GS&WR Class 500

Specifications
Specifications
Configuration:;
• Whyte	4-6-0
Gauge	5 ft 3 in (1,600 mm)
Leading dia.	3 ft 0 in (910 mm)
Driver dia.	5 ft 8+1⁄2 in (1,740 mm)
Wheelbase:
• Engine	37 ft 1+1⁄4 in (11,309 mm)
Loco weight	74.5 long tons (75.7 t)

Type and origin
Type and origin
Power type	Steam
Designer	J. R. Bazin
Builder	Inchicore Works
Build date	1924—1926
Total produced	3

GS&WR 500 Class
GS&WR 500 Class
Power type
Type and origin
Power type	Steam
Designer	J. R. Bazin
Builder	Inchicore Works
Build date	1924—1926
Total produced	3
Configuration:;
Specifications
Configuration:;
• Whyte	4-6-0
Gauge	5 ft 3 in (1,600 mm)
Leading dia.	3 ft 0 in (910 mm)
Driver dia.	5 ft 8+1⁄2 in (1,740 mm)
Wheelbase:
• Engine	37 ft 1+1⁄4 in (11,309 mm)
Loco weight	74.5 long tons (75.7 t)
Operators
Career
Operators	Great Southern & Western Railway (GW&SR); Great Southern Railways (GSR); CIÉ
Power class	B1
Number in class	3
Numbers	500—502
Locale	Ireland
Withdrawn	1955—1957

The Great Southern and Western Railway (GS&WR) Class 500 were 4-6-0 locomotives intended for mixed-traffic work. The lead member of the class was built in 1924 under the GS&WR, the remaining two in 1926 under the amalgamated grouping of the Great Southern Railways (GSR).^[2]^{: 245–246}

Design

The locomotive was designed by J. R. Bazin who sought to avoid some issues with the unrebuilt GS&WR 400 Class and was aimed at being a mixed-traffic type. Use of a valve travel of 6+3⁄4 inches (170 mm) and a 1+1⁄2 inches (38 mm) lap was a significant contributor to the performance of the type. The boiler was interchangeable with the existing GS&WR 400 Class. ^[2]^{: 245–246}

Service

Although a mixed-traffic type the engines could and were often used on passenger services which were the domain of the GS&WR 400 Class. It was pointed out in a 1948 report their smaller wheels made them unsuitable for that work and they should be allocated to goods and night mails.^[2]^{: 245–246}

Livery

The locomotives were painted in Standard GS&WR/GSR Livery.

Model

A model by C.R.H Wilson at 1:8 scale ratio was held by the Thinktank museum in Birmingham, United Kingdom. As of 2008^[update] it was not on display. Construction for the model began in 1929 and took over 10 years. Whilst capable of live steam it is understood not to have been steamed because of the extreme detailing of the model for the period. There is a story Wilson chose this locomotive as only Bazin was prepared to provide him with drawings of the required detail, whilst other railway companies in the United Kingdom were not prepared to do so.^[2]^: 380

References

^ Boocock, Colin (1 October 2009). "Locomotive Compendium Ireland" (1st ed.). Ian Allan. p. 14. ISBN 9780711033603.
^ ^a ^b ^c ^d Clements, Jeremy; McMahon, Michael (2008). Locomotives of the GSR. Colourpoint Books. ISBN 9781906578268.

[CB-B1-1] Boocock, Colin (1 October 2009). "Locomotive Compendium Ireland" (1st ed.). Ian Allan. p. 14. ISBN 9780711033603.

[JCMM-500-2] Clements, Jeremy; McMahon, Michael (2008). Locomotives of the GSR. Colourpoint Books. ISBN 9781906578268.

[2]

[1]