Pennsylvania Railroad locomotive classification
Locomotive classification on the Pennsylvania Railroad took several forms. Early on, steam locomotives were given single-letter classes. As the 26 letters were quickly assigned, that scheme was abandoned for a more complex system.[1] This was used for all of the PRR's steam locomotives, and — with the exception of the final type bought (the E44) — all electric locomotives also used this scheme.
![](http://up.wiki.x.io/wikipedia/commons/thumb/7/74/PRR_5898_Herald_Corning%2C_NY_on_October_9%2C_1987_%2822220309423%29.jpg/220px-PRR_5898_Herald_Corning%2C_NY_on_October_9%2C_1987_%2822220309423%29.jpg)
PRR steam and electric classification
editA: 0-4-0
editClass A was the 0-4-0 type, an arrangement best suited to small switcher locomotives (known as "shifters" in PRR parlance). Most railroads abandoned the 0-4-0 after the 1920s, but the PRR kept it for use on small industrial branches, especially those with street trackage and tight turns.
B: 0-6-0
editClass B comprised the 0-6-0 type, the most popular arrangement for switcher locomotives on the PRR.
- B1
- B2
- B3
- B4
- B5 - Rebuilt from class H1 and H2a 2-8-0
- B6
- B7 - Some rebuilt from class H3, H3a, and H3b 2-8-0
- B8
- B21
- B22
- B23
- B28s
- B29
C: 0-8-0
editClass C was assigned to the 0-8-0 type. These were very common on other railroads, but the PRR was not keen on them and only built a few. This was partly because the PRR used 2-8-0 "Consolidation" types for similar service.
D: 4-4-0
editClass D was the 4-4-0 "American" type, the most common arrangement in 19th Century American railroading. 4-4-0s stayed in service on the PRR in secondary work later than on most other railroads, and three were in use until after World War II
- D1
- D2
- D3
- D4
- D5
- D6
- D7
- D8
- D9
- D10
- D11
- D12
- D13
- D14
- D15 - Compound
- D16
- D21 - ex-Vandalia Railroad, built by Baldwin 1871-1873
- D22 - ex-Vandalia Railroad, built by Pittsburgh 1883-1889
- D23 - ex-Vandalia Railroad, built by Pittsburgh 1884
- D24 - ex-Vandalia Railroad, built by Rogers 1887
- D25 - ex-Vandalia Railroad, built by Pittsburgh 1890
- D26 - ex-Vandalia Railroad, built by Schenectady 1895-1899
- D30 - ex-Toledo, Walhonding Valley and Ohio Railroad, built by Rome 1890
- D31 - ex-Toledo, Walhonding Valley and Ohio Railroad, built 1892-1895
- D32 - Compound, ex-Toledo, Walhonding Valley and Ohio Railroad, built by Baldwin 1892
- D33
- D34 - ex-Cleveland and Marietta Railroad, built by Rome 1885
- D35 - ex-Cleveland and Marietta Railroad, built by Rome 1885
- D36 - ex-Cleveland and Marietta Railroad, built by Rogers 1885-1886
- D37 - ex-Cincinnati, Lebanon and Northern Railway, built by Baldwin 1894
- D38 - ex-Cincinnati, Lebanon and Northern Railway, built by Pittsburgh 1899
- D39 - ex-Grand Rapids and Indiana Railroad, built by Baldwin 1892-1893
- D61 - ex-Cleveland, Akron and Columbus Railway, built by Baldwin 1893
- "Odd D" #10003, an experimental electric locomotive.
E: 4-4-2
editThe 4-4-2 "Atlantic" type was assigned class E. The PRR was an enthusiastic user of the Atlantic type in flatter country, and built some of the most advanced Atlantics used in the United States.
- E1
- E2
- E3
- E4
- E5
- E6
- E7
- E21
- E22
- E23
- E28 - Compound
- E29 - Compound
- "de Glehn" #2512, a single experimental compound locomotive
F: 2-6-0
editThe 2-6-0 "Mogul" type was assigned class F. On the PRR, this type was used during the period of 1895–1925, approximately. They were mostly used to haul express freight, although some hauled suburban passenger trains.
G: 4-6-0
edit- G1
- G2
- G3
- G4
- G5 - Largest 10 wheeler built. PRR constructed 90 for use in commuter service and then built 30 for their subsidiary the Long Island RR.
