Wikipedia

List of ISO standards 5000–7999

(Redirected from ISO 7000)

Main article: List of ISO standards

This is a list of published[Note 1] International Organization for Standardization (ISO) standards and other deliverables.[Note 2] For a complete and up-to-date list of all the ISO standards, see the ISO catalogue.[1]

The standards are protected by copyright and most of them must be purchased. However, about 300 of the standards produced by ISO and IEC's Joint Technical Committee 1 (JTC 1) have been made freely and publicly available.[2]

This is a dynamic list and may never be able to satisfy particular standards for completeness. You can help by adding missing items with reliable sources.

ISO 5000 – ISO 7999

edit
  • ISO 5006:2017 Earth-moving machinery - Operator's field of view - Test method and performance criteria
  • ISO 5010:2007 Earth-moving machinery - Rubber-tyred machines - Steering requirements
  • ISO 5011:2014 Inlet air cleaning equipment for internal combustion engines and compressors - Performance testing
  • ISO 5053 Industrial trucks – Terminology and classification
    • ISO 5053-1:2015 Part 1: Types of industrial trucks
  • ISO/IEC 5055:2021 Information technology — Software measurement — Software quality measurement — Automated source code quality measures
  • ISO 5122:1979 Documentation - Abstract sheets in serial publications
  • ISO 5123:1984 Documentation - Headers for microfiche of monographs and serials
  • ISO 5127:2017 Information and documentation - Foundation and vocabulary
  • ISO 5128:1980 Acoustics – Measurement of noise inside motor vehicles
  • ISO 5129:2001 Acoustics - Measurement of sound pressure levels in the interior of aircraft during flight
  • ISO 5130:2007 Acoustics – Measurements of sound pressure level emitted by stationary road vehicles
  • ISO 5131:2015 Tractors for agriculture and forestry – Measurement of noise at the operator's position – Survey method
  • ISO 5135:1997 Acoustics – Determination of sound power levels of noise from air-terminal devices, air-terminal units, dampers and valves by measurement in a reverberation room
  • ISO 5136:2003 Acoustics – Determination of sound power radiated into a duct by fans and other air-moving devices – In-duct method
  • ISO 5138 Office machines - Vocabulary
    • ISO 5138-1:1978 Part 1: Dictation equipment
    • ISO 5138-2:1980 Part 2: Duplicators
    • ISO 5138-3:1981 Part 3: Addressing machines
    • ISO 5138-4:1981 Part 4: Letter opening machines
    • ISO 5138-5:1981 Part 5: Letter folding machines
    • ISO 5138-7:1986 Part 7: Postal franking machines
    • ISO 5138-9:1984 Part 9: Typewriters
  • ISO 5167 Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full
    • ISO 5167-1:2003 Part 1: General principles and requirements
    • ISO 5167-2:2003 Part 2: Orifice plates
    • ISO 5167-3:2003 Part 3: Nozzles and Venturi nozzles
    • ISO 5167-4:2003 Part 4: Venturi tubes
    • ISO 5167-5:2016 Part 5: Cone meters
    • ISO 5167-6:2019 Part 6: Wedge meters
  • ISO 5168:2005 Measurement of fluid flow – Procedures for the evaluation of uncertainties
  • ISO 5211:2017 Industrial valves - Part-turn actuator attachments
  • ISO/IEC 5218:2004 Information technology — Codes for the representation of human sexes
  • ISO/IEC 5230:2020 Information technology — OpenChain Specification
  • ISO 5232:1998 Graphical symbols for textile machinery
  • ISO 5234:2005 Textile machinery and accessories – Metallic card clothing – Definitions of dimensions, types and mounting
  • ISO 5237:1978 Textile machinery and accessories — Cones for yarn winding (cross wound) — Half angle of the cone 5 degrees 57' [Withdrawn: replaced with ISO 8489-5]
  • ISO 5238 Textile machinery and accessories – Packages of yarns and intermediate products
    • ISO 5238-1:1982 Part 1: Terminology
  • ISO 5239:1980 Textile machinery and accessories – Winding – Basic terms
  • ISO 5247 Textile machinery and accessories – Weaving machines
    • ISO 5247-1:2004 Part 1: Vocabulary and classification
    • ISO 5247-3:1993 Part 3: Parts of the machine – Vocabulary
  • ISO 5248:2003 Textile machinery and accessories – Dyeing and finishing machinery – Vocabulary for ancillary devices
  • ISO 5250:2003 Textile machinery and accessories – Dyeing and finishing machinery – Terms for tentering and heat-treatment machinery
  • ISO 5261:1995 Technical drawings – Simplified representation of bars and profile sections
  • ISO 5284:1986 Conveyor belts – List of equivalent terms
  • ISO 5288:2001 Synchronous belt drives - Vocabulary
  • ISO 5323:1984 Solid wood parquet and raw parquet blocks – Vocabulary
  • ISO 5329:1978 Solid wood paving blocks – Vocabulary
  • ISO 5344:2004 Electrodynamic vibration generating systems – Performance characteristics
  • ISO 5347 Methods for the calibration of vibration and shock pick-ups
    • ISO 5347-8:1993 Part 8: Primary calibration by dual centrifuge
    • ISO 5347-12:1993 Part 12: Testing of transverse shock sensitivity
    • ISO 5347-13:1993 Part 13: Testing of base strain sensitivity
    • ISO 5347-15:1993 Part 15: Testing of acoustic sensitivity
    • ISO 5347-16:1993 Part 16: Testing of mounting torque sensitivity
    • ISO 5347-17:1993 Part 17: Testing of fixed temperature sensitivity
    • ISO 5347-18:1993 Part 18: Testing of transient temperature sensitivity
    • ISO 5347-22:1997 Part 22: Accelerometer resonance testing – General methods
  • ISO 5348:1998 Mechanical vibration and shock – Mechanical mounting of accelerometers
  • ISO 5356 Anaesthetic and respiratory equipment – Conical connectors
    • ISO 5356-1:2015 Part 1: Cones and sockets
    • ISO 5356-2:2012 Part 2: Screw-threaded weight-bearing connectors
  • ISO 5358:1992 Anaesthetic machines for use with humans
  • ISO 5359:2014 Anaesthetic and respiratory equipment – Low-pressure hose assemblies for use with medical gases
  • ISO 5360:2016 Anaesthetic vaporizers – Agent-specific filling systems
  • ISO 5361:2016 Anaesthetic and respiratory equipment – Tracheal tubes and connectors
  • ISO 5362:2006 Anaesthetic reservoir bags
  • ISO 5364:2016 Anaesthetic and respiratory equipment – Oropharyngeal airways
