its valuation group.

As for every valued fields, the valuation defines a ultrametric distance by the formula   For this distance, the field of Puiseux series is a metric space. The notation

 

expresses that a Puiseux is the limit of its partial sums. However, the field of Puiseux series is not complete; see below § Levi–Civita field.

Convergent Puiseux series

edit

Puiseux series provided by Newton–Puiseux theorem are convergent in the sense that there is a neighborhood of zero in which they are convergent (0 excluded if the valuation is negative). More precisely, let

 

be a Puiseux series with complex coefficients. There is a real number r, called the radius of convergence such that the series converges if T is substituted for a nonzero complex number t of absolute value less than r, and r is the largest number with this property. A Puiseux series is convergent if it has a nonzero radius of convergence.

Because a nonzero complex number has n nth roots, some care must be taken for the substitution: a specific nth root of t, say x, must be chosen. Then the substitution consists of replacing   by   for every k.

The existence of the radius of convergence results from the similar existence for a power series, applied to   considered as a power series in  

It is a part of Newton–Puiseux theorem that the provided Puiseux series have a positive radius of convergence, and thus define a (multivalued) analytic function in some neighborhood of zero (zero itself possibly excluded).

Valuation and order on coefficients

edit

If the base field   is ordered, then the field of Puiseux series over   is also naturally (“lexicographically”) ordered as follows: a non-zero Puiseux series   with 0 is declared positive whenever its valuation coefficient is so. Essentially, this means that any positive rational power of the indeterminate   is made positive, but smaller than any positive element in the base field  .

If the base field   is endowed with a valuation  , then we can construct a different valuation on the field of Puiseux series over   by letting the valuation   be   where   is the previously defined valuation (  is the first non-zero coefficient) and   is infinitely large (in other words, the value group of   is   ordered lexicographically, where   is the value group of  ). Essentially, this means that the previously defined valuation   is corrected by an infinitesimal amount to take into account the valuation   given on the base field.

Newton–Puiseux theorem

edit

As early as 1671,[3] Isaac Newton implicitly used Puiseux series and proved the following theorem for approximating with series the roots of algebraic equations whose coefficients are functions that are themselves approximated with series or polynomials. For this purpose, he introduced the Newton polygon, which remains a fundamental tool in this context. Newton worked with truncated series, and it is only in 1850 that Victor Puiseux[2] introduced the concept of (non-truncated) Puiseux series and proved the theorem that is now known as Puiseux's theorem or Newton–Puiseux theorem.[4] The theorem asserts that, given an algebraic equation whose coefficients are polynomials or, more generally, Puiseux series over a field of characteristic zero, every solution of the equation can be expressed as a Puiseux series. Moreover, the proof provides an algorithm for computing these Puiseux series, and, when working over the complex numbers, the resulting series are convergent.

In modern terminology, the theorem can be restated as: the field of Puiseux series over an algebraically closed field of characteristic zero, and the field of convergent Puiseux series over the complex numbers, are both algebraically closed.

Newton polygon

edit

Let

 

be a polynomial whose nonzero coefficients   are polynomials, power series, or even Puiseux series in x. In this section, the valuation   of   is the lowest exponent of x in   (Most of what follows applies more generally to coefficients in any valued ring.)

For computing the Puiseux series that are roots of P (that is solutions of the functional equation  ), the first thing to do is to compute the valuation of the roots. This is the role of the Newton polygon.

Let consider, in a Cartesian plane, the points of coordinates   The Newton polygon of P is the lower convex hull of these points. That is, the edges of the Newton polygon are the line segments joigning two of these points, such that all these points are not below the line supporting the segment (below is, as usually, relative to the value of the second coordinate).

Given a Puiseux series   of valuation  , the valuation of   is at least the minimum of the numbers   and is equal to this minimum if this minimum is reached for only one i. So, for   being a root of P, the minimum must be reached at least twice. That is, there must be two values   and   of i such that   and   for every i.

That is,   and   must belong to an edge of the Newton polygon, and   must be the opposite of the slope of this edge. This is a rational number as soon as all valuations   are rational numbers, and this is the reason for introducing rational exponents in Puiseux series.

In summary, the valuation of a root of P must be the opposite of a slope of an edge of the Newton polynomial.

The initial coefficient of a Puiseux series solution of   can easily be deduced. Let   be the initial coefficient of   that is, the coefficient of   in   Let   be a slope of the Newton polygon, and   be the initial term of a corresponding Puiseux series solution of   If no cancellation would occur, then the initial coefficient of   would be   where I is the set of the indices i such that   belongs to the edge of slope   of the Newton polygon. So, for having a root, the initial coefficient   must be a nonzero root of the polynomial   (this notation will be used in the next section).