- G53 - Owned By subsidiary Long Island RR
H: 2-8-0
editI: 2-10-0
editThe 2-10-0 "Decapod" type was assigned class I. The PRR only owned one type of Decapod, class I1s, but they owned 598 of them, one of the largest classes of identical power in the United States.
- I1s - heavy freight hauler.
J: 2-6-2 and 2-10-4
editClass J was first used for two experimental 2-6-2 "Prairie" locomotives built by ALCO in 1905. These were both withdrawn from service by the mid-1920s. In 1942, the PRR built 123 2-10-4 "Texas" type locomotives based on C&O plans; class J now being unoccupied, it was reused for them. The PRR J1 was an improved version of its C&O counterpart with more pulling power.
K: 4-6-2
editThe PRR assigned class K to the 4-6-2 "Pacific" type. The Pacific was the most common type of passenger locomotive on the Pennsylvania.
- K2 - 153 built at Altoona 1910-1911
- K3s - 30 built by Baldwin in 1913.
- K4s - 425 built by the PRR and Baldwin 1914-1928.
- K5 - 2 prototypes built
L: 2-8-2
editClass L was assigned to the 2-8-2 "Mikado" type.
- L1s - freight twin to the famed K4s Pacific (575 built)
- L2s - the USRA standard light Mikado (5 built for PRR).
- L5 - PRR 2nd generation DC electric locomotive.
- L6 - PRR freight AC electric locomotives.
M: 4-8-2
edit- M1 - mixed-traffic Mountain type, latterly mostly used on fast freight.
N: 2-10-2
editO: 4-4-4
editThe 4-4-4 arrangement was rare anywhere, and on the PRR it was found only on eight experimental electric locomotives.
- O1 - experimental electric locomotives.
P: 4-6-4
editThe 4-6-4 arrangement was seen on the PRR only on electric locomotives. As a steam locomotive arrangement, it was poorly suited to the PRR's mountainous terrain, wasting much potential adhesive weight on non-driven wheels. That it was so widely used by the rival New York Central would also likely have factored against PRR adoption.
Q: 4-4-6-4 or 4-6-4-4
editThe Q class comprised what were effectively 4-10-4s with the driving axles split into two driven groups. The Q2 was the most powerful non-articulated steam locomotive ever built and also holds the record for highest horsepower recorded by any steam locomotive at 7,987 hp.
R: 4-8-4
editThe PRR never built any steam locomotives of the 4-8-4 "Northern" type, although the T1 duplexes were effectively a "Northern" with the driving wheels split into two groups.
S: 6-4-4-6 or 6-8-6
editBoth S class locomotives were originally intended to only have four leading and trailing wheels, but for the S1 increases in weight required an additional axle at each end. In the case of the S2, it was due to wartime limits on the use of advanced steel alloys.
- S1 - experimental duplex express passenger locomotive.
- S2 - experimental steam turbine locomotive.
T: 4-4-4-4
editThe duplex-drive T1 was the final class of steam locomotive constructed for the Pennsylvania Railroad, and possibly the most controversial.
Compound classifications
editThe PRR classified articulated locomotives and joined locomotive units by using multiples of the previous classifications.
Non-Articulated steam:
- 1320 - 2-2-2-0 locomotive, based on the London and North Western Railway's Dreadnought Class locomotive. One built.[2]
Articulated steam:
- CC1s - 0-8-8-0 Mallet locomotive. Treated as two 0-8-0s for classification. One built.
- CC2s - 0-8-8-0 Mallet locomotive. 10 built.
- HC1s - 2-8-8-0 simple articulated locomotive. The PRR's only main-line articulated. One built.
- HH1s - 2-8-8-2 Mallet locomotive. Treated for classification purposes as two 2-8-0s back to back.
- HH1 - 2-8-8-2 Norfolk & Western class Y3 borrowed by PRR during World War II.
Articulated electric:
- AA1 - experimental 0-4-4-0 or B-B electric locomotives.
- BB1 - two-unit prototype AC electric 0-6-0+0-6-0 switching locomotive, later split into single units as class B1.
- BB2 - two-unit 0-6-0+0-6-0 DC electric switching locomotives, later split into single units as class B1.
- BB3 - two-unit 0-6-0+0-6-0 DC electric switching locomotives for LIRR, later split into single units as class B3.
- DD1 - two-unit DC electric locomotive, two 4-4-0 half-locomotives semi-permanently coupled back to back. Served between Manhattan Transfer and Penn Station, and to Sunnyside Yard.
