The 2N7000 is an N-channel, enhancement-mode MOSFETs used for low-power switching applications. [1]
Type | MOSFET Transistor |
---|---|
Working principle | N-channel |
Pin configuration | G = Gate, D = Drain, S = Source. The symbol doesn't always show the internal diode formed between the substrate and the source/drain/channel. |
Electronic symbol | |
![]() |
![](http://up.wiki.x.io/wikipedia/commons/thumb/e/ea/TO-92_2N7000.svg/220px-TO-92_2N7000.svg.png)
![](http://up.wiki.x.io/wikipedia/commons/thumb/9/99/TO-236AA_Front_Top.svg/220px-TO-236AA_Front_Top.svg.png)
The 2N7000 is a widely available and popular part, often recommended as useful and common components to have around for hobbyist use.[2]
Packaged in a TO-92 enclosure, the 2N7000 is rated to withstand 60 volts and can switch 200 millamps.
Applications
editThe 2N7000 has been referred to as a "FETlington" and as an "absolutely ideal hacker part."[3] The word "FETlington" is a reference to the Darlington-transistor-like saturation characteristic.
A typical use of these transistors is as a switch for moderate voltages and currents, including as drivers for small lamps, motors, and relays.[1] In switching circuits, these FETs can be used much like bipolar junction transistors, but have some advantages:
- high input impedance of the insulated gate means almost no gate current is required
- consequently no current-limiting resistor is required in the gate input
- MOSFETs, unlike PN junction devices (such as LEDs) can be paralleled because resistance increases with temperature, although the quality of this load balance is largely dependent on the internal chemistry of each individual MOSFET in the circuit
The main disadvantages of these FETs over bipolar transistors in switching are the following:
- susceptibility to cumulative damage from static discharge prior to installation
- circuits with external gate exposure require a protection gate resistor or other static discharge protection
- Non-zero ohmic response when driven to saturation, as compared to a constant junction voltage drop in a bipolar junction transistor
Other devices
editMany other n-channel MOSFETs exist. Some part number are 2N7002, BS170, 2N7002, VQ1000J, and VQ1000P. They may have different pin outs, packages, and electrical properties. The BS250P is "a good p-channel analog of the 2N7000."[4]
References
edit- ^ a b "2N7000/2N7002, VQ1000J/P, BS170" (PDF). Vishay Siliconix datasheet. Retrieved 28 March 2011.
- ^ H. Ward Silver (2005). Two-way radios & scanners for dummies. p. 237. ISBN 0-7645-9582-2.
- ^ Lancaster, Don (February 1986). "Hardware hacker". Modern Electronics. 3 (2). Richard Ross: 115. ISSN 0748-9889.
- ^ Lucio Di Jasio; Tim Wilmshurst; Dogan Ibrahim (2007). PIC microcontrollers. Newnes. p. 520. ISBN 978-0-7506-8615-0.
External links
edit- Application Notes for Experimenters
- Electric Field Sensor demonstrates extremely high gate impedance with a simple LED circuit
- Driving a single MOSFET Detailed description of usage of a similar MOSFET
- Datasheets
- 2N7000, 200mA, TO-92 case Archived 27 September 2007 at the Wayback Machine, On Semiconductor
- BS170, 500mA, TO-92 case Archived 24 October 2020 at the Wayback Machine, On Semiconductor
- 2N7002, 300mA, SOT-23 case, NXP Semiconductors
- NX7002AK, 300mA, SOT-23 case, NXP Semiconductors