  • ISO 5366:2016 Anaesthetic and respiratory equipment – Tracheostomy tubes and connectors
  • ISO 5367:2014 Anaesthetic and respiratory equipment – Breathing sets and connectors
  • ISO 5391:2003 Pneumatic tools and machines - Vocabulary
  • ISO 5396:1977 Hardmetal heading dies - Terminology
  • ISO 5408:2009 Screw threads - Vocabulary
  • ISO 5419:1982 Twist drills - Terms, definitions and types
  • ISO 5420:1983 Reamers - Terms, definitions and types
  • ISO 5426:1983 Information and documentation - Extension of the Latin alphabet coded character set for bibliographic information interchange[Note 3]
    • ISO 5426-2:1996 Part 2: Latin characters used in minor European languages and obsolete typography
  • ISO 5427:1984 Extension of the Cyrillic alphabet coded character set for bibliographic information interchange
  • ISO 5428:1984 Greek alphabet coded character set for bibliographic information interchange
  • ISO 5436 Geometrical Product Specifications (GPS) – Surface texture: Profile method; Measurement standards
    • ISO 5436-1:2000 Part 1: Material measures
    • ISO 5436-2:2012 Part 2: Software measurement standards
  • ISO 5445:1980 Ferrosilicon - Specification and conditions of delivery
  • ISO 5446:2017 Ferromanganese - Specification and conditions of delivery
  • ISO 5447:1980 Ferrosilicomanganese - Specification and conditions of delivery
  • ISO 5448:1981 Ferrochromium - Specification and conditions of delivery
  • ISO 5449:1980 Ferrosilicochromium - Specification and conditions of delivery
  • ISO 5450:1980 Ferrotungsten - Specification and conditions of delivery
  • ISO 5451:1980 Ferrovanadium - Specification and conditions of delivery
  • ISO 5452:1980 Ferromolybdenum - Specification and conditions of delivery
  • ISO 5453:1980 Ferroniobium - Specification and conditions of delivery
  • ISO 5454:1980 Ferrotitanium - Specification and conditions of delivery
  • ISO 5455:1979 Technical drawings – Scales
  • ISO 5456 Technical drawings – Projection methods
    • ISO 5456-1:1996 Part 1: Synopsis
    • ISO 5456-2:1996 Part 2: Orthographic representations
    • ISO 5456-3:1996 Part 3: Axonometric representations
    • ISO 5456-4:1996 Part 4: Central projection
  • ISO 5457:1999 Technical product documentation – Sizes and layout of drawing sheets
  • ISO 5458:1998 Geometrical Product Specifications (GPS) – Geometrical tolerancing – Positional tolerancing
  • ISO 5459:2011 Geometrical product specifications (GPS) – Geometrical tolerancing – Datums and datum systems
  • ISO 5479:1997 Statistical interpretation of data - Tests for departure from the normal distribution
  • ISO 5492:2008 Sensory analysis – Vocabulary
  • ISO 5496:2006 Sensory analysis – Methodology – Initiation and training of assessors in the detection and recognition of odours
  • ISO 5507:2002 Oilseeds, vegetable oils and fats – Nomenclature
  • ISO 5526:2013 Cereals, pulses and other food grains – Nomenclature
  • ISO 5527:2015 Cereals – Vocabulary
  • ISO 5572:1987 Shipbuilding and marine structures - Numbering of equipment and structural elements in ships
  • ISO 5576:1997 Non-destructive testing - Industrial X-ray and gamma-ray radiology - Vocabulary
  • ISO 5577:2017 Non-destructive testing - Ultrasonic testing - Vocabulary
  • ISO 5593:1997 Rolling bearings - Vocabulary
  • ISO 5598:2008 Fluid power systems and components - Vocabulary
  • ISO 5652:1984 Information processing – 9-Track, 12,7 mm (0.5 in) wide magnetic tape for information interchange – Format and recording, using group coding at 246 cpmm (6 250 cpi)
  • ISO 5653:1980 Information processing – Interchangeable magnetic twelve-disk pack (200 Mbytes)
  • ISO 5654 Information processing – Data interchange on 200 mm (8 in) flexible disk cartridges using two-frequency recording at 13 262 ftprad, 1,9 tpmm (48 tpi), on one side
    • ISO 5654-1:1984 Part 1: Dimensional, physical and magnetic characteristics
    • ISO 5654-2:1985 Part 2: Track format
  • ISO 5659 Plastics - Smoke generation
    • ISO 5659-1:1996 Part 1: Guidance on optical-density testing [Withdrawn: replaced by ISO 5659-2:2012]
    • ISO 5659-2:2017 Part 2: Determination of optical density by a single-chamber test
    • ISO/TR 5659-3:1999 Part 3: Determination of optical density by a dynamic-flow method [Withdrawn, no replacement]
  • ISO 5660 Reaction-to-fire tests – Heat release, smoke production and mass loss rate
    • ISO 5660-1 Heat release rate (cone calorimeter method)
    • ISO 5660-2 Smoke production rate (dynamic measurement)
    • ISO/TS 5660-3 Guidance on measurement
  • ISO 5681:1992 Equipment for crop protection – Vocabulary
  • ISO 5702:1983 Equipment for harvesting – Combine harvester component parts – Equivalent terms
  • ISO 5725 Accuracy (trueness and precision) of measurement methods and results
    • ISO 5725-1:1994 Part 1: General principles and definitions
    • ISO 5725-2:1994 Part 2: Basic method for the determination of repeatability and reproducibility of a standard measurement method
    • ISO 5725-3:1994 Part 3: Intermediate measures of the precision of a standard measurement method
    • ISO 5725-4:1994 Part 4: Basic methods for the determination of the trueness of a standard measurement method
    • ISO 5725-5:1998 Part 5: Alternative methods for the determination of the precision of a standard measurement method
    • ISO 5725-6:1994 Part 6: Use in practice of accuracy values
  • ISO 5742:2004 Pliers and nippers - Nomenclature
  • ISO 5775 Bicycle tires and rims
  • ISO 5776 Graphic technology - Symbols for text correction
  • ISO 5800:2001 Photography – Colour negative films for still photography – Determination of ISO speed
  • ISO 5806:1984 Information processing - Specification of single-hit decision tables
  • ISO 5807:1985 Information processing - Documentation symbols and conventions for data, program and system flowcharts, program network charts and system resources charts
  • ISO 5826:2014 Resistance welding equipment – Transformers – General specifications applicable to all transformers
  • ISO 5832 Implants for surgery – Metallic materials
    • ISO 5832-1:2016 Part 1: Wrought stainless steel
    • ISO 5832-2:1999 Part 2: Unalloyed titanium