- DD2 - experimental mixed-traffic AC electric locomotive, similar in overall design and appearance to GG1.
- FF1 - 2-6-6-2 (1-C+C-1) experimental electric locomotive, 1917. Too powerful.
- FF2 - 2-6-6-2 motor-generator AC electric locomotives acquired second-hand from the Great Northern Railway (their classes Y1 and Y1a) in 1956.
- GG1 - express passenger and freight electric locomotive, highly successful.
Non-standard electric classification
edit- E2b - experimental B-B General Electric-built AC electric locomotives (3 pairs built).
- E3b - experimental B-B-B Baldwin-Lima-Hamilton-Westinghouse AC/DC rectifier locomotives (1 pair built).
- E2c - experimental C-C Baldwin-Lima-Hamilton-Westinghouse AC/DC rectifier locomotives (1 pair built)
- E44 - 1960 C-C General Electric AC/DC rectifier freight locomotives.
The horsepower-based designation unique to the E44 would be retained and expanded by Penn Central to cover the former New Haven EF4s (E33) and EP5s (E40).
The Pennsylvania Railroad was slow to dieselize. By the end of WW2 they only had 18 units. However over the next 22 years they had acquired a total of 3005 units.[1] They bought from all the manufacturers: Alco 516 units, Baldwin 643 units, EMD 1,479 units, Fairbanks-Morse 200 units, General Electric 145 units, and Lima 22 units. This diversity was a nightmare for the maintenance department as there was very little compatibility amongst the different builders.
- The class number system is as follows:
- The first letter stood for the manufacturer; A=Alco, B =Baldwin, G =General Electric, E =EMD, F =Fairbanks-Morse, and L =Lima.
- The second and third letters represented the type of service; S =switcher, F =Freight, P =passenger, :: PF=dual service, RS =road-switcher, and H =helper.
- The next number(s) were for horse power rounded to hundreds.
- The last letter, if used, was for model variations.
Alco
editPRR Class | Builder’s Model | Build date | Total produced |
Wheel arrangement |
Service | Power output | Notes |
---|---|---|---|---|---|---|---|
AS6 | S-1 | 1947–1951 | 40 | B-B | Switcher | 600 hp (450 kW) | |
AS10 | S-2 | 1948–1954 | 90 | B-B | Switcher | 1,000 hp (750 kW) | 22 units MU class AS10m |
AS10a | T-6 | 1958 | 6 | B-B | Switcher | 1,000 hp (750 kW) | |
AF15 | FA-1 | 1948–1950 | 8 | B-B | Freight | 1,500 hp (1,120 kW) | |
AF15 | FB-1 | 1948–1950 | 8 | B-B | Freight | 1,500 hp (1,120 kW) | |
AF16 | FA-2 | 1951 | 24 | B-B | Freight | 1,600 hp (1,190 kW) | |
AF16 | FA-2 | 1951 | 12 | B-B | Freight | 1,600 hp (1,190 kW) | |
AFP20 | PA-1 | 1947 | 10 | A1A-A1A | Pass | 2,000 hp (1,490 kW) | many converted to Freight |
AFP20 | PB-2 | 1947 | 5 | A1A-A1A | Pass | 2,000 hp (1,490 kW) | many converted to Freight |
ARS10 | RS-1 | 1948–1952 | 27 | B-B | Freight | 1,000 hp (750 kW) | 5 units used in Pass service |
ARS15 | RS-2 | 1948 | 6 | B-B | Freight | 1,500 hp (1,120 kW) | ex D&H |
ARS16 | RS-3 | 1951–1955 | 115 | B-B | Freight | 1,600 hp (1,190 kW) | 45 units used in Pass service |
