Detrital zircon geochronology is the science of analyzing the age of zircons deposited within a specific sedimentary unit by examining their inherent radioisotopes, most commonly the uranium–lead ratio. Zircon is a common accessory or trace mineral constituent of most granite and felsic igneous rocks. Due to its hardness, durability and chemical inertness, zircon persists in sedimentary deposits and is a common constituent of most sands. Zircons contain trace amounts of uranium and thorium and can be dated using several modern analytical techniques.
![](http://up.wiki.x.io/wikipedia/commons/thumb/9/9c/ZirconUSGOV.jpg/336px-ZirconUSGOV.jpg)
Detrital zircon geochronology has become increasingly popular in geological studies from the 2000s mainly due to the advancement in radiometric dating techniques.[1][2] Detrital zircon age data can be used to constrain the maximum depositional age, determine provenance,[3] and reconstruct the tectonic setting on a regional scale.[4]
Detrital zircon
editOrigin
editDetrital zircons are part of the sediment derived from weathering and erosion of pre-existing rocks. Since zircons are heavy and highly resistant at Earth's surface,[5] many zircons are transported, deposited and preserved as detrital zircon grains in sedimentary rocks.[3]
Properties
editDetrital zircons usually retain similar properties as their parent igneous rocks, such as age, rough size and mineral chemistry.[6][7] However, the composition of detrital zircons is not entirely controlled by the crystallization of the zircon mineral. In fact, many of them are modified by later processes in the sedimentary cycle. Depending on the degree of physical sorting, mechanical abrasion and dissolution, a detrital zircon grain may lose some of its inherent features and gain some over-printed properties like rounded shape and smaller size.[5] On a larger scale, two or more tribes of detrital zircons from different origins may deposit within the same sedimentary basin. This give rise to a natural complexity of associating detrital zircon populations and their sources.[3]
Zircon is a strong tool for uranium-lead age determination because of its inherent properties:[8]
- Zircon contains high amount of uranium for machine recognition, commonly 100–1000 ppm.[8]
- Zircon has a low amount of lead during crystallization, in parts per trillion.[8] Thus, lead found in zircon can be assumed as daughter nuclei from parent uranium.
- Zircon crystals grow between 600 and 1100 °C, while lead is retained within the crystal structure below 800 °C (see Closure temperature). So once zircon has cooled below 800 °C it retains all the lead from the radioactive decay. Therefore, U-Pb age can be treated as the age of crystallization,[8] if the mineral/sample itself has not undergone high temperature metamorphism after formation.
- Zircon commonly crystallizes in felsic igneous rocks, with greater than 60% silica (SiO2) content.[4] These rocks are generally less dense and more buoyant. They sit high in the Earth's (continental crust), and have good preservation potential.
- Zircon is physically and chemically resistant, so it is more likely to be preserved in the sedimentary cycle.[8]
- Zircon contains other elements which gives supplementary information, such as hafnium (Hf), uranium/thorium (U/Th) ratio.[8]
Sample collection
editThere are no set rules for sample selection in detrital zircon geochronology studies. The objective and scale of the research project govern the type and number of samples taken. In some cases, the sedimentary rock type and depositional setting can significantly affect the result.[3] Examples include:
- Matured quartz arenite within Vlamy Formation yield older and more diverse ages given by well-rounded detrital zircons, which may correlate to multiple sedimentary reworking events. On the contrary, Harmony Formation in the same region has younger and homogenous ages given by euhedral detrital zircons. These two formations illustrate the possibility of relating sedimentary maturity with resulting zircon ages, meaning that rounded and well-sorted sedimentary rocks (e.g. siltstone and mudstone) may have older and more diverse ages.[9]