    • ISO 5832-3:2016 Part 3: Wrought titanium 6-aluminium 4-vanadium alloy
    • ISO 5832-4:2014 Part 4: Cobalt-chromium-molybdenum casting alloy
    • ISO 5832-5:2005 Part 5: Wrought cobalt-chromium-tungsten-nickel alloy
    • ISO 5832-6:1997 Part 6: Wrought cobalt-nickel-chromium-molybdenum alloy
    • ISO 5832-7:2016 Part 7: Forgeable and cold-formed cobalt-chromium-nickel-molybdenum-iron alloy
    • ISO 5832-8:1997 Part 8: Wrought cobalt-nickel-chromium-molybdenum- tungsten-iron alloy
    • ISO 5832-9:2007 Part 9: Wrought high nitrogen stainless steel
    • ISO 5832-11:2014 Part 11: Wrought titanium 6-aluminium 7-niobium alloy
    • ISO 5832-12:2007 Part 12: Wrought cobalt-chromium-molybdenum alloy
    • ISO 5832-14:2007 Part 14: Wrought titanium 15-molybdenum 5-zirconium 3-aluminium alloy
  • ISO 5833:2002 Implants for surgery – Acrylic resin cements
  • ISO 5834 Implants for surgery – Ultra-high-molecular-weight polyethylene
    • ISO 5834-1:2005 Part 1: Powder form
    • ISO 5834-2:2011 Part 2: Moulded forms
    • ISO 5834-3:2005 Part 3: Accelerated ageing methods
    • ISO 5834-4:2005 Part 4: Oxidation index measurement method
    • ISO 5834-5:2005 Part 5: Morphology assessment method
  • ISO 5835:1991 Implants for surgery – Metal bone screws with hexagonal drive connection, spherical under-surface of head, asymmetrical thread – Dimensions
  • ISO 5836:1988 Implants for surgery – Metal bone plates – Holes corresponding to screws with asymmetrical thread and spherical under-surface
  • ISO 5837 Implants for surgery – Intramedullary nailing systems
    • ISO 5837-1:1985 Part 1: Intramedullary nails with cloverleaf or V-shaped cross-section
  • ISO 5838 Implants for surgery – Metallic skeletal pins and wires[Note 3]
    • ISO 5838-1:2013 Part 1: General requirements
    • ISO 5838-2:1991 Part 2: Steinmann skeletal pins – Dimensions
    • ISO 5838-3:1993 Part 3: Kirschner skeletal wires
  • ISO 5840 Cardiovascular implants – Cardiac valve prostheses
    • ISO 5840-1:2015 Part 1: General requirements
    • ISO 5840-2:2015 Part 2: Surgically implanted heart valve substitutes
    • ISO 5840-3:2013 Part 3: Heart valve substitutes implanted by transcatheter techniques
  • ISO 5841 Implants for surgery – Cardiac pacemakers
    • ISO 5841-2:2014 Part 2: Reporting of clinical performance of populations of pulse generators or leads
    • ISO 5841-3:2013 Part 3: Low-profile connectors (IS-1) for implantable pacemakers
  • ISO 5843 Aerospace - List of equivalent terms[Note 3]
    • ISO 5843-1:1985 Part 1: Aerospace electrical equipment
    • ISO 5843-2:1990 Part 2: Aerospace rivets
    • ISO 5843-3:1997 Part 3: Aerospace bolts and nuts
    • ISO 5843-4:1990 Part 4: Flight dynamics
    • ISO 5843-5:1990 Part 5: Environmental and operating conditions for aircraft equipment
    • ISO 5843-6:1985 Part 6: Standard atmosphere
    • ISO 5843-8:1988 Part 8: Aircraft reliability
    • ISO 5843-9:1988 Part 9: Aircraft
    • ISO 5843-10:1988 Part 10: Aircraft structure
  • ISO 5845 Technical drawings – Simplified representation of the assembly of parts with fasteners
    • ISO 5845-1:1995 Part 1: General principles
    • ISO 5845-2:1995 Part 2: Rivets for aerospace equipment
  • ISO 5859:2014 Aerospace series - Graphic symbols for schematic drawings of hydraulic and pneumatic systems and components
  • ISO 5878:1982 Reference atmospheres for aerospace use
  • ISO 5893 Rubber and plastics test equipment – Tensile, flexural and compression types (constant rate of traverse) – Specification
  • ISO 5963:1985 Documentation - Methods for examining documents, determining their subjects, and selecting indexing terms
  • ISO 5964 Documentation – Guidelines for the establishment and development of multilingual thesauri
  • ISO 5967:1981 Taps and thread cutting - Nomenclature of the main types and terminology
  • ISO 5968:1981 Circular screwing dies - Terminology
  • ISO 5971:1981 Size designation of clothes – Pantyhose
  • ISO 5989:1995 Photography - Pre-packaged chemicals for the processing of silver halide based photographic materials - Vocabulary
  • ISO 5993 Sodium hydroxide for industrial use—Determination of mercury content—Flameless atomic absorption spectrometric method
  • ISO 6009:2016 Hypodermic needles for single use – Colour coding for identification
  • ISO 6011:2003 Earth-moving machinery – Visual display of machine operation
  • ISO 6050:1987 Shipbuilding - Bulbous bow and side thruster symbols
  • ISO 6068:1985 Information processing – Recording characteristics of instrumentation magnetic tape (including telemetry systems) – Interchange requirements
  • ISO 6070:1981 Auxiliary tables for vibration generators – Methods of describing equipment characteristics
  • ISO 6078:1982 Black tea – Vocabulary
  • ISO 6093:1985 Information processing - Representation of numerical values in character strings for information interchange
  • ISO 6098:1984 Information processing – Self-loading cartridges for 12,7 mm (0.5 in) wide magnetic tape
  • ISO 6107 Water quality—Vocabulary
    • ISO 6107-1:2004 (No part title)
    • ISO 6107-2:2006 (No part title)
    • ISO 6107-3:1993 (No part title)
    • ISO 6107-4:1993 (No part title)
    • ISO 6107-5:2004 (No part title)
    • ISO 6107-6:2004 (No part title)
    • ISO 6107-7:2006 (No part title)
    • ISO 6107-8:1993 (No part title)
    • ISO 6107-9:1997 Part 9: Alphabetical list and subject index
  • ISO 6152:1982 Thermometers for use with alcoholometers and alcohol hydrometers
  • ISO 6160:1979 Programming languages - PL/1
  • ISO 6165:2012 Earth-moving machinery – Basic types – Identification and terms and definitions
  • ISO 6166:2013 Securities and related financial instruments – International securities identification numbering system (ISIN)
  • ISO 6173:1982 Open-end spinning machines – Vocabulary
  • ISO 6188:1986 Plastics — Poly(alkylene terephthalate) granules — Determination of water content [Withdrawn: replaced with ISO 15512]
  • ISO 6194 Rotary-shaft lip-type seals incorporating elastomeric sealing elements
    • ISO 6194-2:2009 Part 2: Vocabulary
    • ISO 6194-5 Identification of visual imperfections