ARS16a | RSD-4 | 1952–1953 | 6 | C-C | Freight | 1,600 hp (1,190 kW) | |
ARS18 | RS-11 | 1956–1957 | 32 | B-B | Freight | 1,800 hp (1,340 kW) | |
ARS18a | RSD-12 | 1957–1958 | 25 | C-C | Freight | 1,800 hp (1,340 kW) | |
ARS20 | RS-11 | 1956–1957 | 6 | B-B | Freight | 2,000 hp (1,490 kW) | |
ARS24 | RSD-15 | 1956 | 6 | C-C | Freight | 2,400 hp (1,790 kW) | |
ARS24s | RSD-7 | 1955–1956 | 5 | C-C | Pass | 2,400 hp (1,790 kW) | |
ARS24 | RS-27 | 1962 | 15 | B-B | Freight | 2,400 hp (1,790 kW) | |
AF24 | C-424 | 1962 | 1 | B-B | Freight | 2,400 hp (1,790 kW) | |
AF25 | C-425 | 1964–1965 | 31 | B-B | Freight | 2,500 hp (1,860 kW) | |
AF27 | C-628 | 1965 | 15 | C-C | Freight | 2,750 hp (2,050 kW) | |
AF30 | C-630 | 1966 | 15 | C-C | Freight | 3,000 hp (2,240 kW) | |
AF36 | C-636 | 1968 | 15 | C-C | Freight | 3,600 hp (2,680 kW) | ordered but del to PC |
Baldwin Locomotive Works
editPRR Class | Builder’s Model | Build date | Total produced |
Wheel arrangement |
Service | Power output | Notes |
---|---|---|---|---|---|---|---|
BS6 | VO-660 | 1942–1945 | 12 | B-B | Switcher | 600 hp (450 kW) | |
BS6 | DS-4-4-660 | 1942–1945 | 99 | B-B | Switcher | 660 hp (490 kW) | |
BS7 | DS-4-4-750 | 1951 | 24 | B-B | Switcher | 750 hp (560 kW) | |
BS7 | S8 | 1951 | 7 | B-B | Switcher | 750 hp (560 kW) | |
BS10 | VO | 1943–1945 | 8 | B-B | Switcher | 1,000 hp (750 kW) | |
BS10 | DS-4-4-1000 | 1948–1950 | 137 | B-B | Switcher | 1,000 hp (750 kW) | |
BS12 | S-12 | 1951–1956 | 98 | B-B | Switcher | 1,200 hp (890 kW) | |
BS24 | RT-624 | 1951–1954 | 24 | C-C | Transfer | 2,400 hp (1,790 kW) | |
BF15 | DR-4-4-1500 | 1940–1950 | 34 | B-B | Freight | 1,500 hp (1,120 kW) | Cab (A) aka “Sharknose” |
BF15 | DR-4-4-1500 | 1940–1950 | 34 | B-B | Freight | 1,500 hp (1,120 kW) | Cab (B) |
BF16 | RF-16 (A) | 1950–1952 | 72 | B-B | Freight | 1,600 hp (1,190 kW) | Cab (A) aka “Sharknose” |
BF16 | RF-16 (B) | 1950–1952 | 30 | B-B | Freight | 1,600 hp (1,190 kW) | Cab (B) |
BP60a | DR-12-8-3000 | 1947–1948 | 24 | 2-D-D-2 | Pass | 3,000 hp (2,240 kW) | converted to helper aka "Centipede" |
BP20 | DR-6-4-2000 | 1948 | 18 | A1A-A1A | Pass | 2,000 hp (1,490 kW) | Cab (A) |
BP20 | DR-6-4-2000 | 1948 | 9 | A1A-A1A | Pass | 2,000 hp (1,490 kW) | Cab (B) |
BRS10 | DRS-4-4-1000 | 1949–1950 | 6 | B-B | Pass | 1,000 hp (750 kW) | |
BRS12 | RS-12 | 1951–1954 | 8 | B-B | Pass | 1,200 hp (890 kW) | 3 units used in Pass service |
BRS15 | DRS-4-4-1500 | 1950 | 8 | B-B | Pass | 1,500 hp (1,120 kW) | |
BRS16 | AS-616 | 1953–1955 | 28 | C-C | Pass | 1,600 hp (1,190 kW) | 16 units used in Pass service |
BRS24 | RT-624 | 1951–1954 | 22 | C-C | Transfer | 2,400 hp (1,790 kW) | |
LRS25 | T2500 | 1950–1951 | 22 | C-C | Transfer | 2,500 hp (1,860 kW) | Built by Lima Locomotive Works |
General Electric
editPRR Class | Builder’s Model | Build date | Total produced |
Wheel arrangement |
Service | Power output | Notes |
---|---|---|---|---|---|---|---|
