The High Resolution Coronal Imager (Hi-C) is a sub-orbital telescope designed to take high-resolution images of the Sun's corona. As of 2020[update] it has been launched three times, but only the first and the third launches, on July 11, 2012, and May 29, 2018, resulted in a successful mission.[1] It was launched aboard a Black Brant sounding rocket from White Sands Missile Range, New Mexico.[2] The images taken were the highest resolution photos ever of the Sun's corona.[3]
![](http://up.wiki.x.io/wikipedia/commons/thumb/9/92/A_photo_with_the_payload_before_loading_the_instrument_in_a_pair_of_U.S._Army_Helicopters.jpg/350px-A_photo_with_the_payload_before_loading_the_instrument_in_a_pair_of_U.S._Army_Helicopters.jpg)
Telescope description
editThe telescope weighs 464 pounds (210 kg), and is 10 feet (3.0 m) long.[3] The mirrors are approximately 9.5 inches (24 cm) across. Its optics were designed at the Marshall Space Flight Center in Huntsville, Alabama with assistance from the Smithsonian Astrophysical Observatory and L-3Com/Tinsley Laboratories of Richmond, California. Dr. Jonathan Cirtain, from MSFC said: "These mirrors were to be the finest pieces of glass ever fabricated for solar astrophysics."[4]
Imaging system
editThe imaging system was designed by Apogee Imaging Systems with a resolution of 0.1 arcsec/pixel (14 times higher resolution than the Solar Dynamics Observatory). It was based on a customized version of the E2V CCD203 from Lockheed Martin, which is a very large 4 channel back illuminated 4,000 × 4,000 pixel charge-coupled device (CCD).[2]
Missions
editThe first flight lasted for 10 minutes, reached an altitude of 283 kilometres (176 mi) and the telescope captured 165 images of a large active region. It imaged the Sun in ultraviolet light at 19.3 nm wavelength.[5] The total cost of the mission was $5 million.[6]
On the second flight, in 2018, five and a half minutes (329 seconds) of pictures were taken of an area on the sun 4.4 arcminutes square (the sun's disk being about 30 arcminutes in diameter). Seventy eight images were taken at intervals of 4.4 seconds, with a two-second exposure time, at the extreme ultraviolet wavelength of 17.2 nanometres which is dominated by Fe IX emission (emission from iron in the +8 ionization state) indicating temperatures around 800 000 Kelvin. The instrument was able to resolve strands of plasma as narrow as about 200 kilometres wide.
Findings
editThe first mission revealed never-before-seen "magnetic braids" of plasma roiling in the Sun's outer layers.[3] It was the first time scientists were able to directly observe magnetic reconnection in braids, which may be the primary sources of heating in the active solar corona.[5][7]
References
edit- ^ Thomas Williams; et al. (Apr 7, 2020). "Is the High-Resolution Coronal Imager Resolving Coronal Strands? Results from AR 12712". The Astrophysical Journal. 892 (2): 134. arXiv:2001.11254. Bibcode:2020ApJ...892..134W. doi:10.3847/1538-4357/ab6dcf.
- ^ a b "NASA HIC". Apogee Imaging Systems. Retrieved February 9, 2013.
- ^ a b c "NASA Telescope Observes How Sun Stores and Releases Energy". NASA. January 23, 2013. Retrieved January 24, 2013.
- ^ "'Hi-C' Mission Sees Energy in the Sun's Corona". NASA. January 23, 2013. Retrieved January 24, 2013.
- ^ a b "High-Resolution Coronal Imager Photographs the Sun in UV Light at 19.3nm Wavelength". AZonano.com. January 24, 2013. Retrieved February 9, 2013.
- ^ Clara Moskowitz (January 23, 2013). "How NASA Revealed Sun's Hottest Secret in 5-Minute Spaceflight". Space.com. Retrieved January 24, 2013.
- ^ Cirtain, J. W.; Golub, L.; Winebarger, A. R.; De Pontieu, B.; Kobayashi, K.; Moore, R. L.; Walsh, R. W.; Korreck, K. E.; Weber, M.; McCauley, P.; Title, A.; Kuzin, S.; Deforest, C. E. (2013). "Energy release in the solar corona from spatially resolved magnetic braids". Nature. 493 (7433): 501–503. Bibcode:2013Natur.493..501C. doi:10.1038/nature11772. PMID 23344359. S2CID 205232074.