  • ISO 6196 Micrographics - Vocabulary
    • ISO 6196-1:1993 Part 1: General terms
    • ISO 6196-2:1993 Part 2: Image positions and methods of recording
    • ISO 6196-3:1997 Part 3: Film processing
    • ISO 6196-4:1998 Part 4: Materials and packaging
    • ISO 6196-5:1987 Part 5: Quality of images, legibility, inspection
    • ISO 6196-6:1992 Part 6: Equipment
    • ISO 6196-7:1992 Part 7: Computer micrographics
    • ISO 6196-8:1998 Part 8: Use
    • ISO 6196-10:1999 Part 10: Index
  • ISO 6206:1979 Chemical products for industrial use – Sampling – Vocabulary
  • ISO 6217:1982 Shipbuilding – Inland navigation – Pilot craft – Identification painting and inscriptions
  • ISO 6222:1999 Water quality – Enumeration of culturable micro-organisms – Colony count by inoculation in a nutrient agar culture medium
  • ISO 6284:1996 Construction drawings – Indication of limit deviations
  • ISO 6289:2003 Skis – Vocabulary
  • ISO 6336 Calculation of load capacity of spur and helical gears
  • ISO 6344 Coated abrasives – Grain size analysis
  • ISO 6345:1990 Shipbuilding and marine structures – Windows and side scuttles – Vocabulary
  • ISO 6346 Freight containers – Coding, identification and marking
  • ISO 6348:1980 Textiles – Determination of mass – Vocabulary
  • ISO 6352:1985 Ferronickel - Determination of nickel content - Dimethylglyoxime gravimetric method
  • ISO 6354:1982 Adhesives – Vocabulary [Withdrawn: replaced with ISO 472]
  • ISO 6355:1988 Textile glass – Vocabulary [Withdrawn: replaced with ISO 472]
  • ISO 6357:1985 Documentation – Spine titles on books and other publications
  • ISO 6372:2017 Nickel and nickel alloys – Terms and definitions
  • ISO 6385:2016 Ergonomics principles in the design of work systems
  • ISO 6393:2008 Earth-moving machinery – Determination of sound power level – Stationary test conditions
  • ISO 6394:2008 Earth-moving machinery – Determination of emission sound pressure level at operator's position – Stationary test conditions
  • ISO 6395:2008 Earth-moving machinery – Determination of sound power level – Dynamic test conditions
  • ISO 6396:2008 Earth-moving machinery – Determination of emission sound pressure level at operator's position – Dynamic test conditions
  • ISO 6405 Earth-moving machinery - Symbols for operator controls and other displays
    • ISO 6405-1:2017 Part 1: Common symbols
    • ISO 6405-2:2017 Part 2: Symbols for specific machines, equipment and accessories
  • ISO 6410 Technical drawings – Screw threads and threaded parts
    • ISO 6410-1:1993 Part 1: General conventions
    • ISO 6410-2:1993 Part 2: Screw thread inserts
    • ISO 6410-3:1993 Part 3: Simplified representation
  • ISO 6411:1982 Technical drawings – Simplified representation of centre holes
  • ISO 6412 Technical drawings – Simplified representation of pipelines
    • ISO 6412-1:2017 Part 1: General rules and orthogonal representation
    • ISO 6412-2:2017 Part 2: Isometric projection
    • ISO 6412-3:2017 Part 3: Terminal features of ventilation and drainage systems
  • ISO 6413:1988 Technical drawings – Representation of splines and serrations
  • ISO 6414:1982 Technical drawings for glassware
  • ISO 6416:2017 Hydrometry – Measurement of discharge by the ultrasonic transit time (time of flight) method
  • ISO 6420:2016 Hydrometry – Position fixing equipment for hydrometric boats
  • ISO 6421:2012 Hydrometry – Methods for assessment of reservoir sedimentation
  • ISO 6422 Layout key for trade documents
    • ISO 6422-1:2010 Part 1: Paper-based documents
  • ISO 6425:1996 Divers' watches
  • ISO 6426 Horological vocabulary
    • ISO 6426-1:1982 Part 1: Technical and scientific definitions
    • ISO 6426-2:2002 Part 2: Technical and commercial definitions
  • ISO 6428:1982 Technical drawings – Requirements for microcopying
  • ISO/IEC 6429:1992 Information technology – Control functions for coded character sets
  • ISO 6433:2012 Technical product documentation – Part references
  • ISO 6438:1983 Documentation – African coded character set for bibliographic information interchange
  • ISO 6461 Water quality – Detection and enumeration of the spores of sulfite-reducing anaerobes (clostridia)
    • ISO 6461-1:1986 Part 1: Method by enrichment in a liquid medium
    • ISO 6461-2:1986 Part 2: Method by membrane filtration
  • ISO 6467:1980 Ferrovanadium - Determination of vanadium content - Potentiometric method
  • ISO 6472:2017 Rubber compounding ingredients – Abbreviated terms
  • ISO 6474 Implants for surgery – Ceramic materials
    • ISO 6474-1:2010 Part 1: Ceramic materials based on high purity alumina
    • ISO 6474-2:2012 Part 2: Composite materials based on a high-purity alumina matrix with zirconia reinforcement
  • ISO 6475:1989 Implants for surgery – Metal bone screws with asymmetrical thread and spherical under-surface – Mechanical requirements and test methods
  • ISO 6501:1988 Ferronickel - Specification and delivery requirements
  • ISO 6512:1982 Building construction — Modular coordination — Storey heights and room heights [Withdrawn: replaced with ISO 21723]
  • ISO 6513:1982 Building construction — Modular coordination — Series of preferred multimodular sizes for horizontal dimensions [Withdrawn: replaced with ISO 21723]
  • ISO 6514:1982 Building construction — Modular coordination — Sub-modular increments [Withdrawn: replaced with ISO 21723]
  • ISO 6518 Road vehicles – Ignition systems
    • ISO 6518-1:2002 Part 1: Vocabulary
  • ISO/IEC 6522:1992 Information technology - Programming languages - PL/1 general purpose subset
  • ISO/IEC 6523 Information technology – Structure for the identification of organizations and organization parts
  • ISO 6531:2017 Machinery for forestry – Portable chain-saws – Vocabulary
  • ISO 6552:1980 Automatic steam traps - Definition of technical terms
  • ISO 6579 Microbiology of the food chain – Horizontal method for the detection, enumeration and serotyping of Salmonella[Note 3]
    • ISO 6579-1:2017 Part 1: Detection of Salmonella spp.
    • ISO/TS 6579-2:2012 Part 2: Enumeration by a miniaturized most probable number technique
    • ISO/TR 6579-3:2014 Part 3: Guidelines for serotyping of Salmonella spp.