- Turbidites in Harts Pass Formation contain homogenous detrital zircons ages. On the other hand, fluvial Winthrop Formation in another strata of the same basin has various detrital zircon age populations. Comparing the vertical detrital zircon distribution within these two formations, one can expect a narrower age population of detrital zircons from rocks which are rapidly deposited, such as turbidites. Rocks that are gradually deposited (e.g. marine mudstone), however, have a greater chance and time to incorporate zircon sediments from different localities.[10]
Detrital zircon extraction
editAfter rock samples are collected, they are cleaned, chipped, crushed and milled through standardized procedures. Then, detrital zircons are separated from the fine rock powder by three different ways, namely gravity separation using water, magnetic separation, and gravity separation using heavy liquid.[11] In the process, grains are also sieved according to their size. The commonly used grain size for detrital zircon provenance analysis is 63–125 μm, which is equivalent to fine sand grain size.[12]
Type of detrital zircon analysis
editThere are two main types of detrital zircon analysis: qualitative analysis and quantitative analysis. The biggest advantage of qualitative analysis is being able to uncover all possible origin of the sedimentary unit, whereas quantitative analysis should allow meaningful comparison of proportions in the sample.[3]
Qualitative analysis
editQualitative approach examines all the available detrital zircons individually regardless of their abundance among all grains.[13][14] This approach is usually conducted with high precision thermal ionization mass spectrometry (TIMS) and sometimes secondary ion mass spectrometry (SIMS).[3] Optical examination and classification of detrital zircon grains are commonly included in qualitative studies through back-scatter electrons (BSE) or cathodoluminescence (CL) imagery,[3] despite the relationship between the age and optical classification of detrital zircon grains is not always reliable.[15]
Quantitative analysis
editQuantitative approach requires large number of grain analyses within a sample rock in order to represent the overall detrital zircon population[3] statistically (i.e. the total number of analyses should achieve an appropriate level of confidence).[16] Because of the large sample size, secondary ion mass spectrometry (SIMS) and laser ablation-inductively coupled plasma mass spectrometry (LA-ICPMS) are used instead of thermal ionization mass spectrometry (TIMS). In this case, BSE and CL imagery are applied to select the best spot on a zircon grain for acquiring reliable age.[17]
Methods
editDifferent methods in detrital zircon analysis yield different results. Generally, researchers would include the methods/ analytical instruments they used within their studies. There are generally three categories, which are the instrument(s) used for zircon analysis, their calibration standards and instrument(s) used for zircon imagery. Details are listed in Table 1.
Table 1. Different types of analytical methods in detrital zircon study[18][19] | |||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Type of instrument for zircon analysis | In modern research, common instruments for U-Pb analysis are sensitive high-resolution ion microprobe (SHRIMP), inductively coupled plasma mass spectrometry (LA-ICPMS) and thermal ionization mass spectrometry (TIMS). Ion microprobe (non-SHRIMP) and lead-lead evaporation techniques were more commonly used in older research. | ||||||||||||||||||||
Zircon calibration standards | Basically analytical machines need to be calibrated before use. Scientists use age-similar (comparable to the sampled zircons) and accurate zircons as their machine calibration standards. Different calibration standards may give slight deviation of the resulting ages. For example, there are at least twelve different standards catering for different sample zircons in Arizona Laserchron Center, primarily using Sri Lanka zircon, followed by Oracle.[8] | ||||||||||||||||||||
Type of instrument for zircon imagery[18] |
|
Detrital zircon data
editDepending on the detrital zircon study, there should be different variables included for analysis. There are two main types of data, analyzed zircon data (quantifiable data and imagery/descriptive data), and sample (where they extract the zircon grains) data. Details are listed in Table 2.
