Wikipedia

Avonside Engine Company

(Redirected from Avonside Engine Co.)

The Avonside Engine Company was a locomotive manufacturer in Avon Street, St Philip's, Bristol, England between 1864 and 1934. However the business originated with an earlier enterprise Henry Stothert and Company.

Origins

edit

The firm was originally started by Henry Stothert in 1837 as Henry Stothert and Company. Henry was the son of George Stothert (senior), founder of the nearby Bath engineering firm of Stothert & Pitt. Henry's brother, also named George, was manager of the same firm.

The company was given an order for two broad gauge (7 ft (2,134 mm)) 2-2-2 Firefly class express passenger engines Arrow and Dart, with 7 ft (2.1 m) driving wheels, delivered for the opening of the Great Western Railway (GWR) from Bristol to Bath on 31 August 1840. This was soon followed by an order for eight smaller 2-2-2 Sun class engines with 6 ft (1.8 m) driving wheels.

Stothert, Slaughter and Company

edit

Edward Slaughter joined the company in 1841, when it became known as Stothert, Slaughter and Company.[1] By 1844 their works were named "Avonside Ironworks". In 1846 built Avalanche the first of five six-coupled saddle tank banking engines for the GWR. 1846 also saw the delivery of six 2-2-2 tender locomotives for the opening of the Waterford and Limerick Railway in Ireland.[2] Another large order came for ten broad gauge passenger 4-2-2s with 7 ft 6 in drivers and eight goods engines from the Bristol and Exeter Railway for the independent operation of that line from 1 May 1849. In 1851 the company acquired a shipbuilding yard, of which Henry Stothert took charge as a separate undertaking.

Slaughter, Grüning and Company

edit

In 1856 Henry Grüning became a partner of Edward Slaughter at the locomotive works, which then became Slaughter, Grüning and Company.[3]

Avonside Engine Company Ltd

edit

In 1864, the time-limited partnership came to an end and the company took advantage of the Companies Acts and became the Avonside Engine Company Ltd, with Edward Slaughter still as managing director. Henry Gruning continued his involvement by becoming a director. As if to mark the occasion, the works received a large order (the first from the GWR for some years following the development of Swindon Works) for twenty 2-4-0 Hawthorn class engines with 6 ft drivers.

The Avonside Engine Company and its predecessors were unusual in that most of the production before 1880 consisted of main line locomotives largely for British railway companies but also for export. However, by 1881 main line locomotives were getting much bigger and exceeding the capacity of the manufacturing equipment. They made a positive decision to concentrate on the smaller industrial railway locomotive types for within the capacity of the existing plant. This change was to a degree forced on the company as a result of financial difficulties following Edward Slaughter's death. Edwin Walker of the Bristol Engineering firm Fox, Walker & Co. joined Avonside and endeavoured to turn the company round, but without success.

In 1899 the company built for the short lived North Mount Lyell Railway three 4-6-0s designed by David Jones (railway).

Re-organisation

edit

Walker was forced to liquidate the old company and form a new company with the same name to carry on the same business at the same address. At about this time the old firm of Fox, Walker & Co. was taken over by Thomas Peckett and became Peckett and Sons.[3]

Move to Fishponds

edit
Further information: Avonside Locomotive Works

In 1905 the Avonside firm left its historic home at St. Philips for a new plant at Fishponds but still with a small engine policy.[3]

Closure

edit

The company entered voluntary liquidation in 1934, with the goodwill and designs of the company were bought in 1935 by the Hunslet Engine Company.[3]

Locomotive types

edit

During the 1860s and 1870s the Avonside company built broad gauge and standard gauge engines for many British companies, large and small but they also built up a considerable export business. Detailed company records from this period have not survived.

Fairlie

edit
 
Fairlie locomotive James Spooner built for the Ffestiniog Railway in 1872.

This lack of records is particularly unfortunate in that the company was the largest British builder of the Fairlie articulated locomotive. Amongst the first to be built at Bristol was James Spooner built in 1872 for the Ffestiniog Railway. Although built to the same basic design as the remarkably successful Little Wonder built by George England and Co. in 1869, it incorporated many detailed improvements and became the prototype for subsequent Ffestiniog Railway engines built in that company's works at Boston Lodge.

In 1872 on the recommendation of Sir Charles Fox and Sons, Avonside built two large 42-ton 0-6-6-0T Fairlies for shipment to Canada, one each to the Toronto, Grey and Bruce Railway and the Toronto and Nipissing Railway. The Avonside Works Manager at the time these locomotives were built was Alfred Sacré, the brother of Charles Sacré Locomotive Engineer of the Manchester Sheffield & Lincolnshire Railway. Alfred Sacré trained under Archibald Sturrock at the Doncaster Plant of the Great Northern Railway and in 1872 moved from Avonside to the Yorkshire Engine Company, Sheffield where he built more Fairlie types.

Avonside locomotives were exported also to Uruguay, where two 1874 Fairlie type locomotives (plate numbers: 1032/33, 1034/35) worked in the Ferrocarril y Tranvía del Norte, at Montevideo.

In 1874, New Zealand Railways ordered two types of Double Fairlie locomotives from Avonside. Both the B class and E class Double Fairlies were fitted with Walschaerts valve gear. This was certainly the first use of this technology to be used in New Zealand, and is possibly the first time a British manufacturer has supplied it. The B class lasted in service until the late 1880s. The E class were officially written off in 1899, however, most were still in use during the first world war.