  • ISO 6586:1980 Data processing - Implementation of the ISO 7- bit and 8- bit coded character sets on punched cards
  • ISO 6590 Packaging – Sacks – Vocabulary and types
    • ISO 6590-1:1983 Part 1: Paper sacks
    • ISO 6590-2:1986 Part 2: Sacks made from thermoplastic flexible film
  • ISO 6594 Cast iron drainage pipes and fittings – Spigot series
  • ISO 6596 Information processing – Data interchange on 130 mm (5.25 in) flexible disk cartridges using two-frequency recording at 7 958 ftprad, 1.9 tpmm (48 tpi), on one side
    • ISO 6596-1:1985 Part 1: Dimensional, physical and magnetic characteristics
    • ISO 6596-2:1985 Part 2: Track format
  • ISO 6611:2004 Milk and milk products – Enumeration of colony-forming units of yeasts and/or moulds – Colony-count technique at 25 degrees C
  • ISO 6621 Internal combustion engines – Piston rings
    • ISO 6621-1:2007 Part 1: Vocabulary
  • ISO 6630:1986 Documentation - Bibliographic control characters
  • ISO 6689 Equipment for harvesting – Combines and functional components
    • ISO 6689-1:1997 Part 1: Vocabulary
  • ISO 6706:1981 Plastics laboratory ware – Graduated measuring cylinders
  • ISO 6707 Buildings and civil engineering works – Vocabulary
    • ISO 6707-1:2014 Part 1: General terms
    • ISO 6707-2:2014 Part 2: Contract terms
    • ISO 6707-3:2017 Part 3: Sustainability terms
  • ISO 6709:2008 Standard representation of geographic point location by coordinates
  • ISO 6710:2017 Single-use containers for human venous blood specimen collection
  • ISO 6725:1981 Road vehicles – Dimensions of two-wheeled mopeds and motorcycles – Terms and definitions
  • ISO 6726:1988 Mopeds and motorcycles with two wheels – Masses – Vocabulary
  • ISO 6727:2012 Road vehicles - Motorcycles - Symbols for controls, indicators and tell-tales
  • ISO 6730:2005 Milk – Enumeration of colony-forming units of psychrotrophic microorganisms – Colony-count technique at 6,5 degrees C
  • ISO 6747:2013 Earth-moving machinery – Dozers – Terminology and commercial specifications
  • ISO 6780:2003 Flat pallets for intercontinental materials handling — Principal dimensions and tolerances, reviewed and confirmed 2014 [3]
  • ISO 6798:1995 Reciprocating internal combustion engines – Measurement of emitted airborne noise – Engineering method and survey method
  • ISO 6811:1998 Spherical plain bearings - Vocabulary
  • ISO 6813:1998 Road vehicles – Collision classification – Terminology
  • ISO 6814:2009 Machinery for forestry – Mobile and self-propelled machinery – Terms, definitions and classification
  • ISO 6861:1996 Information and documentation - Glagolitic alphabet coded character set for bibliographic information interchange
  • ISO 6862:1996 Information and documentation - Mathematical coded character set for bibliographic information interchange
  • ISO 6871 Dental base metal casting alloys
    • ISO 6871-1:1994 Part 1: Cobalt-based alloys [Withdrawn: replaced with ISO 22674]
    • ISO 6871-2:1994 Part 2: Nickel-based alloys [Withdrawn: replaced with ISO 22674]
  • ISO 6883:2017 Animal and vegetable fats and oils - Determination of conventional mass per volume (litre weight in air)
  • ISO 6887 Microbiology of the food chain - Preparation of test samples, initial suspension and decimal dilutions for microbiological examination[Note 3]
    • ISO 6887-1:2017 Part 1: General rules for the preparation of the initial suspension and decimal dilutions
    • ISO 6887-2:2017 Part 2: Specific rules for the preparation of meat and meat products
    • ISO 6887-3:2017 Part 3: Specific rules for the preparation of fish and fishery products
    • ISO 6887-4:2017 Part 4: Specific rules for the preparation of miscellaneous products
    • ISO 6887-5:2010 Part 5: Specific rules for the preparation of milk and milk products
    • ISO 6887-6:2013 Part 6: Specific rules for the preparation of samples taken at the primary production stage
  • ISO 6888 Microbiology of food and animal feeding stuffs – Horizontal method for the enumeration of coagulase-positive staphylococci (Staphylococcus aureus and other species)
    • ISO 6888-1:1999 Part 1: Technique using Baird-Parker agar medium
    • ISO 6888-2:1999 Part 2: Technique using rabbit plasma fibrinogen agar medium
    • ISO 6888-3:2003 Part 3: Detection and MPN technique for low numbers
  • ISO 6892 Metallic materials – Tensile testing
    • ISO 6892-1 Method of test at room temperature
    • ISO 6892-2 Method of test at elevated temperature
    • ISO 6892-3 Method of test at low temperature
    • ISO 6892-4 Method of test in liquid helium
  • ISO 6926:2016 Acoustics – Requirements for the performance and calibration of reference sound sources used for the determination of sound power levels
  • ISO 6927:2012 Buildings and civil engineering works – Sealants – Vocabulary
  • ISO 6929:2013 Steel products – Vocabulary
  • ISO 6936:1988 Information processing - Conversion between the two coded character sets of ISO 646 and ISO 6937-2 and the CCITT international telegraph alphabet No. 2 (ITA 2)
  • ISO/IEC 6937:2001 Information technology - Coded graphic character set for text communication - Latin alphabet
  • ISO 6938:2012 Textiles – Natural fibres – Generic names and definitions
  • ISO 6946 Building components and building elements – Thermal resistance and thermal transmittance – Calculation method
  • ISO 6951:1986 Information processing - Processor system bus interface (Eurobus A)
  • ISO 6974-1:2012 Natural gas — Determination of composition and associated uncertainty by gas chromatography Part 1: General guidelines and calculation of composition
  • ISO 6974-2:2012 Natural gas — Determination of composition and associated uncertainty by gas chromatography Part 2: Uncertainty calculations
  • ISO 6974-3:2001 Natural gas — Determination of composition with defined uncertainty by gas chromatography — Part 3: Determination of hydrogen, helium, oxygen, nitrogen, carbon dioxide and hydrocarbons up to C8 using two packed columns
  • ISO 6974-4:2001 Natural gas — Determination of composition with defined uncertainty by gas chromatography — Part 4: Determination of nitrogen, carbon dioxide and C1 to C5 and C6+ hydrocarbons for a laboratory and on-line measuring system using two columns
  • ISO 6974-5:2001 Natural gas — Determination of composition with defined uncertainty by gas chromatography — Part 5: Determination of nitrogen, carbon dioxide and C1 to C5 and C6+ hydrocarbons for a laboratory and on-line process application using three columns
  • ISO 6974-6: 2008 Natural gas — Determination of composition with defined uncertainty by gas chromatography — Part 6: Determination of hydrogen, helium, oxygen, nitrogen, carbon dioxide and C1 to C8 hydrocarbons using three capillary columns
  • ISO 6980 Nuclear energy - Reference beta-particle radiation
    • ISO 6980-1:2006 Part 1: Methods of production