Table 2. Different types of data in detrital zircon study[26][27] | |||||||
---|---|---|---|---|---|---|---|
Data | Explanation | ||||||
Analyzed zircon data | |||||||
Quantifiable data | |||||||
Grain Number | Grain number is necessary for multiple detrital zircon grains yielded within the same sample rock | ||||||
U content | Uranium content, usually in ppm. | ||||||
Th content | Thorium content, usually in ppm. | ||||||
Th/U ratio | Thorium content divided by uranium content. Most of the detrital zircon grain origins can be identified through Th/U ratio, where Th/U < 0.01 implies possible metamorphic origin and Th/U > 0.5 implies igneous origin. Intermediate origin lies between 0.01 and 0.5. | ||||||
207Pb/235U | Isotope ratios measured by instrument for further age calculation. | ||||||
206Pb/238U | |||||||
207Pb/206Pb | Obtained by calculation since 238U/235U is constant (137.82), i.e. | ||||||
206Pb/204Pb | Also measured to correct the amount of lead incorporated into the zircon during initial crystallization.[17] | ||||||
The three resulting ages and their uncertainties | Ages (Ma) are calculated with the associated decay constants, (see Uranium–lead dating)
*Refers to radiogenic isotopes, Where t is the required age, λ238 = 1.55125 x 10−10 and λ235 = 9.8485 x 10−10[30][31] Uncertainties are expressed as 1σ or 2σ ± value in age (Ma). | ||||||
%Concordance or %Discordance | Obtained by either comparing with the standard U-Pb Concordia or calculation:
| ||||||
Descriptive data (more common in qualitative analysis) | |||||||
Spot Number and nature | |||||||
Zircon morphology | Different zircon shape corresponds to different crystallization medium (chemistry and temperature). A general crystal shape classification would be:
Different elongation (defined by length-to-width ratio) corresponds to the zircon crystallization rate. The higher the ratio, the higher the crystallization speed.[18] In detrital zircons, however, zircon morphology may not be well-preserved because of the damage caused on zircon grains during weathering, erosion and transportation. It is common to have sub-rounded/rounded detrital zircons as opposed to prismatic igneous zircon. | ||||||
Zircon texture | Zircon texture generally refers to the outlook of zircon, specifically its oscillatory zoning pattern under BSE or CL imagery. Zircon with good zoning would have alternating dark and light rim growth. Dark rim is associated with zircon-rich but trace-element poor geochemistry and vice versa. The dark color can be results from the radioactive damage of uranium to the crystal structure. (see metamictization)[18]
Zircon growth zoning correlates magmatic melt condition, such as the crystal-melt interface, the melt's degree of saturation, the melt's ion diffusion rate and oxidation state.[18][34] These can be evidence for provenance studies, by correlating the zircon's melt condition with similar igneous province. | ||||||
Sample data | |||||||
Location | Longitude and latitude coordinates are often included in sample description so that spatial analysis can be conducted. | ||||||
Host rock lithology | Rock/ sediment type of the sample taken. They can be either lithified rocks (e.g. sandstone, siltstone and mudstone) or unconsolidated sediments (e.g. river sediments and placer deposits) | ||||||
Stratigraphic unit | For most of the surface geology has been explored, the sample collected may be within previously found formations or stratigraphic unit. Identifying the stratigraphic unit can correlate the sample with pre-existed literatures, which often give insights about the sample's origin. | ||||||
Host rock age | The age of sampled rock unit given by particular age determination method(s), which is not necessarily the youngest detrital zircon age/age population[35] | ||||||
Age determination method | Different age determination methods yield different host rock ages. Common methods include Biostratigraphy (fossil age within the host rock), dating igneous rocks cross-cutting the host rock strata, superposition in continuous stratigraphy, Magnetostratigraphy (finding the inherent magnetic polarities within the rock strata and correlate them with the global magnetic polarity time scale) and Chemostratigraphy (chemical variations within the host rock sample). (See Geochronology) | ||||||
Other information | |||||||
Sources | Original bibliography/citation of papers, if data is retrieved from other researchers. | ||||||
Past geological events | Large-scale geological events within the zircon crystallization-depositional ages, such as supercontinent cycle, may be useful for data interpretation. | ||||||
Paleo-climatic condition | The past climatic conditions (humidity and temperature) correlating the degree of rock weathering and erosion may be useful for data interpretation. |
Filtering detrital zircon data
editAll data acquired first-hand should be cleansed before using to avoid error, normally by computer.