In summary, the Newton polynomial allows an easy computation of all possible initial terms of Puiseux series that are solutions of  

The proof of Newton–Puiseux theorem will consist of starting from these initial terms for computing recursively the next terms of the Puiseux series solutions.

Constructive proof

edit

Let suppose that the first term   of a Puiseux series solution of   has been be computed by the method of the preceding section. It remains to compute   For this, we set   and write the Taylor expansion of P at  

 

This is a polynomial in z whose coefficients are Puiseux series in x. One may apply to it the method of the Newton polygon, and iterate for getting the terms of the Puiseux series, one after the other. But some care is required for insuring that   and showing that one get a Puiseux series, that is, that the denominators of the exponents of x remain bounded.

The derivation with respect to y does not change the valuation in x of the coefficients; that is,

 

and the equality occurs if and only if   where   is the polynomial of the preceding section. If m is the multiplicity of   as a root of   it results that the inequality is an equality for   The terms such that   can be forgotten as far as one is concerned by valuations, as   and   imply

 

This means that, for iterating the method of Newton polygon, one can and one must consider only the part of the Newton polygon whose first coordinates belongs to the interval   Two cases have to be considered separately and will be the subject of next subsections, the so-called ramified case, where m > 1, and the regular case where m = 1.

Ramified case

edit

The way of applying recursively the method of the Newton polygon has been described precedingly. As each application of the method may increase, in the ramified case, the denominators of exponents (valuations), it remains to prove that one reaches the regular case after a finite number of iterations (otherwise the denominators of the exponents of the resulting series would not be bounded, and this series would not be a Puiseux series. By the way, it will also be proved that one gets exactly as many Puiseux series solutions as expected, that is the degree of   in y.

Without loss of generality, one can suppose that   that is,   Indeed, each factor y of   provides a solution that is the zero Puiseux series, and such factors can be factored out.

As the characteristic is supposed to be zero, one can also suppose that   is a square-free polynomial, that is that the solutions of   are all different. Indeed, the square-free factorization uses only the operations of the field of coefficients for factoring   into square-free factors than can be solved separately. (The hypothesis of characteristic zero is needed, since, in characteristic p, the square-free decomposition can provide irreducible factors, such as   that have multiple roots over an algebraic extension.)

In this context, one defines the length of an edge of a Newton polygon as the difference of the abscissas of its end points. The length of a polygon is the sum of the lengths of its edges. With the hypothesis   the length of the Newton polygon of P is its degree in y, that is the number of its roots. The length of an edge of the Newton polygon is the number of roots of a given valuation. This number equals the degree of the previously defined polynomial  

The ramified case corresponds thus to two (or more) solutions that have the same initial term(s). As these solutions must be distinct (square-free hypothesis), they must be distinguished after a finite number of iterations. That is, one gets eventually a polynomial   that is square free, and the computation can continue as in the regular case for each root of  

As the iteration of the regular case does not increase the denominators of the exponents, This shows that the method provides all solutions as Puiseux series, that is, that the field of Puiseux series over the complex numbers is an algebraically closed field that contains the univariate polynomial ring with complex coefficients.

Failure in positive characteristic

edit

The Newton–Puiseux theorem is not valid over fields of positive characteristic. For example, the equation   has solutions

 

and

 

(one readily checks on the first few terms that the sum and product of these two series are 1 and   respectively; this is valid whenever the base field K has characteristic different from 2).

As the powers of 2 in the denominators of the coefficients of the previous example might lead one to believe, the statement of the theorem is not true in positive characteristic. The example of the Artin–Schreier equation   shows this: reasoning with valuations shows that X should have valuation  , and if we rewrite it as   then

 

and one shows similarly that   should have valuation  , and proceeding in that way one obtains the series

 

since this series makes no sense as a Puiseux series—because the exponents have unbounded denominators—the original equation has no solution. However, such Eisenstein equations are essentially the only ones not to have a solution, because, if   is algebraically closed of characteristic  , then the field of Puiseux series over   is the perfect closure of the maximal tamely ramified extension of  .[4]

Similarly to the case of algebraic closure, there is an analogous theorem for real closure: if   is a real closed field, then the field of Puiseux series over   is the real closure of the field of formal Laurent series over  .[5] (This implies the former theorem since any algebraically closed field of characteristic zero is the unique quadratic extension of some real-closed field.)