    • ISO 6980-2:2004 Part 2: Calibration fundamentals related to basic quantities characterizing the radiation field
    • ISO 6980-3:2006 Part 3: Calibration of area and personal dosemeters and the determination of their response as a function of beta radiation energy and angle of incidence
  • ISO 7000:2014 Graphical symbols for use on equipment - Registered symbols
  • ISO 7001:2007 Graphical symbols – Public information symbols
  • ISO 7002 Agricultural food products – Layout for a standard method of sampling from a lot
  • ISO 7010:2011 Graphical symbols - Safety colours and safety signs - Registered safety signs
  • ISO 7029:2017 Acoustics - Statistical distribution of hearing thresholds related to age and gender
  • ISO 7056:1981 Plastics laboratory ware – Beakers
  • ISO/IEC 7064:2003 Information technology - Security techniques - Check character systems
  • ISO 7065 Information processing – Data interchange on 200 mm (8 in) flexible disk cartridges using modified frequency modulation recording at 13 262 ftprad, 1,9 tpmm (48 tpi), on both sides
    • ISO 7065-1:1985 Part 1: Dimensional, physical and magnetic characteristics
    • ISO 7065-2:1985 Part 2: Track format
  • ISO 7066 Assessment of uncertainty in the calibration and use of flow measurement devices
    • ISO 7066-2:1988 Part 2: Non-linear calibration relationships
  • ISO 7078:1985 Building construction – Procedures for setting out, measurement and surveying – Vocabulary and guidance notes
  • ISO 7083:1983 Technical drawings – Symbols for geometrical tolerancing – Proportions and dimensions
  • ISO 7087:1984 Ferroalloys - Experimental methods for the evaluation of the quality variation and methods for checking the precision of sampling
  • ISO 7088:1981 Fish-meal – Vocabulary
  • ISO 7089:2000 Plain washers — Normal series — Product grade A
  • ISO 7090:2000 Plain washers, chamfered — Normal series — Product grade A
  • ISO 7091:2000 Plain washers — Normal series — Product grade C
  • ISO 7092:2000 Plain washers — Small series — Product grade A
  • ISO 7093:2000 Plain washers — Large series
  • ISO 7098:2015 Information and documentation – Romanization of Chinese
  • ISO 7112:2017 Machinery for forestry – Portable brush-cutters and grass-trimmers – Vocabulary
  • ISO 7130:2013 Earth-moving machinery – Operator training – Content and methods
  • ISO 7131:2009 Earth-moving machinery – Loaders – Terminology and commercial specifications
  • ISO 7132:2003 Earth-moving machinery – Dumpers – Terminology and commercial specifications
  • ISO 7133:2013 Earth-moving machinery – Scrapers – Terminology and commercial specifications
  • ISO 7134:2013 Earth-moving machinery – Graders – Terminology and commercial specifications
  • ISO 7135:2009 Earth-moving machinery – Hydraulic excavators – Terminology and commercial specifications
  • ISO 7136:2006 Earth-moving machinery – Pipelayers – Terminology and commercial specifications
  • ISO 7137:1995 Aircraft - Environmental conditions and test procedures for airborne equipment
  • ISO 7144:1986 Documentation – Presentation of theses and similar documents
  • ISO 7151:1988 Surgical instruments – Non-cutting, articulated instruments – General requirements and test methods
  • ISO 7152:1997 Camping tents and caravan awnings – Vocabulary and list of equivalent terms
  • ISO 7153 Surgical instruments – Materials
    • ISO 7153-1:2016 Part 1: Metals
  • ISO 7154:1983 Documentation - Bibliographic filing principles
  • ISO 7176 Wheelchairs
    • ISO 7176-21:2009 Part 21: Requirements and test methods for electromagnetic compatibility of electrically powered wheelchairs and scooters, and battery chargers
    • ISO 7176-26:2007 Part 26: Vocabulary
  • ISO 7185:1990 Information technology - Programming languages - Pascal
  • ISO 7194:2008 Measurement of fluid flow in closed conduits – Velocity-area methods of flow measurement in swirling or asymmetric flow conditions in circular ducts by means of current-meters or Pitot static tubes
  • ISO 7196:1995 Acoustics – Frequency-weighting characteristic for infrasound measurements
  • ISO 7197:2006 Neurosurgical implants – Sterile, single-use hydrocephalus shunts and components
  • ISO 7198:2016 Cardiovascular implants and extracorporeal systems – Vascular prostheses – Tubular vascular grafts and vascular patches
  • ISO 7199:2016 Cardiovascular implants and artificial organs – Blood-gas exchangers (oxygenators)
  • ISO 7200:2004 Technical product documentation – Data fields in title blocks and document headers
  • ISO 7206 Implants for surgery – Partial and total hip joint prostheses
    • ISO 7206-1:2008 Part 1: Classification and designation of dimensions
    • ISO 7206-2:2011 Part 2: Articulating surfaces made of metallic, ceramic and plastics materials
    • ISO 7206-4:2010 Part 4: Determination of endurance properties and performance of stemmed femoral components
    • ISO 7206-6:2013 Part 6: Endurance properties testing and performance requirements of neck region of stemmed femoral components
    • ISO 7206-10:2003 Part 10: Determination of resistance to static load of modular femoral heads
    • ISO 7206-12:2016 Part 12: Deformation test method for acetabular shells
    • ISO 7206-13:2016 Part 13: Determination of resistance to torque of head fixation of stemmed femoral components
  • ISO 7207 Implants for surgery – Components for partial and total knee joint prostheses
    • ISO 7207-1:2007 Part 1: Classification, definitions and designation of dimensions
    • ISO 7207-2:2011 Part 2: Articulating surfaces made of metal, ceramic and plastics materials
  • ISO 7216:2015 Agricultural and forestry tractors – Measurement of noise emitted when in motion
  • ISO 7218:2007 Microbiology of food and animal feeding stuffs – General requirements and guidance for microbiological examinations
  • ISO 7220:1996 Information and documentation - Presentation of catalogues of standards
  • ISO 7237:1993 Caravans – Masses and dimensions – Vocabulary
  • ISO 7240 Fire detection and alarm systems
  • ISO 7251:2005 Microbiology of food and animal feeding stuffs – Horizontal method for the detection and enumeration of presumptive Escherichia coli – Most probable number technique
  • ISO 7255:1985 Shipbuilding – Active control units of ships – Vocabulary
  • ISO 7275:1985 Documentation – Presentation of title information of series
  • ISO 7287:2002 Graphical symbols for thermal cutting equipment
  • ISO 7294:1983 Saw teeth for woodworking saws – Profile shape – Terminology and designation
  • ISO 7296 Cranes - Graphic symbols
    • ISO 7296-1:1991 Part 1: General
    • ISO 7296-2:1996 Part 2: Mobile cranes
    • ISO 7296-3:2006 Part 3: Tower cranes
  • ISO 7297:1985 Information processing – Magnetic disk for data storage devices – 96 000 flux transitions per track, 200 mm (7.9 in) outer diameter, 63,5 mm (2.5 in) inner diameter