An 0-4-4T single Fairlie was built for the Swindon, Marlborough and Andover Railway in 1878. To use a valve gear that fitted entirely outside the wheels, leaving the space between the frames clear for the boiler, this was the first British-based locomotive to use Walschaerts valve gear.

In 1878–1879 on the recommendation of Robert Francis Fairlie Avonside built the R class of 18 0-6-4T single Fairlies for the New Zealand Government Railways. One, a single fairlie R class number 28 (of 1878) survives at Reefton.

Avonside Fairlie Works list.

Avonside issued a double works plate for each double Fairlie, however it is believed that this policy was not always adhered to.[4]

Fell

edit

Earlier in 1875 the company had built four powerful tank engines designed by a Swedish Engineer H.W. Widmark to operate on the Fell mountain railway system on the Rimutaka Incline in the North Island of New Zealand. These and two later engines of very similar design built by Neilson and Company handled the entire traffic for eighty years until the opening of the five mile long base tunnel in 1955. Widmark was an inventive engineer and patented a design of steam operated cylinder cocks which were of great use to Avonside on articulated locomotives since they dispensed with mechanical linkages.

4-6-0 types

edit

Avonside was a very early British builder of the 4-6-0 type of tender locomotive. Ten narrow gauge freight-hauling 4-6-0 locomotives, weighing from 20 to 25 tons, were supplied to the Toronto, Grey and Bruce Railway and the Toronto and Nipissing Railway. These very successful and reliable wood-burning locomotives pre-dated the first significant British domestic railway 4-6-0, the 'Jones Goods', by over 20 years.

Saddle tanks

edit
 
0-4-0ST No.1340 at Didcot

Between 1880 and 1930 Avonside are best remembered for the construction of 0-4-0STs and 0-6-0STs for industrial and dock shunting purposes.[5]

Internal combustion

edit

Avonside produced their first "Oil Motor" locomotive in 1913.[3] Diesel and petrol powered locomotives were included in their range right up to the end in 1935.

Preservation

edit
See also: List of preserved Avonside locomotives

Globally there are 63 Avonside locomotives preserved.[6]

United Kingdom

edit

The Industrial Railway Society record 34 Avonside locomotives extant in the United Kingdom as at 2008-11-01.[7]

Avonside Engine Company locomotives preserved in the UK include:

Ireland

edit

New Zealand

edit

Avonside Engine Company locomotives preserved in New Zealand include:

Brazil

edit

Avonside Engine Company locomotives preserved in Brazil include:

Belgium

edit
  • Avonside Engine co.ltd #1908 "Fred" from 1925. Operated originally at Buxton Lime works with #RS16. Today's she's operational at Stoomcentrum Maldegem.

Taiwan

edit
  • Avonside Engine Co 835 of 1871. It was used initially on the Shinbashi-Yokohama line - the first railway line in Japan. In 1901 it was moved to Formosa (now Taiwan) where it was in service until 1926. It is now on display with another locomotive enclosed in a transparent case at the 228 Peace Memorial Park. It is likely to be the oldest surviving Avonside locomotive.

See also

edit

References

edit
  1. ^ Shepherd (2009), p. 39.
  2. ^ Shepherd (2009), p. 38.
  3. ^ a b c d e Lodge, Trevor (March 2012). "A Brief Glimpse at Avonside". Industrial Railway Record. 208: 314–316.
  4. ^ The Fairlie Locomotive, Rowland A S Abbott, David & Charles 1970
  5. ^ Industrial Locomotive Society (1967), p. 80.
  6. ^ "Avonside Engine Co. Ltd". Steam Locomotive Information. steamlocomotive.info.
  7. ^ Industrial Locomotives: including preserved and minor railway locomotives. Vol. 15EL. Melton Mowbray: Industrial Railway Society. 2009. ISBN 978-1-901556-53-7.
  8. ^ "Cadbury Sidings". Photo by D.J. Norton. Retrieved 16 June 2010.
  9. ^ "What you'll find in Milestones Living History Museum". .hants.gov.uk. Archived from the original on 5 June 2012. Retrieved 25 May 2012.
  10. ^ "One in, One out at Cavan & Leitrim as Nancy steams". Steam Railway. 26 April 2019.
  11. ^ "Londonderry Port & Harbour Commissioners". Archived from the original on 11 September 2012. Retrieved 10 March 2012.

Sources

edit
 
Wikimedia Commons has media related to Avonside Engine Company locomotives.
  • Industrial Locomotive Society, (1967) Steam locomotives in industry, David and Charles
  • Lowe, J.W., (1989) British Steam Locomotive Builders, Guild Publishing
  • L.T.C. Rolt, A Hunslet Hundred, David & Charles, 1964, (Avonside Engine Company – pages 102–116).
  • Reed, P.J.T. (February 1953). White, D.E. (ed.). The Locomotives of the Great Western Railway, Part 2: Broad Gauge. Kenilworth: The Railway Correspondence and Travel Society. ISBN 0-901115-32-0. OCLC 650490992.
  • "The Fairlie Locomotive"; Rowland A S Abbott; pub. David & Charles, Newton Abbot, 1970.
  • "Narrow Gauge Through the Bush – Ontario's Toronto Grey & Bruce and Toronto and Nipissing Railways"; Rod Clarke; pub. Beaumont and Clarke with the Credit Valley Railway Company, Streetsville, Ontario, 2007.
  • Shepherd, Ernie (2009). The Atock/Attock Family: A Worldwide Railway Engineering Dynasty. Vol. 150. Oakwood Library of Railway History. ISBN 978-0853616818.
Retrieved from "https://en.wiki.x.io/w/index.php?title=Avonside_Engine_Company&oldid=1250410587"