In mathematics, mollifiers (also known as approximations to the identity) are particular smooth functions, used for example in distribution theory to create sequences of smooth functions approximating nonsmooth (generalized) functions, via convolution. Intuitively, given a (generalized) function, convolving it with a mollifier "mollifies" it, that is, its sharp features are smoothed, while still remaining close to the original.[1]
![](http://up.wiki.x.io/wikipedia/commons/thumb/7/7d/Mollified_Illustration.svg/220px-Mollified_Illustration.svg.png)
They are also known as Friedrichs mollifiers after Kurt Otto Friedrichs, who introduced them.[2]
Historical notes
editMollifiers were introduced by Kurt Otto Friedrichs in his paper (Friedrichs 1944, pp. 136–139), which is considered a watershed in the modern theory of partial differential equations.[3] The name of this mathematical object has a curious genesis, and Peter Lax tells the story in his commentary on that paper published in Friedrichs' "Selecta".[4] According to him, at that time, the mathematician Donald Alexander Flanders was a colleague of Friedrichs; since he liked to consult colleagues about English usage, he asked Flanders for advice on naming the smoothing operator he was using.[3] Flanders was a modern-day puritan, nicknamed by his friends Moll after Moll Flanders in recognition of his moral qualities: he suggested calling the new mathematical concept a "mollifier" as a pun incorporating both Flanders' nickname and the verb 'to mollify', meaning 'to smooth over' in a figurative sense.[5]
Previously, Sergei Sobolev had used mollifiers in his epoch making 1938 paper,[6] which contains the proof of the Sobolev embedding theorem: Friedrichs himself acknowledged Sobolev's work on mollifiers, stating "These mollifiers were introduced by Sobolev and the author...".[7]
It must be pointed out that the term "mollifier" has undergone linguistic drift since the time of these foundational works: Friedrichs defined as "mollifier" the integral operator whose kernel is one of the functions nowadays called mollifiers. However, since the properties of a linear integral operator are completely determined by its kernel, the name mollifier was inherited by the kernel itself as a result of common usage.
Definition
editModern (distribution based) definition
editDefinition 1. Let be a smooth function on , , and put for . Then is a mollifier if it satisfies the following three requirements:
- (1) it is compactly supported,[8]
- (2) ,
- (3) ,
where is the Dirac delta function, and the limit must be understood as taking place in the space of Schwartz distributions. The function may also satisfy further conditions of interest;[9] for example, if it satisfies
- (4) for all ,
then it is called a positive mollifier, and if it satisfies
- (5) for some infinitely differentiable function ,
then it is called a symmetric mollifier.
Notes on Friedrichs' definition
editNote 1. When the theory of distributions was still not widely known nor used,[10] property (3) above was formulated by saying that the convolution of the function with a given function belonging to a proper Hilbert or Banach space converges as ε → 0 to that function:[11] this is exactly what Friedrichs did.[12] This also clarifies why mollifiers are related to approximate identities.[13]
Note 2. As briefly pointed out in the "Historical notes" section of this entry, originally, the term "mollifier" identified the following convolution operator:[13][14]
where and is a smooth function satisfying the first three conditions stated above and one or more supplementary conditions as positivity and symmetry.
Concrete example
editConsider the bump function of a variable in defined by
where the numerical constant ensures normalization. This function is infinitely differentiable, non analytic with vanishing derivative for |x| = 1. can be therefore used as mollifier as described above: one can see that defines a positive and symmetric mollifier.[15]
Properties
editAll properties of a mollifier are related to its behaviour under the operation of convolution: we list the following ones, whose proofs can be found in every text on distribution theory.[16]
Smoothing property
editFor any distribution , the following family of convolutions indexed by the real number
where denotes convolution, is a family of smooth functions.
Approximation of identity
editFor any distribution , the following family of convolutions indexed by the real number converges to
Support of convolution
editFor any distribution ,
- ,
where indicates the support in the sense of distributions, and indicates their Minkowski addition.
Applications
editThe basic application of mollifiers is to prove that properties valid for smooth functions are also valid in nonsmooth situations.
Product of distributions
editIn some theories of generalized functions, mollifiers are used to define the multiplication of distributions. Given two distributions and , the limit of the product of the smooth function obtained from one operand via mollification, with the other operand defines, when it exists, their product in various theories of generalized functions:
- .
"Weak=Strong" theorems
editMollifiers are used to prove the identity of two different kind of extension of differential operators: the strong extension and the weak extension. The paper by Friedrichs which introduces mollifiers (Friedrichs 1944) illustrates this approach.
Smooth cutoff functions
editBy convolution of the characteristic function of the unit ball with the smooth function (defined as in (3) with ), one obtains the function
which is a smooth function equal to on , with support contained in . This can be seen easily by observing that if and then . Hence for ,
- .