By U-Pb age discordance
editBefore applying detrital zircon ages, they should be evaluated and screened accordingly. In most cases, data are compared with U-Pb Concordia graphically. For a large dataset, however, data with high U-Pb age discordance (>10 – 30%) are filtered out numerically. The acceptable discordance level is often adjusted with the age of the detrital zircon since older population should experience higher chances of alteration and project higher discordance.[19] (See Uranium–lead dating)
By choosing the best age
editBecause of the intrinsic uncertainties within the three yield U-Pb ages (207Pb/235U, 206Pb/238U and 207Pb/206Pb), the age at ~1.4 Ga has the poorest resolution. An overall consensus for age with higher accuracy is to adopt:
By data clustering
editGiven the possibility of concordant yet incorrect detrital zircon U-Pb ages associated with lead loss or inclusion of older components, some scientists apply data selection through clustering and comparing the ages. Three or more data overlapping within ±2σ uncertainty would be classified as a valid age population of a particular source origin.[19]
By age uncertainty (±σ)
editThere are no set limit for age uncertainty and the cut-off value varies with different precision requirement. Although excluding data with huge age uncertainty would enhance the overall zircon grain age accuracy, over elimination may lower overall research reliability (decrease in size of the database). The best practice would be to filter accordingly, i.e. setting the cut-off error to eliminate reasonable portion of the dataset (say <5% of the total ages available[6])
By applied analytical methods
editDepending on the required analytical accuracy, researchers may filter data via their analytical instruments. Generally, researchers use only the data from sensitive high-resolution ion microprobe (SHRIMP), inductively coupled plasma mass spectrometry (LA-ICPMS) and thermal ionization mass spectrometry (TIMS) because of their high precision (1–2%, 1–2% and 0.1% respectively[17]) in spot analysis. An older analytical technique, lead-lead evaporation,[37] is no longer used since it cannot determine the U-Pb concordance of the age data.[38]
By spot nature
editApart from analytical methods, researchers would isolate core or rim ages for analysis. Normally, core ages would be used as crystallization age as they are first generated and least disturbed part in zircon grains. On the other hand, rim ages can be used to track peak metamorphism as they are first in contact with certain temperature and pressure condition.[39] Researchers may utilize these different spot natures to reconstruct the geological history of a basin.
Application of detrital zircon ages
editMaximum depositional age
editSome of the most important information we can get from detrital zircon ages is the maximum depositional age of the referring sedimentary unit. The sedimentary unit cannot be older than the youngest age of the analyzed detrital zircons because the zircon should have existed before the rock formation. This provides useful age information to rock strata where fossils are unavailable, such as the terrestrial successions during Precambrian or pre-Devonian times.[3] Practically, maximum depositional age is averaged from a cluster of youngest age data or the peak in age probability because the youngest U-Pb age within a sample is almost always younger with uncertainty.[17]
Tectonic studies
editUsing detrital zircon age abundance
editIn a global scale, detrital zircon age abundance can be used as a tool to infer significant tectonic events in the past.[4] In Earth's history, the abundance of magmatic age peaks during periods of supercontinent assembly.[6] This is because supercontinent provides a major crustal envelop selectively preserve the felsic magmatic rocks, resulting from partial melts.[40] Thus, many detrital zircons originate from these igneous provence, resulting similar age peak records.[6] For instance, the peak at about 0.6–0.7 Ga and 2.7 Ga (Figure 6) may correlate the break-up of Rodinia and supercontinent Kenorland respectively.[26]
Using difference between detrital zircons crystallisation ages and their corresponding maximum depositional age
editApart from the detrital zircon age abundance, difference between detrital zircons crystallisation ages (CA) and their corresponding maximum depositional age (DA) can be plotted in cumulative distribution function to correlate particular tectonic regime in the past. The effect of different tectonic settings on the difference between CA and DA is illustrated in Figure 7 and summarized in Table. 3.[4]
Table 3. Variable detrital zircon record in different tectonic setting.[4] | |||
---|---|---|---|
Convergent Setting | Collisional Setting | Extensional Setting | |
Referred tectonic zone | Ocean-continent collision | Continent-continent collision | Spreading oceanic ridges |
Magmatic activities | Syn-sedimentary magmatic activities is likely with continuous subduction induced partial melts | Magma generation is enveloped within a thick lithosphere.[40] | Tectonically stable. Lack of syn-sedimentary magmatic generation[41] |
Associated basin | Arc-flanking basin | Foreland basin | Rift basin, passive margin |
Main detrital zircon sources | Fed by juvenile generations of volcanic/magmatic rocks | Fed by syn-collisional magmatism and old units caught in the orogen | Fed by a large range of pre-existing old terraines |
Resulting zircon record | Youngest detrital zircon grain is approximately the onset of sediment accumulation[35] | High, especially within periods of supercontinent | Youngest detrital zircon provide a maximum depositional age much older than the onset of sediment accumulation |
Crystallization age – depositional age | Small | Medium, 10 – 50% within 150Ma | Large, < 5% within 150 Ma |
Graphical representation | |||
The colored zones within Figure 8-10 are simply bounded by constructed cumulative proportion curves of their corresponding setting from all around the world.[4] |
References
edit- ^ Davis, Donald W.; Williams, Ian S.; Krogh, Thomas E. (2003). Hanchar, J.M.; Hoskin, P.W.O. (eds.). "Historical development of U-Pb geochronology" (PDF). Zircon: Reviews in Mineralogy and Geochemistry. 53: 145–181. doi:10.2113/0530145.