  • ISO 7298:1985 Information processing – Magnetic disk for data storage devices – 158 000 flux transitions per track, 210 mm (8.3 in) outer diameter, 100 mm (3.9 in) inner diameter
  • ISO 7345:1987 Thermal insulation – Physical quantities and definitions
  • ISO 7347:1987 Ferroalloys - Experimental methods for checking the bias of sampling and sample preparation
  • ISO 7348:1992 Glass containers – Manufacture – Vocabulary
  • ISO/IEC 7350:1991 Information technology - Registration of repertoires of graphic characters from ISO/IEC 10367
  • ISO 7369:2004 Pipework - Metal hoses and hose assemblies - Vocabulary
  • ISO 7372:2005 Trade data interchange - Trade data elements directory
  • ISO 7373:1987 Ferroalloys - Experimental methods for checking the precision of sample division
  • ISO 7376:2009 Anaesthetic and respiratory equipment – Laryngoscopes for tracheal intubation
  • ISO 7380 Button Head Screws
    • ISO 7380-1:2011 Part 1: Hexagon socket button head screws
    • ISO 7380-2:2011 Part 2: Hexagon socket button head screws with collar
  • ISO 7396 Medical gas pipeline systems
    • ISO 7396-1:2016 Part 1: Pipeline systems for compressed medical gases and vacuum
    • ISO 7396-2:2007 Part 2: Anaesthetic gas scavenging disposal systems
  • ISO 7404 Methods for the petrographic analysis of coals
    • ISO 7404-1:2016 Part 1: Vocabulary
  • ISO 7437:1990 Technical drawings – Construction drawings – General rules for execution of production drawings for prefabricated structural components
  • ISO 7462:1985 Shipbuilding - Principal ship dimensions - Terminology and definitions for computer applications
  • ISO 7478:1987 Information processing systems – Data communication – Multilink procedures
  • ISO 7479:1982 Textile machinery and accessories — Metal reeds with plastic baulk [Withdrawn: replaced with ISO 366-4]
  • ISO/IEC 7480:1991 Information technology – Telecommunications and information exchange between systems – Start-stop transmission signal quality at DTE/DCE interfaces
  • ISO 7482 Raw goat skins
    • ISO 7482-1:1998 Part 1: Descriptions of defects
  • ISO/IEC 7487 Information technology – Data interchange on 130 mm (5,25 in) flexible disk cartridges using modified frequency modulation recording at 7 958 ftprad, 1,9 tpmm (48 tpi), on both sides – ISO type 202
    • ISO/IEC 7487-1:1993 Part 1: Dimensional, physical and magnetic characteristics
    • ISO 7487-2:1985 Part 2: Track format A
    • ISO 7487-3:1986 Part 3: Track format B
  • ISO 7489:1986 Dental glass polyalkenoate cements [Withdrawn: replaced with ISO 9917]
  • ISO/IEC 7498 Information technology — Open Systems Interconnection — Basic Reference Model[Note 3]
    • ISO/IEC 7498-1:1994 The Basic Model
    • ISO 7498-2:1989 Part 2: Security Architecture
    • ISO/IEC 7498-3:1997 Naming and addressing
    • ISO/IEC 7498-4:1989 Part 4: Management framework
  • ISO/IEC 7501 Identification cards – Machine readable travel documents
  • ISO 7504:2015 Gas analysis – Vocabulary
  • ISO 7518:1983 Technical drawings – Construction drawings – Simplified representation of demolition and rebuilding
  • ISO 7519:1991 Technical drawings – Construction drawings – General principles of presentation for general arrangement and assembly drawings
  • ISO 7520:1985 Ferronickel - Determination of cobalt content - Flame atomic absorption spectrometric method
  • ISO 7524:1985 Nickel, ferronickel and nickel alloys - Determination of carbon content - Infra-red absorption method after induction furnace combustion
  • ISO 7526:1985 Nickel, ferronickel and nickel alloys - Determination of sulfur content - Infra-red absorption method after induction furnace combustion
  • ISO 7527:1985 Nickel, ferronickel and nickel alloys - Determination of sulfur content - Iodimetric titration method after induction furnace combustion
  • ISO 7550:1985 Laboratory glassware – Disposable micropipettes
  • ISO 7563:1998 Fresh fruits and vegetables – Vocabulary
  • ISO 7568:1986 Woodworking machines – Thickness planing machines with rotary cutterblock for one-side dressing – Nomenclature and acceptance conditions
  • ISO 7569:1986 Woodworking machines – Planing machines for two-, three- or four-side dressing – Nomenclature and acceptance conditions
  • ISO 7570:1986 Woodworking machines – Surface planing and thicknessing machines – Nomenclature and acceptance conditions
  • ISO 7571:1986 Woodworking machines – Surface planing machines with cutterblock for one-side dressing – Nomenclature and acceptance conditions
  • ISO 7573:2008 Technical product documentation – Parts lists
  • ISO 7574 Acoustics – Statistical methods for determining and verifying stated noise emission values of machinery and equipment
    • ISO 7574-1:1985 Part 1: General considerations and definitions
    • ISO 7574-2:1985 Part 2: Methods for stated values for individual machines
    • ISO 7574-3:1985 Part 3: Simple (transition) method for stated values for batches of machines
    • ISO 7574-4:1985 Part 4: Methods for stated values for batches of machines
  • ISO 7583:2013 Anodizing of aluminium and its alloys - Terms and definitions
  • ISO 7626 Mechanical vibration and shock – Experimental determination of mechanical mobility[Note 3]
    • ISO 7626-1:2011 Part 1: Basic terms and definitions, and transducer specifications
    • ISO 7626-2:2015 Part 2: Measurements using single-point translation excitation with an attached vibration exciter
    • ISO 7626-5:1994 Part 5: Measurements using impact excitation with an exciter which is not attached to the structure
  • ISO 7637 Road vehicles – Electrical disturbances from conduction and coupling
    • ISO 7637-1:2015 Part 1: Definitions and general considerations
  • ISO 7639:1985 Road vehicles - Diagnostic systems - Graphical symbols
  • ISO 7665:1983 Information processing – File structure and labelling of flexible disk cartridges for information interchange
  • ISO 7692:1983 Ferrotitanium - Determination of titanium content - Titrimetric method
  • ISO 7693:1984 Ferrotungsten - Determination of tungsten content - Cinchonine gravimetric method
  • ISO 7704:1985 Water quality – Evaluation of membrane filters used for microbiological analyses
  • ISO 7711 Dentistry – Diamond rotary instruments
    • ISO 7711-3:2004 Part 3: Grit sizes, designation and colour code
  • ISO 7712:1983 Laboratory glassware – Disposable Pasteur pipettes
  • ISO 7736 Road vehicles – Car radio for front installation – Installation space including connections
  • ISO 7740:1985 Instruments for surgery – Scalpels with detachable blades – Fitting dimensions
  • ISO 7741:1986 Instruments for surgery – Scissors and shears – General requirements and test methods
  • ISO/IEC 7776:1995 Information technology – Telecommunications and information exchange between systems – High-level data link control procedures – Description of the X.25 LAPB-compatible DTE data link procedures