One can see how this construction can be generalized to obtain a smooth function identical to one on a neighbourhood of a given compact set, and equal to zero in every point whose distance from this set is greater than a given .[17] Such a function is called a (smooth) cutoff function; these are used to eliminate singularities of a given (generalized) function via multiplication. They leave unchanged the value of the multiplicand on a given set, but modify its support. Cutoff functions are used to construct smooth partitions of unity.
See also
editNotes
edit- ^ That is, the mollified function is close to the original with respect to the topology of the given space of generalized functions.
- ^ See (Friedrichs 1944, pp. 136–139).
- ^ a b See the commentary of Peter Lax on the paper (Friedrichs 1944) in (Friedrichs 1986, volume 1, p. 117).
- ^ (Friedrichs 1986, volume 1, p. 117)
- ^ In (Friedrichs 1986, volume 1, p. 117) Lax writes "On English usage Friedrichs liked to consult his friend and colleague, Donald Flanders, a descendant of puritans and a puritan himself, with the highest standard of his own conduct, noncensorious towards others. In recognition of his moral qualities he was called Moll by his friends. When asked by Friedrichs what to name the smoothing operator, Flanders remarked that they could be named "mollifier" after himself; Friedrichs was delighted, as on other occasions, to carry this joke into print."
- ^ See (Sobolev 1938).
- ^ Friedrichs (1953, p. 196).
- ^ This is satisfied if, for instance, is a bump function.
- ^ See (Giusti 1984, p. 11).
- ^ As when the paper (Friedrichs 1944) was published, few years before Laurent Schwartz widespread his work.
- ^ Obviously the topology with respect to convergence occurs is the one of the Hilbert or Banach space considered.
- ^ See (Friedrichs 1944, pp. 136–138), properties PI, PII, PIII and their consequence PIII0.
- ^ a b Also, in this respect, Friedrichs (1944, pp. 132) says:-"The main tool for the proof is a certain class of smoothing operators approximating unity, the "mollifiers".
- ^ See (Friedrichs 1944, p. 137), paragraph 2, "Integral operators".
- ^ See (Hörmander 1990, p. 14), lemma 1.2.3.: the example is stated in implicit form by first defining
- for ,
- for .
- ^ See for example (Hörmander 1990).
- ^ A proof of this fact can be found in (Hörmander 1990, p. 25), Theorem 1.4.1.
References
edit- Friedrichs, Kurt Otto (January 1944), "The identity of weak and strong extensions of differential operators", Transactions of the American Mathematical Society, 55 (1): 132–151, doi:10.1090/S0002-9947-1944-0009701-0, JSTOR 1990143, MR 0009701, Zbl 0061.26201. The first paper where mollifiers were introduced.
- Friedrichs, Kurt Otto (1953), "On the differentiability of the solutions of linear elliptic differential equations", Communications on Pure and Applied Mathematics, VI (3): 299–326, doi:10.1002/cpa.3160060301, MR 0058828, Zbl 0051.32703, archived from the original on 2013-01-05. A paper where the differentiability of solutions of elliptic partial differential equations is investigated by using mollifiers.
- Friedrichs, Kurt Otto (1986), Morawetz, Cathleen S. (ed.), Selecta, Contemporary Mathematicians, Boston-Basel-Stuttgart: Birkhäuser Verlag, pp. 427 (Vol. 1), pp. 608 (Vol. 2), ISBN 0-8176-3270-0, Zbl 0613.01020. A selection from Friedrichs' works with a biography and commentaries of David Isaacson, Fritz John, Tosio Kato, Peter Lax, Louis Nirenberg, Wolfgag Wasow, Harold Weitzner.
- Giusti, Enrico (1984), Minimal surfaces and functions of bounded variations, Monographs in Mathematics, vol. 80, Basel-Boston-Stuttgart: Birkhäuser Verlag, pp. xii+240, ISBN 0-8176-3153-4, MR 0775682, Zbl 0545.49018.
- Hörmander, Lars (1990), The analysis of linear partial differential operators I, Grundlehren der Mathematischen Wissenschaft, vol. 256 (2nd ed.), Berlin-Heidelberg-New York: Springer-Verlag, ISBN 0-387-52343-X, MR 1065136, Zbl 0712.35001.
- Sobolev, Sergei L. (1938), "Sur un théorème d'analyse fonctionnelle", Recueil Mathématique (Matematicheskii Sbornik) (in Russian and French), 4(46) (3): 471–497, Zbl 0022.14803. The paper where Sergei Sobolev proved his embedding theorem, introducing and using integral operators very similar to mollifiers, without naming them.