- ^ Kosler, J.; Sylvester, P.J. (2003). Hanchar, J.M.; Hoskin, P.W.O. (eds.). "Present trends and the future of zircon in U-Pb geochronology: laser ablation ICPMS". Zircon: Reviews in Mineralogy and Geochemistry. 53 (1): 243–275. Bibcode:2003RvMG...53..243K. doi:10.2113/0530243.
- ^ a b c d e f g h i Fedo, C. M.; Sircombe, K. N.; Rainbird, R. H. (2003). "Detrital zircon analysis of the sedimentary record". Reviews in Mineralogy and Geochemistry. 53 (1): 277–303. Bibcode:2003RvMG...53..277F. doi:10.2113/0530277.
- ^ a b c d e f Cawood, P. A.; Hawkesworth, C. J.; Dhuime, B. (22 August 2012). "Detrital zircon record and tectonic setting". Geology. 40 (10): 875–878. Bibcode:2012Geo....40..875C. doi:10.1130/G32945.1. hdl:10023/3575.
- ^ a b Morton, Andrew C; Hallsworth, Claire R (March 1999). "Processes controlling the composition of heavy mineral assemblages in sandstones". Sedimentary Geology. 124 (1–4): 3–29. Bibcode:1999SedG..124....3M. doi:10.1016/S0037-0738(98)00118-3.
- ^ a b c d Condie, Kent C.; Belousova, Elena; Griffin, W.L.; Sircombe, Keith N. (June 2009). "Granitoid events in space and time: Constraints from igneous and detrital zircon age spectra". Gondwana Research. 15 (3–4): 228–242. Bibcode:2009GondR..15..228C. doi:10.1016/j.gr.2008.06.001.
- ^ Hawkesworth, C. J.; Dhuime, B.; Pietranik, A. B.; Cawood, P. A.; Kemp, A. I. S.; Storey, C. D. (1 March 2010). "The generation and evolution of the continental crust". Journal of the Geological Society. 167 (2): 229–248. Bibcode:2010JGSoc.167..229H. doi:10.1144/0016-76492009-072. S2CID 131052922.
- ^ a b c d e f g Gehrels, G. (12 August 2010). UThPb analytical methods for Zircon. Arizona LaserChron Center. Retrieved 10 November 2016, from https://drive.google.com/file/d/0B9ezu34P5h8eMzkyMGFlNjgtMDU0Zi00MTQyLTliZDMtODU2NGE0MDQ2NGU2/view?hl=en.
- ^ Smith, Moira; Gehrels, George (July 1994). "Detrital zircon geochronology and the provenance of the Harmony and Valmy Formations, Roberts Mountains allochthon, Nevada". Geological Society of America Bulletin. 106 (7): 968–979. Bibcode:1994GSAB..106..968S. doi:10.1130/0016-7606(1994)106<0968:DZGATP>2.3.CO;2.
- ^ DeGraaff-Surpless, K., McWilliams, M. O., Wooden, J. L., & Ireland, T. R. (2000). Limitations of detrital zircon data for provenance analysis: an example from the Methow Basin, Washington and British Columbia. In Geol Soc Am Abstr Progr (Vol. 32, No. 9).
- ^ Chisholm, E. I., Sircombe, K. N. and DiBugnara, D. L. 2014. Handbook of Geochronology Mineral Separation Laboratory Techniques. Record 2014/46. Geoscience Australia, Canberra. doi:10.11636/Record.2014.046
- ^ Morton, A. C.; Claoué-Long, J. C.; Berge, C. (1996). "SHRIMP constraints on sediment provenance and transport history in the Mesozoic Statfjord Formation, North Sea". Journal of the Geological Society. 153 (6): 915–929. Bibcode:1996JGSoc.153..915M. doi:10.1144/gsjgs.153.6.0915. S2CID 130260438.