There is also an analogous result for p-adic closure: if   is a  -adically closed field with respect to a valuation  , then the field of Puiseux series over   is also  -adically closed.[6]

Puiseux expansion of algebraic curves and functions

edit

Algebraic curves

edit

Let   be an algebraic curve[7] given by an affine equation   over an algebraically closed field   of characteristic zero, and consider a point   on   which we can assume to be  . We also assume that   is not the coordinate axis  . Then a Puiseux expansion of (the   coordinate of)   at   is a Puiseux series   having positive valuation such that  .

More precisely, let us define the branches of   at   to be the points   of the normalization   of   which map to  . For each such  , there is a local coordinate   of   at   (which is a smooth point) such that the coordinates   and   can be expressed as formal power series of  , say   (since   is algebraically closed, we can assume the valuation coefficient to be 1) and  : then there is a unique Puiseux series of the form   (a power series in  ), such that   (the latter expression is meaningful since   is a well-defined power series in  ). This is a Puiseux expansion of   at   which is said to be associated to the branch given by   (or simply, the Puiseux expansion of that branch of  ), and each Puiseux expansion of   at   is given in this manner for a unique branch of   at  .[8][9]

This existence of a formal parametrization of the branches of an algebraic curve or function is also referred to as Puiseux's theorem: it has arguably the same mathematical content as the fact that the field of Puiseux series is algebraically closed and is a historically more accurate description of the original author's statement.[10]

For example, the curve   (whose normalization is a line with coordinate   and map  ) has two branches at the double point (0,0), corresponding to the points   and   on the normalization, whose Puiseux expansions are   and   respectively (here, both are power series because the   coordinate is étale at the corresponding points in the normalization). At the smooth point   (which is   in the normalization), it has a single branch, given by the Puiseux expansion   (the   coordinate ramifies at this point, so it is not a power series).

The curve   (whose normalization is again a line with coordinate   and map  ), on the other hand, has a single branch at the cusp point  , whose Puiseux expansion is  .

Analytic convergence

edit

When   is the field of complex numbers, the Puiseux expansion of an algebraic curve (as defined above) is convergent in the sense that for a given choice of  -th root of  , they converge for small enough  , hence define an analytic parametrization of each branch of   in the neighborhood of   (more precisely, the parametrization is by the  -th root of  ).

Generalizations

edit

Levi-Civita field

edit

The field of Puiseux series is not complete as a metric space. Its completion, called the Levi-Civita field, can be described as follows: it is the field of formal expressions of the form   where the support of the coefficients (that is, the set of e such that  ) is the range of an increasing sequence of rational numbers that either is finite or tends to  . In other words, such series admit exponents of unbounded denominators, provided there are finitely many terms of exponent less than   for any given bound  . For example,   is not a Puiseux series, but it is the limit of a Cauchy sequence of Puiseux series; in particular, it is the limit of   as  . However, even this completion is still not "maximally complete" in the sense that it admits non-trivial extensions which are valued fields having the same value group and residue field,[11][12] hence the opportunity of completing it even more.

Hahn series

edit

Hahn series are a further (larger) generalization of Puiseux series, introduced by Hans Hahn in the course of the proof of his embedding theorem in 1907 and then studied by him in his approach to Hilbert's seventeenth problem. In a Hahn series, instead of requiring the exponents to have bounded denominator they are required to form a well-ordered subset of the value group (usually   or  ). These were later further generalized by Anatoly Maltsev and Bernhard Neumann to a non-commutative setting (they are therefore sometimes known as Hahn–Mal'cev–Neumann series). Using Hahn series, it is possible to give a description of the algebraic closure of the field of power series in positive characteristic which is somewhat analogous to the field of Puiseux series.[13]

Notes

edit
  1. ^ Newton (1960)
  2. ^ a b Puiseux (1850, 1851)
  3. ^ Newton (1736)
  4. ^ a b cf. Kedlaya (2001), introduction
  5. ^ Basu &al (2006), chapter 2 ("Real Closed Fields"), theorem 2.91 (p. 75)
  6. ^ Cherlin (1976), chapter 2 ("The Ax–Kochen–Ershof Transfer Principle"), §7 ("Puiseux series fields")
  7. ^ We assume that   is irreducible or, at least, that it is reduced and that it does not contain the   coordinate axis.
  8. ^ Shafarevich (1994), II.5, pp. 133–135
  9. ^ Cutkosky (2004), chapter 2, pp. 3–11
  10. ^ Puiseux (1850), p. 397
  11. ^ Poonen, Bjorn (1993). "Maximally complete fields". Enseign. Math. 39: 87–106.
  12. ^ Kaplansky, Irving (1942). "Maximal Fields with Valuations". Duke Math. J. 9 (2): 303–321. doi:10.1215/s0012-7094-42-00922-0.
  13. ^ Kedlaya (2001)

See also

edit

References

edit
edit