GS4 | 44 Ton | 1948–1950 | 46 | B-B | Switcher | 400 hp (300 kW) | |
GF25 | U25B | 1965 | 59 | B-B | Freight | 2,500 hp (1,860 kW) | |
GF25a | U25C | 1965 | 20 | C-C | Freight | 2,500 hp (1,860 kW) | |
GF28a | U28C | 1966 | 15 | C-C | Freight | 2,800 hp (2,090 kW) | |
GF30a | U30C | 1967 | 5 | C-C | Freight | 3,000 hp (2,240 kW) |
EMD
editPRR Class | Builder’s Model | Build date | Total produced |
Wheel arrangement |
Service | Power output | Notes |
---|---|---|---|---|---|---|---|
ES6 | SW | 1937 | 12 | B-B | Switcher | 600 hp (450 kW) | |
ES6 | SW1 | 1942–1950 | 85 | B-B | Switcher | 600 hp (450 kW) | |
ES10 | NW2 | 1941–1948 | 32 | B-B | Switcher | 1,000 hp (750 kW) | |
ES12 | SW7-SW9 | 1950–1953 | 84 | B-B | Switcher | 1,200 hp (890 kW) | |
ES12 | SW1200 | 1957 | 35 | B-B | Switcher | 1,200 hp (890 kW) | |
EF15 | F3A,F7A | 1947–1952 | 203 | B-B | Freight | 1,500 hp (1,120 kW) | Cab A unit |
EF15 | F3B,F7B | 1947–1952 | 107 | B-B | Freight | 1,500 hp (1,120 kW) | Cab B unit |
EPF15 | FP7A | 1952 | 40 | B-B | Pass | 1,500 hp (1,120 kW) | Cab A unit |
EPF15 | FP7B | 1952 | 14 | B-B | Pass | 1,500 hp (1,120 kW) | Cab B unit |
EP20 | E7A | 1945–1949 | 46 | A1A-A1A | Pass | 2,000 hp (1,490 kW) | Cab A unit |
EP20 | E7B | 1945–1949 | 14 | A1A-A1A | Pass | 2,000 hp (1,490 kW) | Cab B unit |
EP22 | E8A | 1950–1952 | 74 | A1A-A1A | Pass | 2,250 hp (1,680 kW) | Cab A unit |
ERS15 | GP7 | 1952–1953 | 66 | B-B | Freight | 1,500 hp (1,120 kW) | 10 units used in Pass service |
ERS15ax | SD7 | 1953 | 2 | B-B | Freight | 1,500 hp (1,120 kW) | |
ERS17 | GP9 | 1955–1959 | 310 | B-B | Freight | 1,750 hp (1,300 kW) | 40 units no cab |
ERS17a | SD9 | 1957–1958 | 25 | C-C | Freight | 1,750 hp (1,300 kW) | |
EF22 | GP30 | 1963 | 52 | B-B | Freight | 2,250 hp (1,680 kW) | |
EF25 | GP35 | 1964–1965 | 119 | B-B | Freight | 2,500 hp (1,860 kW) | |
EF25a | SD35 | 1965 | 40 | C-C | Freight | 2,500 hp (1,860 kW) | |
EF30a | SD40 | 1966 | 65 | C-C | Freight | 3,000 hp (2,240 kW) | |
EF36 | SD45 | 1966 | 65 | C-C | Freight | 3,600 hp (2,680 kW) | |
EF20a | GP38 | 1967 | 5 | B-B | Freight | 2,000 hp (1,490 kW) | Built for PRSL |
Fairbanks-Morse
editPRR Class | Builder’s Model | Build date | Total produced |
Wheel arrangement |
Service | Power output | Notes |
---|---|---|---|---|---|---|---|
FS10 | H10-44 | 1948–1949 | 55 | B-B | Switcher | 1,000 hp (750 kW) | |
FS12 | H12-44 | 1952–1954 | 16 | B-B | Switcher | 1,200 hp (890 kW) | |
FF20 | Erie Built | 1947–1948 | 36 | A1A-A1A | Freight | 2,000 hp (1,490 kW) | Cab A |
FF20 | Erie Built | 1947–1948 | 12 | A1A-A1A | Freight | 2,000 hp (1,490 kW) | Cab B |
FF16 | CF-16-4 | 1950 | 16 | B-B | Freight | 1,600 hp (1,190 kW) | Cab A |
FF16 | CF-16-4 | 1950 | 8 | B-B | Freight | 1,600 hp (1,190 kW) | Cab B |
FRS-16 | H16-44 | 1952 | 10 | B-B | Freight | 1,600 hp (1,190 kW) | |
FRS-20 | H20-44 | 1948–1951 | 38 | B-B | Freight | 2,000 hp (1,490 kW) | |
FRS-24 | H24-66 | 1953–1954 | 9 | C-C | Freight | 2,400 hp (1,790 kW) | aka Train Master |