Oil discharge monitoring equipment
This article needs additional citations for verification. (June 2015) |
Oil discharge monitoring equipment (ODME) is based on a measurement of oil content in the ballast and slop water, to measure conformance with regulations.[1] The apparatus is equipped with a GPS, data recording functionality, an oil content meter and a flow meter.[2] By use of data interpretation, a computing unit will be able to allow the discharge to continue or it will stop it using a valve outside the deck.[2]
Operating principle
editA sample point on the discharge line allows for the analyzer to determine the oil content of the ballast now and slop water in PPM.[2] The analyzer is self-maintaining by periodical cleansings with fresh water, and therefore requires a minimum of active maintenance from the crew.[2] The results of the analyzer are sent to a computer, which determines whether the oil content values are to result in overboard discharge or not.[2] The valves that direct the ballast water either over board or to slop tank are controlled by the integrated computer, and a GPS signal further automates the process by including special areas and completes the required input for the Oil Record Book.[2]
All oil tankers with a gross tonnage of larger than 150 must have efficient Oil Discharge Monitoring Equipment on board.[3][4]
The oily discharge is sent out to sea through a pump.[5] The oily mixture has to pass through a series of sensors to determine whether it is acceptable to be sent to the discharge pipe.[6]
Based on regulations, the following values must be recorded by the system:[3]
- Date and time of the discharge
- Location of the ship
- Oil content of the discharge in ppm
- Total quantity discharged
- Discharge rate
All records of Oil Detection Monitoring Equipment must be stored on board ships for no less than 3 years.[3]
Oil Discharge Monitoring systems today consist of a computing unit that is installed in the cargo control room. The computer unit control and receives data from other ODME components.[7]
ODME systems also have an analyzing unit that contains the Oil content meter, a fresh water valve for cleaning purposes, and a pressure transmitter that monitors the sample flow through the measuring cell.[7]
See also
editReferences
edit- ^ "VAFInstruments | Home of VAF Instruments | Products | Oil Discharge Monitoring Equipment". www.vaf.nl. Retrieved 2015-07-23.
- ^ a b c d e f "ODME Oil Discharge Monitoring Systems and Equipment". www.insatechmarine.com. Retrieved 2015-06-04.
- ^ a b c "What is Oil Discharge Monitoring and Control System (ODMCS) on Ship?". 2011-02-18. Retrieved 2015-06-09.
- ^ "Regulation 31 - Oil discharge monitoring and control system". www.marpoltraining.com. Retrieved 2015-07-28.
- ^ "Oil in water, oil water analyzer, oil/water monitors by Arjay Engineering". www.arjayeng.com. Retrieved 2015-07-24.
- ^ Germany, KSB AG, Frankenthal. "ODME S-3000". Retrieved 2015-07-23.
{{cite web}}
: CS1 maint: multiple names: authors list (link) - ^ a b www.merreklam.se, Merreklam. "ODME 2005 - Oil Discharge Monitor | Monitoring and control systems | Products | JOWA AB". www.jowa.se. Retrieved 2015-07-23.