- ^ Gehrels, G. E.; Dickinson, W. R.; Ross, G. M.; Stewart, J. H.; Howell, D. G. (1995). "Detrital zircon reference for Cambrian to Triassic miogeoclinal strata of western North America". Geology. 23 (9): 831–834. Bibcode:1995Geo....23..831G. doi:10.1130/0091-7613(1995)023<0831:dzrfct>2.3.co;2.
- ^ a b Gehrels, G. E. (2000). "Introduction to detrital zircon studies of Paleozoic and Triassic strata in western Nevada and northern California". Special Paper of the Geological Society of America. 347: 1–17.
- ^ Roback, R. C.; Walker, N. W. (1995). "Provenance, detrital zircon U-Pb geochronometry, and tectonic significance of Permian to Lower Triassic sandstone in southeastern Quesnellia, British Columbia and Washington". Geological Society of America Bulletin. 107 (6): 665–675. Bibcode:1995GSAB..107..665R. doi:10.1130/0016-7606(1995)107<0665:pdzupg>2.3.co;2.
- ^ Dodson, M. H.; Compston, W.; Williams, I. S.; Wilson, J. F. (1988). "A search for ancient detrital zircons in Zimbabwean sediments". Journal of the Geological Society. 145 (6): 977–983. Bibcode:1988JGSoc.145..977D. doi:10.1144/gsjgs.145.6.0977. S2CID 140654427.
- ^ a b c d Gehrels, G (2014). "Detrital zircon U-Pb geochronology applied to tectonics". Annual Review of Earth and Planetary Sciences. 42 (1): 127–149. Bibcode:2014AREPS..42..127G. doi:10.1146/annurev-earth-050212-124012.
- ^ a b c d e f g h i Corfu, F.; Hanchar, J. M.; Hoskin, P. W.; Kinny, P. (2003). "Atlas of zircon textures". Reviews in Mineralogy and Geochemistry. 53 (1): 469–500. Bibcode:2003RvMG...53..469C. doi:10.2113/0530469.
- ^ a b c Gehrels, G. (2011). Detrital zircon U‐Pb geochronology: Current methods and new opportunities. Tectonics of sedimentary basins: recent advances, 45–62.
- ^ Chakoumakos, BC; Murakami, T; Lumpkin, GR; Ewing, RC (1987). "Alpha-decay-induced fracturing in zircon: the transition from the crystalline to the metamict state". Science. 236 (4808): 1556–1559. Bibcode:1987Sci...236.1556C. doi:10.1126/science.236.4808.1556. PMID 17835739. S2CID 44648291.
- ^ Murakami, T; Chakoumakos, BC; Ewing, RC; Lumpkin, GR; Weber, WJ (1991). "Alpha-decay event damage in zircon". Am Mineral. 76: 1510–1532.
- ^ Krogh TE, Davis GL (1975) Alteration in zircons and differential dissolution of altered and metamict zircon. Carnegie Inst Washington Yrbk74:619–623
- ^ Crookes, W (1879). "Contributions to Molecular Physics in High Vacua. Magnetic Deflection of Molecular Trajectory. Laws of Magnetic Rotation in High and Low Vacua. Phosphorogenic Properties of Molecular Discharge". Philosophical Transactions of the Royal Society of London. 170: 641–662. Bibcode:1879RSPT..170..641C. doi:10.1098/rstl.1879.0076.
- ^ Ohnenstetter, D.; Cesbron, F.; Remond, G.; Caruba, R.; Claude, J. M. (1991). "Émissions de cathodoluminescence de deux populations de zircons naturels: tentative d'interprétation". Comptes Rendus de l'Académie des Sciences. 313 (6): 641–647.
- ^ Hanchar, JM; Miller, CF (1993). "Zircon zonation patterns as revealed by cathodoluminescence and backscattered electron images: Implications for interpretation of complex crustal histories". Chem Geol. 110 (1–3): 1–13. Bibcode:1993ChGeo.110....1H. doi:10.1016/0009-2541(93)90244-D.
- ^ a b Voice, P. J.; Kowalewski, M.; Eriksson, K. A. (2011). "Quantifying the timing and rate of crustal evolution: global compilation of radiometrically dated detrital zircon grains". The Journal of Geology. 119 (2): 109–126. Bibcode:2011JG....119..109V. doi:10.1086/658295. S2CID 128408445.