  • ISO 7779:2010 Acoustics - Measurement of airborne noise emitted by information technology and telecommunications equipment
  • ISO/IEC 7810 Identification cards – Physical characteristics
  • ISO/IEC 7811 Identification cards – Recording technique
  • ISO/IEC 7812 Identification cards – Identification of issuers
  • ISO/IEC 7813:2006 Information technology – Identification cards – Financial transaction cards
  • ISO/IEC 7816 Identification cards – Integrated circuit cards[Note 3]
  • ISO 7830:1983 Photography — Safety photographic films other than motion picture films — Material specifications Withdrawn: replaced with ISO 543, later ISO 18906
  • ISO 7839:2005 Textile machinery and accessories – Knitting machines – Vocabulary and classification
  • ISO/TS 7849 Acoustics – Determination of airborne sound power levels emitted by machinery using vibration measurement
    • ISO/TS 7849-1:2009 Part 1: Survey method using a fixed radiation factor
    • ISO/TS 7849-2:2009 Part 2: Engineering method including determination of the adequate radiation factor
  • ISO 7863:1984 Height setting micrometers and riser blocks
  • ISO 7864:2016 Sterile hypodermic needles for single use – Requirements and test methods
  • ISO 7870 Control charts
    • ISO 7870-1:2014 Part 1: General guidelines
    • ISO 7870-2:2013 Part 2: Shewhart control charts
    • ISO 7870-3:2012 Part 3: Acceptance control charts
    • ISO 7870-4:2011 Part 4: Cumulative sum charts
    • ISO 7870-5:2014 Part 5: Specialized control charts
    • ISO 7870-6:2016 Part 6: EWMA control charts
    • ISO 7870-8:2017 Part 8: Charting techniques for short runs and small mixed batches
  • ISO 7876 Fuel injection equipment – Vocabulary
    • ISO 7876-1:1990 Part 1: Fuel injection pumps
    • ISO 7876-2:1991 Part 2: Fuel injectors
    • ISO 7876-3:1993 Part 3: Unit injectors
    • ISO 7876-4:2004 Part 4: High-pressure pipes and end-connections
    • ISO 7876-5:2004 Part 5: Common rail fuel injection system
  • ISO 7885:2010 Dentistry – Sterile injection needles for single use
  • ISO 7886 Sterile hypodermic syringes for single use
    • ISO 7886-1:2017 Part 1: Syringes for manual use
    • ISO 7886-2:1996 Part 2: Syringes for use with power-driven syringe pumps
    • ISO 7886-3:2005 Part 3: Auto-disable syringes for fixed-dose immunization
    • ISO 7886-4:2006 Part 4: Syringes with re-use prevention feature
  • ISO 7889:2003 Yogurt – Enumeration of characteristic microorganisms – Colony-count technique at 37 degrees C
  • ISO 7899 Water quality – Detection and enumeration of intestinal enterococci
    • ISO 7899-1:1998 Part 1: Miniaturized method (Most Probable Number) for surface and waste water
    • ISO 7899-2:2000 Part 2: Membrane filtration method
  • ISO 7919 Mechanical vibration – Evaluation of machine vibration by measurements on rotating shafts
    • ISO 7919-3:2009 Part 3: Coupled industrial machines
    • ISO 7919-4:2009 Part 4: Gas turbine sets with fluid-film bearings
    • ISO 7919-5:2005 Part 5: Machine sets in hydraulic power generating and pumping plants
  • ISO 7929:1985 Information processing – Magnetic disk for data storage devices – 83 000 flux transitions per track, 130 mm (5.12 in) outer diameter, 40 mm (1.57 in) inner diameter
  • ISO 7932:2004 Microbiology of food and animal feeding stuffs – Horizontal method for the enumeration of presumptive Bacillus cereus – Colony-count technique at 30 degrees C
  • ISO 7937:2004 Microbiology of food and animal feeding stuffs – Horizontal method for the enumeration of Clostridium perfringens – Colony-count technique
  • ISO/IEC 7942 Information technology – Computer graphics and image processing – Graphical Kernel System (GKS)
  • ISO 7944:1998 Optics and optical instruments - Reference wavelengths
  • ISO 7945:1985 Woodworking machines – Single spindle boring machines – Nomenclature and acceptance conditions
  • ISO 7946:1985 Woodworking machines – Slot mortising machines – Nomenclature and acceptance conditions
  • ISO 7947:1985 Woodworking machines – Two-, three- and four-side moulding machines – Nomenclature and acceptance conditions
  • ISO 7948:1987 Woodworking machines – Routing machines – Nomenclature and acceptance conditions
  • ISO 7949:1985 Woodworking machines – Veneer pack edge shears – Nomenclature and acceptance conditions
  • ISO 7950:1985 Woodworking machines – Single chain mortising machines – Nomenclature and acceptance conditions
  • ISO 7957:1987 Woodworking machines – Radial circular saws – Nomenclature and acceptance conditions
  • ISO 7958:1987 Woodworking machines – Single blade stroke circular sawing machines for lengthwise cutting of solid woods and panels – Nomenclature and acceptance conditions
  • ISO 7959:1987 Woodworking machines – Double edging precision circular sawing machines – Nomenclature and acceptance conditions
  • ISO 7960:1995 Airborne noise emitted by machine tools – Operating conditions for woodworking machines
  • ISO 7967 Reciprocating internal combustion engines - Vocabulary of components and systems
    • ISO 7967-1:2005 Part 1: Structure and external covers
    • ISO 7967-2:2010 Part 2: Main running gear
    • ISO 7967-3:2010 Part 3: Valves, camshaft drives and actuating mechanisms
    • ISO 7967-4:2005 Part 4: Pressure charging and air/exhaust gas ducting systems
    • ISO 7967-5:2010 Part 5: Cooling systems
    • ISO 7967-6:2005 Part 6: Lubricating systems
    • ISO 7967-7:2005 Part 7: Governing systems
    • ISO 7967-8:2005 Part 8: Starting systems
    • ISO 7967-9:2010 Part 9: Control and monitoring systems
    • ISO 7967-10:2014 Part 10: Ignition systems
    • ISO 7967-11:2014 Part 11: Fuel systems
    • ISO 7967-12:2014 Part 12: Exhaust emission control systems
  • ISO 7983:1988 Woodworking machines – Single blade circular sawing machines with travelling table – Nomenclature and acceptance conditions
  • ISO 7987:1985 Woodworking machines – Turning lathes – Nomenclature and acceptance conditions
  • ISO 7988:1988 Woodworking machines – Double-end tenoning machines – Nomenclature and acceptance conditions
  • ISO 7998:2005 Ophthalmic optics - Spectacle frames - Lists of equivalent terms and vocabulary

Notes

edit
  1. ^ This list generally excludes draft versions.
  2. ^ ISO deliverables include "specifications" (ISO/PAS, ISO/TS), "reports" (ISO/TR), etc, which are not referred to by ISO as "standards".
  3. ^ a b c d e f g h The exact wording of this title varies between parts. This is the wording of the most recently published part.

References

edit
  1. ^ "Standards catalogue". ISO.
  2. ^ "Freely Available Standards". ISO.
  3. ^ ISO, ISO 6780:2003 Flat pallets for intercontinental materials handling — Principal dimensions and tolerances, accessed 27 October 2019
edit
Retrieved from "https://en.wiki.x.io/w/index.php?title=List_of_ISO_standards_5000–7999&oldid=1225763632"