- ^ Welcome to Geochron | EarthChem. (n.d.). Retrieved 15 November 2016, from http://www.geochron.org/
- ^ Hiess, J.; Condon, D. J.; McLean, N.; Noble, S. R. (2012). "238U/235U systematics in terrestrial uranium-bearing minerals" (PDF). Science. 335 (6076): 1610–1614. Bibcode:2012Sci...335.1610H. doi:10.1126/science.1215507. PMID 22461608. S2CID 206538233.
- ^ Decay systems and geochronology II: U and Th. (4 December 2013). Retrieved 15 November 2016, from http://www.geo.cornell.edu/geology/classes/Geo656/656notes13/IsotopeGeochemistry Chapter3.pdf
- ^ Jaffey, A. H.; Flynn, K. F.; Glendenin, L. E.; Bentley, W. T.; Essling, A. M. (1971). "Precision measurement of half-lives and specific activities of U 235 and U 238". Physical Review C. 4 (5): 1889. doi:10.1103/physrevc.4.1889.
- ^ Steiger, R. H., & Jager, E. (1978). Subcommission on Geochronology: Convention on the use of decay constants in geochronology and cosmochronology.
- ^ Pupin, J. P. (1980). "Zircon and granite petrology". Contributions to Mineralogy and Petrology. 73 (3): 207–220. Bibcode:1980CoMP...73..207P. doi:10.1007/bf00381441. S2CID 96470918.
- ^ Wang, X.; Zhou, D. (2001). "A new equilibrium form of zircon crystal". Science in China Series B: Chemistry. 44 (5): 516–523. doi:10.1007/bf02880682.
- ^ Mattinson, J. M., Graubard, C. M., Parkinson, D. L., & McClelland, W. C. (1996). U‐Pb Reverse Discordance in Zircons: The Role of Fine‐Scale Oscillatory Zoning and Sub‐Micron Transport of Pb. Earth Processes: Reading the Isotopic Code, 355–370.
- ^ a b Dickinson, W. R.; Gehrels, G. E. (2009). "Use of U–Pb ages of detrital zircons to infer maximum depositional ages of strata: a test against a Colorado Plateau Mesozoic database". Earth and Planetary Science Letters. 288 (1): 115–125. Bibcode:2009E&PSL.288..115D. doi:10.1016/j.epsl.2009.09.013.
- ^ Gehrels, G.E.; Valencia, V.; Ruiz, J. (2008). "Enhanced precision, accuracy, efficiency, and spatial resolution of U-Pb ages by laser ablation–multicollector–inductively coupled plasma–mass spectrometry". Geochemistry, Geophysics, Geosystems. 9 (3): n/a. Bibcode:2008GGG.....9.3017G. doi:10.1029/2007GC001805.
- ^ Kober, B (1986). "Whole-grain evaporation for 207Pb/206Pb-age-investigations on single zircons using a double-filament thermal ion source". Contributions to Mineralogy and Petrology. 93 (4): 482–490. Bibcode:1986CoMP...93..482K. doi:10.1007/bf00371718. S2CID 129728272.
- ^ Hirata, T.; Nesbitt, R. W. (1995). "U-Pb isotope geochronology of zircon: Evaluation of the laser probe-inductively coupled plasma mass spectrometry technique". Geochimica et Cosmochimica Acta. 59 (12): 2491–2500. Bibcode:1995GeCoA..59.2491H. doi:10.1016/0016-7037(95)00144-1.
- ^ Nicoli, G., Moyen, J. F., & Stevens, G. (2016). Diversity of burial rates in convergent settings decreased as Earth aged. Scientific reports, 6.
- ^ a b Hawkesworth, C. J.; Dhuime, B.; Pietranik, A. B.; Cawood, P. A.; Kemp, A. I. S.; Storey, C. D. (2010). "The generation and evolution of the continental crust". Journal of the Geological Society. 167 (2): 229–248. Bibcode:2010JGSoc.167..229H. doi:10.1144/0016-76492009-072. S2CID 131052922.
- ^ Storey, B. C. (1995). "The role of mantle plumes in continental breakup: case histories from Gondwanaland". Nature. 377 (6547): 301–308. Bibcode:1995Natur.377..301S. doi:10.1038/377301a0. S2CID 4242617.